databank

1.0.9 • Public • Published

Databank

This package is an abstraction tool for document stores or key-value stores in Node.js.

My goal is to hedge my bets by using a simple CRUD + search interface for interacting with a datastore. If at some point I really need the special snowflake features of Redis or MongoDB or Cassandra or Riak or whatever, I should be able to bust out of this simple abstraction and use their native interface without rewriting a lot of code.

I also want the data structures stored to look roughly like what someone experienced with the datastore would expect.

I chose the name "databank" since it's not in widespread use and won't cause name conflicts, and because it sounds like something a 1960s robot would say.

As a note: I've used this library for a couple of big projects, and mostly it just works.

License

Copyright 2011-2014 E14N https://e14n.com/

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Drivers

The point of the Databank interface is so applications can use one interface for developing persistence code, and then at deployment time you can decide what driver to use.

There are three drivers included in this package: 'memory', 'partitioning', and 'caching'. The first is great for development but pretty bad for production.

There are a few drivers not in this package. You can search for them on npm; they all start with 'databank-'. So, 'databank-leveldb', 'databank-mongodb', 'databank-memcached', 'databank-redis', 'databank-disk'.

Installation

I'm still not 100% on this, so comments welcome. I'd love better instructions.

At deployment time, if you want to use a particular driver, it's going to need to be available to the 'databank' libraries so that Databank.get() can find it. This means you have two options:

  • Install the driver globally, like npm install -g databank-redis. This is probably OK as long as you don't have version conflicts between apps.

  • Install the driver in the databank dir, like so:

    npm install databank

    cd node_modules/databank/

    npm install databank-redis

If you're still stuck, there's a Databank.register() method that will let you associate a databank driver class with a driver name. That's probably only a last resort, though.

Built-in drivers

The built-in drivers are documented in MEMORY.md, CACHING.md, and PARTITIONING.md respectively.

Schemata

This library assumes you have document "types" - like "person", "chair", "photo", "bankaccount", "trainreservation" -- that you can identify with a unique scalar key -- email address, URL, UUID, SSN, or whatever.

Your "document" is anything that can be JSON-encoded and decoded. Scalar, array and object/tree values are all totally cool.

Implementation classes that support schemata should support a "schema" element on the constructor params for Databank.get() (see below). A schema can have elements for each type, with the following elements:

  • pkey: the primary key element name.

  • indices: array of element names that should be indexed. You should really have an index on each element you search on frequently.

Dotted notation

In schemata you can use dotted-notation, a la MongoDB, to define fields that are part of parts of the object. For example, for an object like this:

{ email: "evan@e14n.com", name: { last: "Prodromou", first: "Evan" } }

...you may have a schema like this:

{ person: { pkey: "email", indices: ["name.last"] } }

Databank

The class has a static method for for initializing an instance:

  • get(driver, params)

    Get an instance of DriverDatabank from the module databank-driver and initialize it with the provided params (passed as a single object).

    This is the place you should usually pass in a schema parameter.

    var bank = Databank.get('redis', {schema: {person: {pkey: "email"}}});
    
    bank.connect({}, function(err) {
        if (err) {
            console.log("Couldn't connect to databank: " + err.message);
        } else {
            // ...
        }
    });
    

There's another static method to change how get() works:

  • register(driver, cls)

    Register a class to use when get() asks for driver. This is useful if for some reason your driver class isn't exported by the databank-driver package somewhere. (I mainly use this for unit-testing drivers.)

The databank interface has these methods:

  • connect(params, onCompletion)

    Connect to the databank. params may be used by the underlying server.

    onCompletion takes one argument: a DatabankError object. Null if no error.

  • disconnect(onCompletion)

    Disconnect from the databank. onCompletion takes one argument, a DatabankError.

  • create(type, id, value, onCompletion)

    Create a databank entry of type type with id id and content value.

    How type and id are mapped to keys or whatever in the DB is unspecified. Don't mix and match.

    onCompletion takes two arguments: a DatabankError (or null) and the created object. That created object may have some extra stuff added on.

