rc-switch-he

node-rcswitch-he

Node bindings for the rcswitch RaspberryPi port.

Requirements

• Like the C++ version of rcswitch, WiringPi must be installed in order to compile.
• Both the data and the power Pins of the 315/433Mhz emitter must be connected to the RPi. Note the number of the WiringPi data Pin. (see http://wiringpi.com/pins/)
• The node command must be run with root access

Usage

var rcswitchhe = require('rc-switch-he'); // Might throw an error if wiring pi init failed (no root)
 
rcswitchhe.enableTransmit(0); // Use data Pin 0
rcswitchhe.switchOn(12345678,1); // Switch on the first unit of 12345678 group
rcswitchhe.switchOff(12345678,2); // Switch off the second unit of 12345678 group

API

Configuration

rcswitchhe.enableTransmit(pin)

Enable transmission on the given pin (make it an OUTPUT). Must be called before any other functions.

• pin - (Number) data Pin to use following the WiringPi schema

Return true if pin is an integer, false otherwise.

rcswitchhe.setRemoteCode(remoteCode)

• remoteCode - (Number) remote code using by Raspberry Pi to control devices

Return true.

rcswitchhe.switchOn(switch)

Switch a remote switch on

• switch - (Number) switch number

Return true.

rcswitchhe.switchOff(switch)

Switch a remote switch off

• switch - (Number) switch number

Return true.

Release History

• 0.1.0 Initial release
• 0.1.1 Node cpp correction
• 0.1.2 Change documentation
• 0.1.4 New version using nan
• 0.1.5 Nan bindings
• 0.1.6 Enable transmit
• 0.1.7 SetRemoteCode
• 0.1.8 SetRemoteCode private
• 0.1.9 Remove wiringPiSetup because used by rcswitch