ttystudio
A terminal-to-gif recorder minus the headaches.
Record your terminal and compile it to a GIF or APNG without any external dependencies, bash scripts, gif concatenation, etc.
Install with: $ npm install ttystudio
. (Add -g
for global install).
Usage
$ ttystudio output.gif --log$ vimhello world:q!$ ^Q # stop recording with ctrl-qinitializing writerwriting imagewriting headwriting frame 0 - 132 leftwriting frame 1 - 131 leftwriting frame 2 - 130 left...writing frame 131 - 1 leftwriting eofwrote image to /home/chjj/output.gif$ chromium output.gif# or if you wrote to output.png (an APNG)$ firefox output.png
The Difference
ttystudio differs from other terminal recorders in that:
- It has its own built-in gif and apng writer, no imagemagick required. The writer now has built-in frame offset optimization.
- It has a font parser to render the font during image writing so no terminal playback is required when writing the image (this also means no GUI is required at all - you can record on a remote machine via ssh).
- No concatenation of hundreds of gif files required. ttystudio automatically writes out to one gif or apng.
- No glitchy frames due to imperfect GUI recording of the playback or gif concatenation.
- ttystudio will record frames even if nothing is being updated on the screen.
This project has ended up making use of years of work I've done writing terminal libraries (my personal obsession). Once all the pieces were there, this project became possible. It also sprang out of a need to find a terminal-to-gif recorder that actually worked.
(NOTE: The above .gif was recorded with ttystudio - nested ttystudio instances cause a slight glitch where the cursor is not visible. Not to matter in most cases).
More Usage
$ ttystudio output.gif --log # record and compile$ ttystudio frames.json --log # record$ ttystudio frames.json output.gif --range=0-50 # compile
Use a frames.json file
$ ttystudio --record frames.json --interval=100 # grab each frame on a 100ms interval$ vimhello world:q!$ ^Q # stop recording with ctrl-q$ ttystudio --compile frames.json output.gif --logparsing jsoninitializing writerwriting imagewriting headwriting frame 0 - 132 leftwriting frame 1 - 131 leftwriting frame 2 - 130 left...writing frame 131 - 1 leftwriting eofwrote image to /home/chjj/output.gif$ chromium output.gif# or if you wrote to output.png (an APNG)$ firefox output.png
How it works
$ ttystudio --record frames.json
: blessed+term.js+pty.js will spawn a pseudo-terminal to let you record until you press ^Q.$ ttystudio --compile frames.json output.gif
: ttystudio will parse each set of frames into a bitmap, keeping in mind the foreground color and character in each cell.- It will use its parsed font (terminus-u14n/b by default) to render pixels for each characters in the image.
- It will write out each frame to a .gif or .png file of your choice.
It's that simple. No bash script to run. No gifs to concatenate. No external dependencies required (i.e. ffmpeg or imagemagick) - ttystudio does it all on its own, in 99% javascript (aside from pty.js which is a node c++ binding to spawn terminals).
Options and Examples
Compiling to APNG:
$ ttystudio frames.json output.png --log
Accidentally recorded something you don't want in your image? The range
option can help:
# compile only frames 5 to 130$ ttystudio frames.json output.gif --log --range=5-130
The delay
option sets the delay between frames in the final image:
# 100ms between output frames$ ttystudio frames.json output.png --log --delay=100
The --no-palette/--rgba
option can be used to avoid use a global palette
(color type 3) when compiling APNGs (this is known to cause high memory usage
when building the palette since it has to parse every frame beforehand).
Instead, it will use color type 6 (RGBA). This will make the APNG larger, but
does not risk OOMing the process. OOMing the process is unlikely to happen, but
if it does, this option is here. Use pngcrush
afterwards to optimize.