    Common error type here is AlreadyExistsError.

    store.create('activity', uuid, activity, function(err, value) {
        if (err instanceof AlreadyExistsError) {
            res.writeHead(409, {'Content-Type': 'application/json'});
            res.end(JSON.stringify(err.message));
        } else if (err) {
            res.writeHead(400, {'Content-Type': 'application/json'});
            res.end(JSON.stringify(err.message));
        } else {
            res.writeHead(200, {'Content-Type': 'application/json'});
            res.end(JSON.stringify(value));
        }
    });
    
  • read(type, id, onCompletion)

    Read an object of type type with id id from the databank. onCompletion will get two arguments: a DatabankError (or null) and the object if found.

    Common error type here is NoSuchThingError if the databank has no such object.

    bank.read('Book', '978-0141439600', function(err, user) {
        if (err instanceof NoSuchThingError) {
            res.writeHead(404, {'Content-Type': 'application/json'});
            res.end(JSON.stringify(err.message));
        } else if (err) {
            res.writeHead(500, {'Content-Type': 'application/json'});
            res.end(JSON.stringify(err.message));
        } else {
            res.writeHead(200, {'Content-Type': 'application/json'});
            res.end(JSON.stringify(user));
        }
    });
    
  • update(type, id, value, onCompletion)

    Update the (existing) object of type type with id id in the databank. onCompletion will get two arguments: a DatabankError (or null) and the object if found.

    Common error type here is NoSuchThingError if the databank has no such object.

  • save(type, id, value, onCompletion)

    Either create a new object, or update an existing object. For when you don't care which.

  • del(type, id, onCompletion)

    Delete the object of type type with id id. onCompletion takes one argument, a DatabankError (null on success).

    "delete" is a keyword, so I decided not to use that.

  • search(type, criteria, onResult, onCompletion)

    Finds objects of type type which match criteria, a map of property names to exact value matches. onResult is called one time for each result, with a single argument, the object that matches the criteria. Use a collector array if you want all the results in an array.

    Property names can be dotted to indicate deeper structures; for example, this object:

    {name: {last: "Prodromou", first: "Evan"}, age: 43}

    would match the criteria {"name.last": "Prodromou"}.

    onCompletion takes one argument, a DatabankError. A search with no results will get a NoSuchThingError. I think this is the method most likely to elicit a NotImplementedError, since most key-value stores don't handle this kind of thing.

    You're also on your own on sorting.

    function getModerators(callback) {
        var results = [];
    
        bank.search('user', {role: 'moderator'}, function(result) {
                        results.push(result);
                    },
                    function(err) {
                        if (err) {
                            callback(err, null);
                        } else {
                            results.sort(function(a, b) {
                                return a.created - b.created;
                            });
                            callback(null, results);
                        }
                    });
    }
    
  • scan(type, onResult, onCompletion)

    Finds all objects of type type. onResult is called one time for each result, with a single argument, the object that matches the criteria. Use a collector array if you want all the results in an array.

    onCompletion takes one argument, a DatabankError. A search with no results will get a NoSuchThingError. I think this is the method most likely to elicit a NotImplementedError, since most key-value stores don't handle this kind of thing.

    This is probably most useful for off-line processing, like doing a backup or for initializing roll-up data. At scale, this may take days to complete. If you want to do something like searching a range, figure out a better way, like storing an array of matches at write time.

  • readAll(type, ids, onCompletion)

    Gets all the objects of type type with ids in the array ids. Results are an object mapping an id to the results. If an ID doesn't exist, the mapped value will be null.

    This is kind of like calling read over and over, but if the driver supports multiple reads in one call, it can be much more performant.

    onCompletion gets two arguments: an error, and the results map.

Integers

These are special shims for integer values.

  • incrBy(type, id, n, onCompletion)

    Increments the integer value of type and id by n steps. onCompletion takes two params: an error, and the resulting integer value. If integer value doesn't yet exists, goes to n.

