grunt-nose

Running python unit tests using nose.

Getting Started

This plugin requires Grunt > 0.4.1 to be installed.

If you haven't used Grunt before, be sure to check out the Getting Started guide, as it explains how to create a Gruntfile as well as install and use Grunt plugins. Once you're familiar with that process, you may install this plugin with this command:

npm install grunt-nose --save-dev

Once the plugin has been installed, it may be enabled inside your Gruntfile with this line of JavaScript:

grunt.loadNpmTasks('grunt-nose');

The "nose" task

Overview

In your project's Gruntfile, add a section named nose to the data object passed into grunt.initConfig().

grunt.initConfig({
  nose: {
    options: {
      // Task-specific options go here.
    },
    your_target: {
      // Target-specific file lists and/or options go here.
    },
  },
})

Options

The nose task accepts all the same options as the nose CLI does. If you want to run nose with any additional plugins (like coverage or similar), you must install them separately, either into your system environment or into a virtualenv, and run the grunt task in the virtualenv.

verbose

Type: Boolean
Default: false

Be more verbose.

quiet

Type: Boolean
Default: false

Be less verbose.

config

Type: String or Array

Load configuration from config file(s). May be specified multiple times; in that case, all config files will be loaded and combined

py3where

Type: String

Look for tests in this directory under Python 3.x. Functions the same as 'where', but only applies if running under Python 3.x or above. Note that, if present under 3.x, this option completely replaces any directories specified with 'where', so the 'where' option becomes ineffective.

match

Type: String
Default: "(?:^|[\b_./-])[Tt]est"

Files, directories, function names, and class names that match this regular expression are considered tests.

tests

Type: Array
Default: Runs all tests found

Run these tests (the array should be names of modules), and no others.

debug

Type: Array or String

Activate debug logging for one or more systems. Available debug loggers: nose, nose.importer, nose.inspector, nose.plugins, nose.result and nose.selector.

debug_log

Type: String
Default: sys.stderr

Log debug messages to this file.

log_config

Type: String

Load logging config from this file -- bypasses all other logging config settings.

ignore_files

Type: String or Array

Completely ignore any file that matches this regular expression. Takes precedence over any other settings or plugins. Specifying this option will replace the default setting. Specify this option as an array to add more regular expressions.

exclude=REGEX

Type: String

Don't run tests that match regular expression

include=REGEX

Type: String or Array

This regular expression will be applied to files, directories, function names, and class names for a chance to include additional tests that do not match options.match. Specify this option as an array to add more regular expressions.

stop

Type: Boolean
Default: false

Stop running tests after the first error or failure

no_path_adjustment

Type: Boolean
Default: false

Don't make any changes to sys.path when loading tests

exe

Type: Boolean
Default: false

Look for tests in python modules that are executable. Normal behavior is to exclude executable modules, since they may not be import-safe.

noexe

Type: Boolean

DO NOT look for tests in python modules that are executable. (The default on the windows platform is to do so.)

traverse_namespace

Type: Boolean
Default: false

Traverse through all path entries of a namespace package.

first_package_wins

Type: Boolean
Default: false

nose's importer will normally evict a package from sys.modules if it sees a package with the same name in a different location. Set this option to disable that behavior.

no_byte_compile

Type: Boolean default: false

Prevent nose from byte-compiling the source into .pyc files while nose is scanning for and running tests.

attr

Type: String

Run only tests that have attributes specified by attr.

eval_attr

Type: String

Run only tests for whose attributes the Python expression EXPR evaluates to True.

nocapture

Type: Boolean
Default: false

Don't capture stdout (any stdout output will be printed immediately).

nologcapture

Type: Boolean
Default: false

Disable logging capture plugin. Logging configurtion will be left intact.

logging_format

Type: String

Specify custom format to print statements. Uses the same format as used by standard logging handlers.

logging_datefmt

Type: String

Specify custom date/time format to print statements. Uses the same format as used by standard logging handlers.

logging_filter

Type: String

Specify which statements to filter in/out. By default, everything is captured. If the output is too verbose, use this option to filter out needless output. Example: filter=foo will capture statements issued ONLY to foo or foo.what.ever.sub but not foobar or other logger. Specify multiple loggers with comma: filter=foo,bar,baz. If any logger name is prefixed with a minus, eg filter=-foo, it will be excluded rather than included. Default: exclude logging messages from nose itself (-nose). Can also be specified by envvar NOSE_LOGFILTER.

logging_clear_handlers

Type: Boolean
Default: false

Clear all other logging handlers

logging_level

Type: String
Default: 'DEBUG'

Set the log level to capture

with_coverage

Type: Boolean
Default: false

Enable plugin Coverage: Activate a coverage report using Ned Batchelder's coverage module. Requires coverage to be installed separetly, f. ex in a virtualenv specified by options.virtualenv.

cover_package

Type: String
Default: All packages

Restrict coverage output to selected packages

cover_erase

Type: Boolean
Default: false

Erase previously collected coverage statistics before run.

cover_tests

Type: Boolean
Default: false

Include test modules in coverage report.

cover_min_percentage

Type: Number
Default: 0

Minimum percentage of coverage for tests to pass.

cover_inclusive

Type: Boolean
Default: false

Include all python files under working directory in coverage report. Useful for discovering holes in test coverage if not all files are imported by the test suite.

cover_html

Type: Boolean
Default: false

Produce HTML coverage information.

cover_html_dir

Type: String

Produce HTML coverage information in dir.

