@jbuhacoff/manifest

nodejs-manifest-util

A tool for people who work with many repositories. One manifest to rule them all.

Checkout specific tags, branches, or commits from multiple repositories into locations specified in a manifest file. Create and merge branches in a set of repositories with one command.

The manifest tool is written in JavaScript and packaged with npm.

Why use manifest? You might be interested in this tool if:

• your code is in multiple repositories
• it's tedious to create, merge, and delete branches in each repository
• you want to easily identify related work across multiple repositories
• you need an easier way to share the list of repositories and which branch to check out in each one
• sometimes you work with a subset of repositories

Maybe you've been posting a list of repositories somewhere manually and it's tedious to maintain or keeps getting outdated because it's not being maintained. There's a manifest tool for that :)

*** IMPORTANT NOTE ***

This code is still under development and is not yet suitable for regular use.

Pre-requisites

• NodeJS
• NPM

Installation

npm install -g @jbuhacoff/manifest

Getting started

You just started working on a project and you need to clone all the relevant repositories and checkout the code in each repository that corresponds to the current development branch.

Create a workspace directory. For example:

mkdir workspace && cd workspace

In scripts below we will refer to this directory as the workspace directory, and it can be anywhere that is convenient for you in your filesystem. All manifest commands should be executed from this directory and will only operate on repositories under that directory.

See usage information:

manifest --help
manifest --help <command>

Command

Add

The repository must already be checked out and stored in the workspace. This command will add it to the manifest in its current state.

manifest add <path relative to workspace>

Command behavior:

Edits the current manifest to add the repository path relative to the workspace, and the current tag, branch, or commit id. If there is a tag pointing to the current commit id, it will be used. Otherwise the current branch will be used. Otherwise the current commit id will be used. If the repository is already configured to pull from a remote url, the url is added to the manifest. If the repository has multiple remotes, and one of them is named 'origin', that remote is used automatically as the repository url. If it has multiple remotes, and none of them are named origin, a warning is emitted.

Branch

manifest branch <name> [--create]

Command behavior:

Create a new manifest <name>.

Create a branch named <name> in each repository listed in the current manifest.

If <name> starts with +, prepends current ref (branch name or commit) to create a branch name like {current}+{name}. For example, if repository A is on branch v1.0+next, and if repository B is on branch master, and the name specified in the command is +feature#1234-short-title the branch name in A will be v1.0+next+feature#1234-short-title, while the branch name in B will be master+feature#1234-short-title.

If the --create option is specified, a new manifest file will also be created with the same <name> and it will store the same list of repositories but with the new branch name for each one. If <name> starts with +, the new manifest name will also be prepended with the current manifest name.

Checkout

manifest checkout <ref>

Command behavior:

When you are switching from working on feature 1 to feature 2, this command will checkout all the repositories to the tag, branch, or commit id that is needed for feature 2. If you have any unsaved work in feature 1 it will be automatically stashed.

Git doesn't allow checking out a tag directly -- you have to create a branch because the tag is not editable. The tool automatically creates a branch named {tag}+next. If the repository is configured to point to a specific commit in the manifest, a new branch will automatically be created {commit}+next.

Create

To capture the current state of all the repositories in the workspace, use this command.

manifest create <ref>

The file .manifest/ref/<ref>.yaml must not already exist.

Command behavior:

Creates .manifest/ref/<ref>.yaml to add the repository path relative to the workspace and the current tag, branch, or commit id. If there is a tag pointing to the current commit id, it will be used. Otherwise the current branch will be used. Otherwise the current commit id will be used.

Warns if .manifest/ref/<ref>.yaml is missing a remote definition for any repository.

Immediately commits and pushes the manifest repository so the change is visible to others. This prevents naming conflicts by reserving the name <ref>.

Delete

To delete an existing manifest, use this command.

manifest delete <ref>

The file .manifest/ref/<ref>.yaml must exist to be deleted.

Command behavior:

Emits an error message and exits with non-zero code if <ref> does not exist.

Deletes the specified manifest. Does not affect any repositories.

Immediately commits and pushes the manifest repository so the change is visible to others. This prevents others from starting new work based on <ref> and also frees up the <ref> name to be reused.

Exec

This command executes a specified command in each repository listed in the manifest.

manifest exec git commit -m <message>

This would execute the command git commit -m <message> in each repository listed in the manifest. It might be appropriate for housekeeping tasks like doing a similar fix in each repository.

manifest exec git pull

This would execute the command git pull in each repository listed in the manifest.