    Defaults to a read and an update or create, but drivers can override to do an atomic increment.

  • decrBy(type, id, n, onCompletion)

    Decrements the integer value of type and id by n. onCompletion takes two params: an error, and the resulting integer value. If integer value doesn't yet exists, goes to -n.

    Defaults to incrBy with -1 * n, but drivers can override to do an atomic increment.

  • incr(type, id, onCompletion)

    Increments the integer value of type and id by one. onCompletion takes two params: an error, and the resulting integer value. If integer value doesn't yet exists, goes to 1.

    Defaults to incrBy with n = 1, but drivers can override to do an atomic increment.

  • decr(type, id, onCompletion)

    Decrements the integer value of type and id by one. onCompletion takes two params: an error, and the resulting integer value. If integer value doesn't yet exists, goes to -1.

    Defaults to decrBy with n = 1, but drivers can override to do an atomic decrement.

Arrays

These are special shims for array values.

  • append(type, id, toAppend, onCompletion)

    Appends the value toAppend to the array at type and id. onCompletion takes one param: an error. If array doesn't yet exists, it becomes a single-element array.

    Defaults to call appendAll, but drivers can override to do an atomic append.

  • prepend(type, id, toPrepend, onCompletion)

    Prepends the value toPrepend to the array at type and id. onCompletion takes one param: an error. If array doesn't yet exists, it becomes a single-element array.

    Defaults to call prependAll, but drivers can override to do an atomic prepend.

  • appendAll(type, id, items, onCompletion)

    Appends the values in array items to the array at type and id. onCompletion takes one param: an error. If array doesn't yet exists, it becomes a new array consisting of items.

    Defaults to a read and an update or create, but drivers can override to do an atomic append.

  • prependAll(type, id, items, onCompletion)

    Prepends the values in array items to the array at type and id. onCompletion takes one param: an error. If array doesn't yet exists, it becomes a new array consisting of items.

    Defaults to a read and an update or create, but drivers can override to do an atomic prepend.

  • item(type, id, index, onCompletion)

    Gets the value at index in the array at type and id. onCompletion takes two params: an error, and the resulting item value.

    Defaults to read the whole array and pluck out the value, but some drivers might support atomic query of just one item.

  • slice(type, id, begin, end, onCompletion)

    Like Array.slice(), gets the sub-array starting at index begin and ending at index end of the array at type and id. onCompletion takes two params: err for error, and results for the resulting slice.

    Defaults to read the whole array and pluck out the slice, but some drivers might support atomic query of a slice.

  • indexOf(type, id, item, onCompletion)

    Like Array.indexOf(), gets the first index of item in the array at type and id. onCompletion takes two params: err for error, and index for the resulting index. Will give an index of -1 (like Javascript) on a miss.

  • remove(type, id, item, onCompletion)

    Like Array.remove(), removes the first instance of item in the array at type and id. onCompletion takes one param: err for error. NOTE: removing an item that doesn't exist in the array does not generate an error.

    Defaults to call removeAll with item.

  • removeAll(type, id, items, onCompletion)

    Like Array.remove(), removes the first instance of each member of items in the array at type and id. onCompletion takes one param: err for error. NOTE: removing an item that doesn't exist in the array does not generate an error.

    Defaults to call removeAll with item.

  • length(type, id, onCompletion)

    Gets the length of the array value for type and id. Defaults to read but drivers can override to give atomic results. onCompletion takes two parameters: an err and the length results.

  • truncate(type, id, length, onCompletion)

    Truncates the array value for type and id to new length length. Defaults to read and update but drivers can override to give atomic results. onCompletion takes one parameters: an err.

DatabankError

This is a subclass of Error for stuff that went wrong with a Databank. Subclasses include:

  • NotImplementedError

    That doesn't work (yet).

  • NoSuchThingError

    The type/id pair you were trying to read/update/delete doesn't exist.

  • AlreadyExistsError

    The type/id pair you were trying to create does exist.

  • NotConnectedError

    You forgot to call connect first.

  • AlreadyConnectedError

    You already called connect.