cover_branches

Type: Boolean
Default: false

Include branch coverage in coverage report.

cover_xml

Type: Boolean
Default: false

Produce XML coverage information.

cover_xml_file

Type: String

Produce XML coverage information in file.

pdb

Type: Boolean
Default: false

Drop into debugger on errors. Pass in a EOF to end the session (Ctrl+D on Mac).

pdb_failures

Type: Boolean
Default: false

Drop into debugger on failures.

no_deprecated

Type: Boolean
Default: false

Disable special handling of DeprecatedTest exceptions.

with_doctest

Type: Boolean
Default: false

Enable plugin Doctest: Activate doctest plugin tofind and run doctests in non-test modules.

doctest_tests

Type: Boolean
Default: false

Also look for doctests in test modules. Note that classes, methods and functions should have either doctests or non-doctest tests, not both.

doctest_extension

Type: String
Default: false

Also look for doctests in files with this extension.

doctest_result_variable

Type: String

Change the variable name set to the result of the last interpreter command from the default '_'. Can be used to avoid conflicts with the _() function used for text translation.

doctest_fixtures

Type: String

Find fixtures for a doctest file in module with this name appended to the base name of the doctest file.

doctest_options

Type: String

Specify options to pass to doctest. Eg. '+ELLIPSIS,+NORMALIZE_WHITESPACE'.

with_isolation

Type: Boolean
Default: false

Enable plugin IsolationPlugin: Activate the isolation plugin to isolate changes to external modules to a single test module or package. The isolation plugin resets the contents of sys.modules after each test module or package runs to its state before the test. PLEASE NOTE that this plugin should not be used with the coverage plugin, or in any other case where module reloading may produce undesirable side-effects.

detailed_errors

Type: Boolean
Default: false

Add detail to error output by attempting to evaluate failed asserts.

with_profile

Type: Boolean
Default: false

Enable plugin Profile: Use this plugin to run tests using the hotshot profiler.

profile_sort

Type: String

Set sort order for profiler output.

profile_stats_file

Type: String

Profiler stats file; default is a new temp file on each run.

profile_restrict

Type: String

Restrict profiler output. See help for pstats.Stats for details.

no_skip

Type: Boolean
Default: false

Disable special handling of SkipTest exceptions.

with_id

Type: Boolean
Default: false

Enable plugin TestId: Activate to add a test id (like #1) to each test name output. Activate with options.failed to rerun failing tests only.

id_file

Type: String

Store test ids found in test runs in this file. Default is the file .noseids in the working directory.

failed

Type: Boolean
Default: false

Run the tests that failed in the last test run.

processes

Type: Number
Default: 0

Spread test run among this many processes. Set a number equal to the number of processors or cores in your machine for best results. Pass a negative number to have the number of processes automatically set to the number of cores. Passing 0 means to disable parallel testing. Default is 0 unless NOSE_PROCESSES is set.

process_timeout

Type: Number
Default: 10

Set timeout for return of results from each test runner process.

process_restartworker

Type: Boolean
Default: false

If set, will restart each worker process once their tests are done, this helps control memory leaks from killing the system.

virtualenv

Type: String

Run the unit tests in this virtualenv.

externalNose

Type: Boolean
Default: false

Use nose modules from python interpreter in path.

with_xunit

Type: Boolean
Default: false

Enable plugin Xunit: This plugin provides test results in the standard XUnit XML format.

xunit_file

Type: String
Default: 'nosetests.xml'

Path to xml file to store the xunit report in.

all_modules

Type: Boolean
Default: false

Enable plugin AllModules: Collect tests from all python modules.

collect_only

Type: Boolean
Default: false

Enable collect-only: Collect and output test names only, don't run any tests.

Usage Examples

In the simplest case, run nose without any arguments at all. This would make nose scan for tests, and execute whatever it finds.

grunt.initConfig({
  nose: {
    main: { }
  },
})

A bit more practical though is to utilize some of the power of nose, so if we want code coverage in HTML, we're writing doctests, and we'd like to see the results as a XUnit report, do the following: (note that coverage must be installed separatly, f. ex in a virtualenv specified by options.virtualenv)

grunt.initConfig({
  nose: {
    options: {
      virtualenv: 'my_app_venv',
      with_coverage: true,
      cover_package: "mypackage",
      cover_branches: true,
      cover_xml: true,
      coverage_html: true,
      coverage_html_dir: 'code_coverage',
      with_doctest: true,
      with_xunit: true,
    },
  },
})

Contributing

To fetch the nose libs, run npm run-script devsetup, that should install everything you need.

In lieu of a formal styleguide, take care to maintain the existing coding style. Add unit tests for any new or changed functionality. Lint and test your code using Grunt.

Changelog

v1.1.0 (2016-12-04)

Remove peer dependency on grunt
Update bundled nose to 1.3.7

v1.0.1 (2016-02-20)

Make compatible with grunt 1.0

v1.0.0 (2015-03-11)

Enable loading tests from several directories (issue #11)
Update bundled nose to 1.3.4

v0.4.0 (2013-03-01)

Use python executable from virtualenvs.

v0.3.1 (2013-02-10)

Fix bug with the 'config' option.

v0.3.0 (2014-02-10)

Remove grunt.util._-usage.

v0.2.0 (2014-02-03)

Add option externalNose to not use the included nose.

v0.1.9 (2013-10-25)

Distribute nose source along with the grunt-nose.