@justeattakeaway/pie-css

PIE CSS

Table of Contents

1. Introduction
2. Installation
3. Using the pie-css CSS stylesheet in your web application
   1. JS or Framework import (via bundler)
   2. Nuxt
   3. Sass /SCSS
   4. Native HTML
4. What's included in the pie-css base stylesheet
5. Using the pie-css SCSS helpers (mixins & functions)
   1. Importing the pie-css SCSS helpers
   2. pie-css SCSS Helper Definitions
      • font-size()
      • @include media()
6. Testing
   • CSS
   • SCSS

Introduction

pie-css is a styling library that provides both a minimal set of CSS styles to help PIE Web Components display as intended on web applications, and a set of optional SCSS style helpers (mixins & functions) to help with common styling tasks.

It also includes the PIE design tokens (and HSL colour variants) as CSS variables, as these variables are used across the PIE component styles and therefore need to be imported when using the PIE Web Components.

Installation

To install pie-css, run the following on your command line:

# npm
npm i @justeattakeaway/pie-css

# yarn
yarn add @justeattakeaway/pie-css

---

Using the pie-css CSS stylesheet in your web application

pie-css provides a base stylesheet that sets up some basic styles used by the PIE Web Components. It is essential that this stylesheet is included in any application that uses PIE Web Components. The stylesheet provides a minimal set of styles for ensuring typography displayed as intended, while also importing the PIE design tokens that are used by our components.

Once installed, how you include these styles will largely depend on the type of application you are building (and your own preference), but here are a few examples.

JS or Framework import (via bundler)

One common way of importing the styles would be through a regular JS import as part of your application bundle.

import '@justeattakeaway/pie-css';

For example, in React (or NextJS), you could add the pie-css import to your App.js file:

import '@justeattakeaway/pie-css';

function App () {
    return (
        …
    );
}

export default App;

Similarly, in Vue 3, you will likely include it as part of your /src/main.ts file:

import { createApp } from 'vue';
import '@justeattakeaway/pie-css';
import App from './App.vue';

createApp(App).mount('#app');

Nuxt

If you are using Nuxt, you can import pie-css in your nuxt.config.js file.

For Nuxt v3, this would look like this:

// Nuxt v3
export default defineNuxtConfig({
    css: ['@justeattakeaway/pie-css'],
    …
});

For Nuxt v2, it is very similar, looking more like this:

export default {
    css: [
        '@justeattakeaway/pie-css',
    ],
    …
}

Sass / SCSS

If you are using Sass, you could import the CSS file as part of your styles directly.

@use 'node_modules/@justeattakeaway/pie-css/dist/index.css';

Native HTML

Of course, you could include the styles straight inside your HTML document – most likely you'd want to link to the /@justeattakeaway/pie-css/dist/index.css CSS file in the head of your HTML.

What's included in the pie-css base stylesheet

You can see the pre-compiled pie-css styles in the pie-css repo, but let's run through what's included.

PIE Design Tokens

A core dependency of our PIE Web Components are the PIE design tokens. These are imported in the pie-css styles, as well as tokens for HSL colour variants (which are useful when needing to lighten/darken colours).

box-sizing

We set box-sizing: border-box so that the CSS box model acts consistently when using PIE components.

Typography

There are a number of typographic CSS rules that we specify to help with font rendering. These are:

/*  These rules with smooth fonts. It makes fonts look crisp and clean on devices
that support it. */
text-rendering: optimizelegibility;
-webkit-font-smoothing: antialiased;
-moz-font-smoothing: antialiased;

/*  These are added to prevent text size adjustments in various browsers.
    In some browsers, such as iOS Safari, will try to increase the font-size
    when you rotate the screen. This can be jarring and break layouts.  */
-webkit-text-size-adjust: 100%;
text-size-adjust: 100%;

z-index variables

Some PIE Web Components use a z-index value to control how they stack on a webpage. These values are defined as CSS variables and are utilized internally.

In most cases, a webpage should follow the DOM's natural stacking order and the default z-index order assigned for each component. However, if you're creating custom components, refer to the following table to make sure they don't conflict with other components.

Token	Z-Index Value
--dt-z-index-dropdown	1000
--dt-z-index-fab	1000
--dt-z-index-tooltip	2000
--dt-z-index-popover	3000
--dt-z-index-bottom-sheet	4000
--dt-z-index-side-sheet	4000
--dt-z-index-modal	4000
--dt-z-index-cookie-banner	5000
--dt-z-index-toast	6000

---

Using the pie-css SCSS helpers (mixins & functions)

PIE CSS provides an optional set of SCSS helpers that are used by the PIE Web Components. These can also be used by web applications using SCSS, by importing the helpers into their project.