  • NoSuchItemError

    There's no item in that array with that value.

  • WrongTypeError

    You tried to use one of the array operators on a non-array value.

DatabankObject

This is a utility class for objects you want to store in a Databank. To create the class, do this:

var MyClass = DatabankObject.subClass('mytype');

This will make an object class that stores data in the 'mytype' type. You can add more stuff to the class, of course.

The class's type is stored in MyClass.type.

The constructor takes an object as a parameter; it will copy all its properties from this object. Good for "classifying" JSON. So:

var json = getSomeJSONfromSomewhere();
var myInst = new MyClass(json);

Each class has the following class methods:

  • bank()

Gets the class's databank. Used internally for making queries. By default, gets the DatabankObject.bank property. If you want to change how this works, replace this function with... something else.

  • pkey()

Gets the class's primary key. By default, looks for a class attribute "schema" and tries to get the "pkey" element of that. Otherwise, it checks the class's schema, looks for an element that matches the type name, and tries to get pkey element of that. If that fails, it looks at the class's databank's "schema", and tries to get that. Otherwise, it just returns "id". Override if you have a better plan.

  • get(id, callback)

Get the object with primary key id and returns it to the callback.

  • search(criteria, callback)

Does a search for objects matching the criteria, collects them, and returns an array to callback.

  • scan(handler, callback)

Finds all objects of this type and calls handler on each one. At the end, fires callback with a single err parameter.

  • create(properties, callback)

Creates a new instance of class with properties and returns it to callback.

  • readAll(ids, callback)

Reads all objects from the databank with the given array of primary-key ids, and returns a map of {id: object}.

  • readArray(ids, callback)

Reads all objects from the databank with the given array of primary-key ids, and returns an array of objects in the same order.

Each instance has the following methods:

  • update(properties, callback)

For an existing object, update to the provided properties, and return the resulting object to callback. Note that you can use only a few properties; note that you can't use this method to remove properties.

  • del(callback)

Delete the object. callback takes a single error arg.

  • save(callback)

Save the current state of the object, and return it to callback. Will create new objects or update existing ones.

Hooks

When I started using this library, I found myself overloading the create(), update(), and save() methods to do extra things, like add an auto-generated ID or timestamp, or to expand attributes stored by reference. It was a little tricky, since I had to save off the default auto-created function, then define a new function that called that saved one.

To make this easier, I added a hooks mechanism. Now, every DatabankObject subclass has the option of hooking certain functionality without having to replicate the core functionality. Default values are all no-ops.

Class methods:

  • beforeCreate(props, callback)

Called before create(). A chance to add default values or validate. callback takes two args: an err, or the (possibly modified) props.

Instance methods:

  • afterCreate(callback)

Called after create(). Good chance to save references. callback takes one arg: an err.

  • beforeGet(id, callback)

Called before get(). I don't see a lot of reason to mess with this, but it's here if you need it. callback takes two args: an err, or the (possibly modified) id.

  • afterGet(callback)

Called after get(). Good chance to expand references. callback takes one arg: an err.

This is also called once for each instance returned in readAll().

  • beforeUpdate(props, callback)

Called before update(). Validate, preserve immutables, or add auto-generated properties. callback takes two args: an err and the (possibly modified) props.

  • afterUpdate(callback)

Called after update(). callback takes one arg: an err.

  • beforeDel(callback)

Called before del(). Maybe prevent deleting something important? Referential integrity? callback takes one arg: an err.

  • afterDel(callback)

Called after del(). Delete related stuff? callback takes one arg: an err.

  • beforeSave(callback)

Called before save(). Validate, preserve, autogenerate. callback takes one args: an err.

  • afterSave(callback)

Called after save(). callback takes one args: an err.

TODO

See https://github.com/e14n/databank/issues

Package Sidebar

Install

npm i databank

Weekly Downloads

10

Version

1.0.9

License

Apache-2.0

Unpacked Size

75.3 kB

Total Files

8

Last publish

Collaborators

  • evanp