@krystofcelba/homebridge-wiz-lan

homebridge-wiz-lan

Based off of kpsuperplane/homebridge-iotas

Currently supports

• Lightbulbs (RGB, Color Temp, and Single Color) (tested with Wiz 100W Color & Wiz 30W Filaments)

Installation

1. Install homebridge using: npm install -g homebridge
2. Install this plugin using: npm install -g homebridge-wiz-lan
3. Update your configuration file. See the sample below.

Configuration

Simple Configuration:

{
    "platform": "WizSmarthome",
    "name": "WizSmarthome",
}

Full configuration options:

{
    "platform": "WizSmarthome",
    "name": "Wiz",

    // [Optional] Port for bulbs to connect to your server
    // Default: 38900
    "port": 38900,

    // [Optional] UDP Broadcast address for bulb discovery
    // Default: 255.255.255.255
    "broadcast": "255.255.255.255",

    // [Optional] Your server's IP address
    // Default: Autodiscovered
    "address": "192.168.0.1",

    // [Optional] Manual list of IP addresses of bulbs
    // Useful if UDP broadcast doesn't work for some reason
    // Default: None
    "devices": [
      { "host": "192.168.0.2" },
      { "host": "192.168.0.3" },
      { "host": "192.168.0.4" },
      // ...
    ]
  }

Some Notes

Color

The Wiz bulbs strongly distinguish between RGB color modes and Kelvin color modes, the latter being significantly brighter. Unfortunately, HomeKit is not very good at handling both at the same time, yielding weird errors if you try to add both characteristics.

Luckily, even if we only enable the color mode, we still get a nice temperature picker. Problem is, the color temperature is given in standard HSV. As such, this app will try to guess which one to best use given a color, and you will notice some significant brightness variance switching between a "temp" hue and a "color" hue.

In particular, since the Wiz bulbs only support up to 6500K, this means that only the top-ish half of the temperature picker is actually bright

Development

Ideas from http://blog.dammitly.net/2019/10/cheap-hackable-wifi-light-bulbs-or-iot.html?m=1

Contributing

Mostly built for my own personal use, I'll probably reply to any created issues but probably will not actively support anything outside of the RGB bulbs. If you'd like to make a PR through, <3

Furthermore, feel free to create and modify it on your own per MIT License.

How bulbs are discovered

Make a UDP broadcast to port 38899 with the following content:

{"method":"registration","params":{"phoneMac":"<my_mac_address>","register":false,"phoneIp":"<my_ip_address>"}}

You will get a response on port 38900 with the following content:

{"method":"registration","env":"pro","result":{"mac":"<light_address>","success":true}}

License

See LICENSE file