Init

manifest init .
manifest init <url>

Command behavior:

The command manifest init . will initialize the manifest using the content of the current directory. Note that you cannot use any other directory path instead of . because the manifest is created in your workspace which is assumed to be the current directory, and all repositories are required to be at a path relative to the workspace. This makes the manifest reusable by many people who may clone the entire workspace into any directory they want.

All the repositories specified by the manifest file at <url> will be cloned into the current directory, which is the workspace directory $WORKSPACE_PATH. If any repository is unreachable an error will be emitted.

Merge

manifest merge <ref>

Command behavior:

For each repository in the manifest, attempt to merge the tag, branch, or commit id for this repository in the specified <ref> into the current branch. If merge is not successful, store the git output in a file in each repository so it can be inspected, and emit an error message.

NOTE: you should first run manifest status to make sure all repositories are ready for a merge with no untracked changes.

NOTE: if the specified <ref> manifest has repositories that the current one doesn't, those will be added automatically if possible.

Status

manifest status

Command behavior:

For each repository in the manifest, check if there are any uncommitted changes in that repository.

The status report is in Markdown format:

---
title: Manifest status report for: {manifest}
---

# path/to/repo1

<info>

# path/to/repo2

<info>

Procedure

Creating a workspace

A workspace is just a directory where you will have a manifest and repositories.

You could create multiple workspaces, such as ~/project1 and ~/project2 so that you can have multiple copies of repositories checked out to different branches concurrently. If your IDE has a workspaces feature, this makes it convenient to close all repositories from one workspace and open all repositories from another workspace with one command.

Initialize a workspace

To get a copy of all the relevant repositories and checkout the appropriate branch in each one according to a prefdefined repository set, you only need one command:

manifest init $MANIFEST_URL

To initialize a workspace using repositories already checked out:

manifest init .

Note that the . is a special case. You cannot use a path to any other directory here.

Preparing to initialize a workspace

Someone needs to post a file at a URL for the manifest init command to download.

That file needs to mention each repository to checkout and the URL for that repository. It's convenient to keep this file also as part of a source repository, so it can be maintained and shared easily.

Adding a repository

The repository must already be checked out and stored in the workspace. This command will add it to the manifest in its current state.

manifest add <path relative to workspace> [--ref <ref>]

Creating a feature branch

To start working on a new feature, you need to create a corresponding branch in each repository. Without the manifest tool, it could be tedious to do that and you'd try to limit the effort to only repositories where you're about to edit files, and the name of the branch in some repositories might be inconsistent with the others. Using the manifest tool, the branch is created in every repository and when you share with others they will get the same view. When it's time to clean up the feature (merge into main development branch and delete it) this is also automatic across all repositories in the manifest. Repositories that were not edited will not have any merge issues and the feature branch will be easily deleted when it's time to cleanup.

manifest create <ref>
manifest branch <name>

For example:

manifest create feature#1234
manifest branch feature#1234-short-title

To name the feature branch using a {current}+{branch} convention in each repository, use a + at the start of the branch name like this:

manifest branch +feature#1234-short-title

For example, if repository A is on branch master and repository B is on branch v1.0+next, the command manifest branch +feature#123 will create branch master+feature#123 in repository A and branch v1.0+next+feature#123 in repository B.

Updating repositories

To keep your branches up to date with remote changes, you could run git pull in each repository like this:

manifest exec git pull

Commiting changes to repositories

The manifest tool does not commit changes for you. The changes in each repository may be of different nature and scope. It does provide a way to automate making a similar commit in each repository via the exec command, which should be used very carefully:

manifest exec git commit -m <message>

This would execute the command git commit -m <message> in each repository listed in the manifest. It might be appropriate for housekeeping tasks like doing a similar fix in each repository.

Using local repositories

If you are using source control with a project that is not yet shared anywhere, you can define repositories in src and skip the io definitions. Commands that interact with remote servers will either not work or emit warnings that io definitions are missing.

Synchronizing manifests

It's recommended to keep the manifest repository itself always on the master branch so it can be used for immediate sharing of newly created or deleted manifest names with the team.

Design

Manifest files

A workspace can have multiple manifest files to allow easy transitions from one set of repositories with their branches to another set.

Each manifest file is stored at .manifest/ref/{name}.yaml

Current manifest

A special file named current points the manifest tool at the current manifest for the workspace.

The name of the current manifest is stored in the file .manifest/current. If the variable {current} is the content of that file, then it corresponds to a manifest file stored at .manifest/ref/{current}.yaml.