bud-tls-test

Bud

A TLS terminator for superheroes.

What is bud?

Bud is a TLS terminating proxy, a babel fish decoding incoming TLS traffic and sending it in a plain text to your backend servers. Not only does it do this well, bud has a lot of useful features!

Install

Requirements

You must have gcc installed. Chances are that you do, but in case you don't:

# OSX 
# Command Line Tools for Xcode: xcode-select --install, 
# https://developer.apple.com/downloads, or Xcode 
 
# SmartOS 
[sudo] pkgin update
[sudo] pkgin install gcc47
 
# Ubuntu 
[sudo] apt-get update
[sudo] apt-get install build-essential

Easy Install

Bud can easily be installed using npm

[sudo] npm install -g bud-tls

This will install the command line tool bud. Optionally, you can build Bud from source with the steps below.

Build

Preparing:

git submodule update --init --recursive
Then:
git clone https://chromium.googlesource.com/external/gyp.git tools/gyp
OR
svn co http://gyp.googlecode.com/svn/trunk tools/gyp tools/gyp

Building:

./gyp_bud
make -C out/

The result will be located at: ./out/Release/bud.

Starting

To start bud - create a configuration file using this template and then:

bud --conf conf.json

Options

Usage: bud [options]

options:
  --version, -v              Print bud version
  --config PATH, -c PATH     Load JSON configuration
  --piped-config, -p         Load piped JSON configuration
  --default-config           Print default JSON config
  --daemon, -d               Daemonize process

Configuration

Bud uses JSON as the configuration format. Run bud --default-config to get the default configuration options (with comments and description below):

{
  // Number of workers to use, if 0 - only one process will be spawned.
  "workers": 1,
 
  // Timeout in ms after which workers will be restarted (if they die)
  "restart_timeout": 250,
 
  // Logging configuration
  "log": {
    // Minimum observable log level, possible values:
    // "debug", "notice", "info" (default), "warning", "fatal"
    "level": "info",
 
    // syslog facility to use, could be:
    // "auth", "cron", "kern", "lpr", "mail", "news", "syslog"
    // "deamon", "uucp", "local0", ... "local7"
    "facility": "user",
 
    // if true - logging will be printed to standard output
    "stdio": true,
 
    // if true - syslog will be used for logging
    "syslog": true
  },
 
  // Availability of the backend
  "availability": {
    // Maximum number of backend reconnects before giving up
    "max_retries": 5,
 
    // Time between retries
    "retry_interval": 250,
 
    // How long backend should not be responding until considered to be dead -- ms
    "death_timeout": 1000,
 
    // Timeout in ms after which it should be revived
    "revive_interval": 2500
  },
 
  // Frontend configuration (i.e. TLS/SSL server)
  "frontend": {
    "port": 1443,
    "host": "0.0.0.0",
 
    // tcp keepalive value (in seconds)
    "keepalive": 3600,
 
    // if true - server listed ciphers will be preferenced
    "server_preference": true,
 
    // Which protocol versions to support:
    // **optional**, default: "ssl23"
    // "ssl23" (implies tls1.*): "tls1", "tls1.1", "tls1.2"
    "security": "ssl23",
 
    // Path to default TLS certificate
    // NOTE: Could be an array of cert strings
    // e.g. ["-----BEGIN CERTIFICATE-----...", "-----BEGIN CERTIFICATE-----..."]
    "cert": "keys/cert.pem",
 
    // Path to default TLS private key
    // NOTE: Could be an array of keys as file paths or strings
    "key": "keys/key.pem",
 
    // **Optional** Passphrase for the private key
    // NOTE: Could be an array of passphrases
    "passphrase": null,
 
    // **Optional** Cipher suites to use
    // Bud defaults to:
    // "ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA256:ECDHE-RSA-AES256-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA256:DHE-RSA-AES256-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:AES256-GCM-SHA384:AES256-SHA256:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:DES-CBC3-SHA"
    "ciphers": null,
 
    // **Optional** ECDH Curve to use, defaults to `prime256v1
    "ecdh": "prime256v1",
 
    // **Optional** Path to DH parameters file
    // **Recommend** generate a file
    // openssl dhparam -out dh.key 3072
    "dh": null,
 
    // **Optional** Base64 encoded TLS session ticket key,
    // should decode into 48 raw bytes
    // **Recommend** Generate with:
    // node -pe "require('crypto').randomBytes(48).toString('base64')"
    "ticket_key": "yzNUDktR5KmA4wX9g9kDSzEn...true randomness",
 
    // **Optional** Ticket timeout in seconds, default: 300
    "ticket_timeout": 300,
 
    // **Optional** NPN protocols to advertise
    "npn": ["http/1.1", "http/1.0"],
 
    // NOTE: Better leave this default:
 
    // **Optional** Renegotiation window in seconds
    "reneg_window": 300,
 
    // **Optional** Maximum number of renegotiations in a window
    "reneg_limit": 3,
 