$ ttystudio frames.json output.png --log --rgba
Piping:
$ ttystudio frames.json - | feh -
Replaying frames in the terminal:
$ ttystudio --play frames.json
Adding a border:
# explanation of arguments:$ ttystudio output.gif --log --border=[width],[r],[g],[b],[a]# add a red border:$ ttystudio output.gif --log --border=10,255,0,0,255# white border:$ ttystudio output.gif --log --border=10,255$ ttystudio output.gif --log --border=10,255,255,255$ ttystudio output.gif --log --border=10
Start in screenshot mode. This allows you to take multiple screenshot whenever
C-p
is pressed. ttystudio will write them all to separate images.
$ ttystudio o.gif --screenshot --screenshot-key C-p
Full Options List
-
-l, --log
- Log status to stderr (now default).
-
-q, --quiet
- Do not log status to stderr.
-
-f, --font [font-file]
- Choose a BDF font in ttystudio's JSON format.
-
-b, --font-bold [font-file]
- Choose a bold BDF font in ttystudio's JSON format.
-
-d, --delay [delay-ms]
- Specify frame delay in ms (default: 100).
-
-i, --interval [interval-ms]
- Specify frame snapshot interval in ms (default: 100).
-
-k, --key [quit-key]
- Choose a key combination to quit recording (default: C-q).
-
-n, --num-plays [num-plays]
- Specify a number of plays for the animation (default: 0 - infinite).
-
-r, --range [frame-range]
- Choose a range of frames to compile. e.g. 5-200.
-
-x, --ratio [pixel-cell-ratio]
- Choose pixel to cell ratio. This option is useless right now since it is overwritten by the font (default: 8x14).
-
-t, --term [term-name]
- Choose the terminal name for terminfo.
-
--palette
- Use a global palette for APNGs instead of RGBA.
-
--no-palette, --rgba, --lct
- Use RGBA for APNGs instead of a global palette. This will also avoid building a global palette for GIFs and only use a local color table for each frame.
-
--border [width,r,g,b,a]
- Add a border around the animation using the specified parameters.
-
play, --play
- Replay a frames file in the terminal.
-
record, --record
- Explicitly choose to record (not very useful).
-
compile, --compile
- Explicitly choose to compile (not very useful).
-
screenshot, --screenshot
- Start ttystudio in screenshot mode. It will take a screenshot on
C-p
unless specified otherwise by--screenshot-key
.
- Start ttystudio in screenshot mode. It will take a screenshot on
-
--screenshot-key
- Set the screenshot key when in screenshot mode. Default is
C-p
.
- Set the screenshot key when in screenshot mode. Default is
-
--version
- Display ttystudio version.
-
-h, --help
- Display help information.
Choosing a new font for your terminal recording
Since ttystudio does not record a GUI, it needs to know which font you want to use (it has no real idea of the font your terminal is using). ttystudio uses terminus (ter-u14n/b) by default, but you can change this.
Your font must be in BDF format. Once you have your font ready,
place it in the fonts/
directory in ttystudio and run $ make
.
ttystudio+pxxl.js will convert the .bdf
font to a glyph bitmap format in a
json file, which is what ttystudio uses.
$ cp ~/ter-u12n.bdf ~/ttystudio/fonts/$ cp ~/ter-u12b.bdf ~/ttystudio/fonts/$ cd ~/ttystudio/fonts$ make...$ ttystudio output.gif --log \--font ~/ttystudio/fonts/ter-u12n.json \--font-bold ~/ttystudio/fonts/ter-u12b.json
OSX
pty.js seems to currently be causing sporadic input lag on OSX. This is being investigated.
Notes
A special thanks to the folks who developed pxxl.js - a BDF font parser. Without them, it would not have been possible to render a reasonable looking font to the output gif/png.
Todo
- More fonts and font formats supported.
- Antialiased fonts.
- Emit frames as events in writers.
Contribution and License Agreement
If you contribute code to this project, you are implicitly allowing your code
to be distributed under the MIT license. You are also implicitly verifying that
all code is your original work. </legalese>
License
Copyright (c) 2015, Christopher Jeffrey. (MIT License)
See LICENSE for more info.