Have opinions about JavaScript? We want to hear them. Take the 2018 JavaScript Ecosystem Survey »

pimatic-led-light

0.9.5 • Public • Published

pimatic-led-light

A pimatic plugin for LED lights resp. LED-Stripes. Currently supported:

Installation

To install the plugin on a Debian or Raspbian system libudev-dev must be installed.

sudo apt-get install libudev-dev

Configuration

For IwyMaster

    {
      "id": "some_id",
      "name": "some_name",
      "class": "IwyMaster",
      "addr": "xxx.xxx.xxx.xxx"
    }

For Wifi370

    {
      "id": "some_id",
      "name": "some_name",
      "class": "Wifi370",
      "addr": "xxx.xxx.xxx.xxx"
    }

For Milight

    {
      "id": "some_id",
      "name": "some_name",
      "class": "Milight",
      "addr": "xxx.xxx.xxx.xxx",
      "zone": "Zone [0 - 4], 0 = switches all zones"
    }

For MilightRF24

    {
      "id": "some_id",
      "name": "some_name",
      "class": "MilightRF24",
      "port": "/dev/ttyUSB1",
      "zones": [
          {
            "addr": "5927",
            "zone": 0,
            "send": true,
            "receive": true
          },
          {
            "addr": "485D",
            "zone": 0,
            "send": true,
            "receive": true
          }
        ]
      }

You will get your addr when you just add the parameter MilightRF24Port to your config and switch to the debug output in pimatic and change some settings with your remote.

You need for example an arduino nano and connect it to an nrf24 using the standard SPI wiring. Get the sketch from here https://github.com/henryk/openmili and change the CE and CSN pin to your wiring.

For Blinkstick

    {
      "id": "some_id",
      "name": "some_name",
      "class": "Blinkstick",
      "serial": "xxx" // Only required if more than one Blinkstick is connected to the host.
    }

For Hyperion

    {
      "id": "some_id",
      "name": "some_name",
      "class": "Hyperion",
      "addr": "xxx.xxx.xxx.xxx",
      "priority": 100 // Only if you want to change the used priority, default is 100.
    }

For Yeelight Wifi Color Bulbs

    {
      "id": "some_id",
      "name": "some_name",
      "class": "Yeelight",
      "addr": "xxx.xxx.xxx.xxx"
    }

Features

  • switch on/off (UI and rules)
  • dim light (UI)
  • set color
    • by color picker (in UI)
    • by name (in rules e.g. red)
    • by hex (in rules e.g. #00FF00)
    • by temperature variable from weather plugin (in rules e.g. $weather.temperature)

Keywords

none

install

npm i pimatic-led-light

Downloadsweekly downloads

56

version

0.9.5

license

GPL-2.0

homepage

github.com

repository

Gitgithub

last publish

collaborators

  • avatar
  • avatar
Report a vulnerability