    // **Optional** Maximum size of TLS fragment
    "max_send_fragment": 1400,
 
    // **Optional** If false - close frontend connection on backend EOF
    "allow_half_open": false,
 
    // **Optional** If true - the clients will be requested to provide the cert
    "request_cert": true,
 
    // **Optional**: Either filename or array of PEM certificate chain that
    // should be used for validating client certs
    "ca": "filename"
    // "ca": [ "-----BEGIN CERTIFICATE----\n..." ]
  },
 
  // Balance tactic
  // **Optional** possible values: "roundrobin", "sni", or "on-fail"
  //
  // * "roundrobin" - on each new connection select next live backend
  // * "sni" - select backend list from either async sni or supplied contexts
  // * "on-fail" - select next backend in list only if the previous one is
  //   dead
  "balance": "roundrobin"
 
  // Unix-specific option, drop privileges after starting the process
  // **Recommend** Create a user and a group for bud.
  "user": null,
  "group": null,
 
  // Backend configuration (i.e. address of Cleartext server)
  "backend": [{
    "port": 8000,
    "host": "127.0.0.1",
    "keepalive": 3600,
 
    // if true - HAProxy compatible proxyline will be sent:
    // "PROXY TCP4 ... ... ... ..."
    // if "json":
    // 'BUD {"family":"TCP4","bud":{"host":"...","port":...},"peer":{...}'
    "proxyline": false,
 
    // if true:
    // - if NPN is enabled and either `spdy/3.1`, `spdy/3` or `spdy/2` is
    //   negotiated - custom `X_FORWARDED` frame will be sent on connection.
    //   see: https://groups.google.com/forum/#!topic/spdy-dev/XkdtuShtVCEadds
    //
    // - in all other cases `X-Forwarded-For: <address>` will be added right
    //   after the first line in the incoming data.
    //
    // - in order to avoid parsing each request, the `X-Forwarded-For` header
    //   will only be sent on the first client request.
 
    "x-forward": false,
 
    // *Optional key*
    // If this property is present - balancing will start from the backend,
    // which `external` value is matching server address.
    // (Useful when listening on multiple interfaces)
    "external": "[1.2.3.4]:443"
  }],
 
  // SNI context loading
  "sni": {
    "enabled": false,
    "port": 9000,
    "host": "127.0.0.1",
 
    // %s will be replaced with actual servername
    "query": "/bud/sni/%s"
  },
 
  // OCSP Stapling response loading
  "stapling": {
    "enabled": false,
    "port": 9000,
    "host": "127.0.0.1",
 
    // %s will be replaced with actual servername
    "query": "/bud/stapling/%s"
  },
 
  // Secure contexts (i.e. Server Name Indication support)
  "contexts": [{
    // Servername to match against
    "servername": "blog.indutny.com",
 
    // **Optional** balance algorithm, could not be `sni`
    "balance": "roundrobin",
 
    // Path to TLS certificate
    // Could be an array
    "cert": "keys/cert.pem",
 
    // Path to TLS private key
    // Could be an array
    "key": "keys/key.pem",
 
    // **Optional** Passphrase for the private key
    // Could be an array
    "passphrase": null,
 
    // Cipherlist to use (overrides frontend.ciphers, if not null)
    "ciphers": null,
 
    // ECDH curve to use, overrides frontend.ecdh
    "ecdh": null,
 
    // **Optional** Path to DH parameters file, overrides frontend.dh
    "dh": null,
 
    // TLS session ticket key to use, overrides frontend.ticket_key
    "ticket_key": null,
 
    // NPN protocols to advertise
    // **optional** (overrides frontend.npn, if not null)
    "npn": ["http/1.1", "http/1.0"],
 
    // Backends to use, works only when "balance" is set to "sni"
    "backend": [{
      "port": 8000,
      "host": "127.0.0.1",
      "keepalive": 3600
    }],
 
    // **Optional** If true - the clients will be requested to provide the cert
    "request_cert": true,
 
    // **Optional**: Either filename or array of PEM certificate chain that
    // should be used for validating client certs
    "ca": "filename"
    // "ca": [ "-----BEGIN CERTIFICATE----\n..." ]
  }]
}

To start bud - create a configuration file using this template:

bud --conf conf.json

To reload config - send SIGHUP to the bud's master process (or worker, if you wish to reload configuration only in a single process):

kill -SIGHUP <bud-master's-pid>

X-Forwarded-For

Setting backend.*.x-forward will cause an X-Forwarded-For header to be injected into the first request seen on a socket. However, subsequent requests using the same socket (via Keep-Alive), will not receive this header from bud. To remedy this, you should associate this header with the underlying socket or connection, and not expect it to be present with every HTTP request. A possible implementation in Node.JS would look like:

var http = require('http')
http.createServer(onrequest).listen(8080, 'localhost')
 
function onrequest(req, res) {
  // this is a previous SSL request
  if (req.connection.xForward)
    req.headers['x-forwarded-for'] = req.connection.xForward;
  // this is a new SSL request
  else if (req.headers['x-forwarded-for'])
    req.connection.xForward = req.headers['x-forwarded-for'];
  // this is not an SSL request
  else {
    // optional, but a way to force SSL
    res.writeHead(301, {
      'Location': 'https://localhost:1443'
    })
    return void res.end()
  }
 