These helpers are for carrying out common tasks when interacting with the PIE design tokens, such as setting font sizes and media-queries in a consistent way, and for sharing styles definitions via SCSS mixins and functions.

One common example is to add unit suffixes (such as px) to the end of font-size declarations, as these are imported as unit-less values from our design tokens.

Importing the pie-css SCSS helpers

Ensure you have installed pie-css as set out in the installation section.

Once you have done this, you can then import the helpers by writing the following in your SCSS:

@use '@justeattakeaway/pie-css/scss' as *;

// or to namespace the mixins and functions, to avoid collisions
// import the helpers while defining a namespace
@use '@justeattakeaway/pie-css/scss' as p;

You should now be able to use the pie-scss helpers in that SCSS scope.

Be aware that if you want to set this up globally across your application, you'll need to add this import to your application SCSS config, but it's recommended to @use the helpers only in the SCSS files that use them on your project.

pie-css SCSS Helper Definitions

font-size()

Used to reference design token font variables to add px unit values.

font-size can be used as a mixin to output the full style declaration, or as a function when you would like to assign the design token to a CSS variable.

// Use the font-size() mixin
.c-label {
  @include font-size(--dt-font-body-s-size);
}
// Outputs:
.c-label {
  font-size: calc(var(--dt-font-body-s-size) * 1px);
}

// Use the font-size function
--body-font-size: #{font-size(--dt-font-body-s-size)};

.c-label {
  font-size: var(--body-font-size);
}

// Outputs:
--body-font-size: calc(var(--dt-font-body-s-size) * 1px);

.c-label {
  font-size: var(--dt-font-body-s-size);
}

@include media()

For media queries, we use an SCSS helper library called include-media.

This library allows you to setup shortcut names for common breakpoints and provides a nicer syntax for working with media queries through the use of logical operators (such as >= and <=).

As part of the pie-css SCSS helpers, we setup the breakpoint shortcut names such that:

$breakpoints: (
    xs: 320px,
    sm: 600px,
    md: 768px,
    lg: 1024px,
    xl: 1280px,
    xxl: 1440px
);

You can then use these in your SCSS like so:

@use '@justeattakeaway/pie-css/scss' as *;

.c-formField {
  color: red;

  @include media('>=sm') {
    color: blue;
  }
}

// Outputs:
.c-formField {
  color: red;
}
@media (min-width: 600px) {
  .c-formField {
    color: blue;
  }
}

It also lets you write nice expressions like this:

.c-formField {
  // target between sm and md breakpoints on retina2x devices
  @include media('>=sm', '<=md', 'retina2x') {
    color: purple;
  }
}

To see the full list of features include-media provides, check out their website.

Other SCSS helpers

We will be writing more in-depth docs on all of our SCSS helpers shortly, but for now, feel free to browse the SCSS code in the PIE mono-repo – or reach out to one of the DS team who can take you through what's available.

---

Testing

We strive to ensure all styles are appropriately tested. How we test the styles differs for CSS and SCSS. Below, we outline both approaches.

[!WARNING] Any pull requests that fail to test newly added or altered styling will likely be rejected. Please do ensure that tests have been added before raising a pull request.

CSS

For our raw CSS styles, we test two things:

1. Ensure that all our our CSS passes W3C CSS validation. This is done by reading the built CSS file and making a network request to the W3C validation service.

2. Ensure that our CSS output is what we expect via snapshot testing. We use some tools such as PostCSS to generate the output, so we want to ensure that we catch any regressions before our consumers do!

[!NOTE] Our CSS tests can be found under /test/css.

SCSS

Our SCSS styles are tested in a number of ways:

1. Unit tests to ensure that our SCSS mixins and functions output the expected CSS. These unit tests are written using vitest. What we do is write out a string of SCSS that calls the SCSS code we want to test and then run it through a compiler function to generate CSS. We then compare the output CSS to what we expect. This is done for all SCSS. To make things easier, we strip whitespace from the compiled CSS we test.

2. Ensure that all of the compiled CSS passes W3C CSS validation. This is done by compiling the SCSS to CSS and then making a request to the W3C validation service. Because we do not want to spam network requests, we add all the SCSS to ./test/scss/validityTest.scss and use that file to compile during the test.

[!NOTE] Our SCSS tests can be found under /test/scss.