 
  // optional, it's a good idea to send this header to
  // force SSL in modern browsers
  res.setHeader('Strict-Transport-Security', 'max-age=' + 60 * 60 * 24 * 365)
 
  // handle request normally now knowing that the
  // `X-Forwarded-For` header is present
}

SNI Storage

If you have enabled SNI lookup (sni.enabled set to true), on every TLS connection a request to the HTTP server will be made (using sni.host, sni.port and sni.query as url template). The response should be a JSON of the following form:

{
  "cert": "certificate contents",
  "key": "key contents",
 
  // Optional
  "npn": [],
 
  // Optional
  "ciphers": "...",
 
  // Optional
  "ecdh": "..."
 
  // **Optional** Path to DH parameters file, overrides frontend.dh
  "dh": null
}

Or any other JSON and a 404 status code, if SNI certificate is not found.

If optional fields are not present - their value would be taken from frontend object in configuration file.

OCSP Stapling

OCSP Stapling has exactly the same configuration options as SNI Storage. Main difference is that 2 requests to OCSP Stapling server could be made by bud:

1. GET /stapling_url/<stapling_id> - to probe backend's cache
2. POST /stapling_url/<stapling_id> with JSON body: {"url":"http://some.ocsp.server.com/","ocsp":"base64-encoded-data"}.

For the first request, if backend has cached OCSP response for given <stapling_id>, backend should respond with following JSON:

{"response":"base64-encoded-response"}

Or with a 404 status code and any other JSON.

For the second request, backend should send a POST request to the OCSP server given in the JSON body. This request should have Content-Type header set to application/ocsp-request and a decoded (from base64) ocsp field from body.

The response to bud should be the same as in the first case, base64-encoded data received from OCSP server.

Backend Example

Example OCSP+SNI backend implementation in node.js could be found here.

Generating a key and getting an ssl cert

Generating a key is easy with openssl

openssl genrsa -out server.key 2048

To generate the public certs, you'll need to buy an SSL cert from the provider of your choice. They'll ask you to upload your key file, and the .crt file generated below:

# you'll be asked for a bunch of info. The most important one is "common name" 
# and this must match your domain exactly. e.g. 
# example.com 
# if you've bought a wildcard cert, you should use 
# *.example.com 
openssl req -new -key server.key -out server.csr
openssl x509 -req -days 9999 -in server.csr -signkey server.key -out server.crt

You'll need to upload the .crt and .key files to the cert provider. What you want back from them is a .pem file that has their entire cert chain. Then in your bud config set it like this:

{
  "frontent": {
    // you generated this in the first step
    "key": "server.key",
    // this is the file you downloaded from your cert provider
    "cert": "server.pem"
  }
}

Running as monitored process

Keep bud running even after a server restart

SmartOS

touch bud.xml
read -d '' budconfig << EOF
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
<!--
        Created by Manifold
--><service_bundle type="manifest" name="bud">
 
    <service name="bud" type="service" version="1">
 
        <create_default_instance enabled="true"/>
 
        <single_instance/>
 
        <dependency name="network" grouping="require_all" restart_on="error" type="service">
            <service_fmri value="svc:/milestone/network:default"/>
        </dependency>
 
        <dependency name="filesystem" grouping="require_all" restart_on="error" type="service">
            <service_fmri value="svc:/system/filesystem/local"/>
        </dependency>
 
        <exec_method type="method" name="start" exec="/opt/local/bin/bud -c %{config_file} -d" timeout_seconds="5"/>
 
        <exec_method type="method" name="stop" exec=":kill" timeout_seconds="60"/>
 
        <property_group name="startd" type="framework">
 
            <propval name="duration" type="astring" value="contract"/>
            <propval name="ignore_error" type="astring" value="core,signal"/>
        </property_group>
 
 
        <property_group name="application" type="application">
            <!-- TODO: customize this path to your bud config -->
            <propval name="config_file" type="astring" value="/root/bud/bud.json"/>
        </property_group>
 
 
        <stability value="Evolving"/>
 
        <template>
            <common_name>
                <loctext xml:lang="C">
                    bud-tls
                </loctext>
            </common_name>
        </template>
 
    </service>
 
</service_bundle>
EOF
echo $budconfig > bud.xml
svccfg import bud.xml
svcadm enable bud
# should be in the online state 
svcs -l bud
# see the logs for details 
tail /var/svc/log/bud\:default.log

Ubuntu

A docker image is avaliable

Community

Join #bud-tls on freenode IRC to discuss things with me or others!

LICENSE

This software is licensed under the MIT License.

Copyright Fedor Indutny, 2013.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.