nx-observe

This library is part of the NX framework.

The purpose of this library is to allow powerful data observation/binding without any special syntax. It uses ES6 Proxies internally to create seamless data binding with a minimal interface. A more detailed blog post about this library can be found here.

Installation

$ npm install @risingstack/nx-observe

Platform support

Node: 6 and above
Chrome: 49 and above (after browserified)
Firefox: 38 and above (after browserified)
Safari: 10 and above (after browserified)
Edge: 12 and above (after browserified)
Opera: 36 and above (after browserified)
IE is not supported

Usage

const observer = require('@risingstack/nx-observe')

API

observer.observable([Object])

This method creates and returns an observable object. If an object is passed as argument it wraps the passed object in an observable.

const observable = observer.observable({prop: 'someValue'})

const signal = observer.observe(function, [context], ...[args])

This method observes a function. An observed function automatically reruns when a property of an observable, which is used by the function changes (or is deleted). The function doesn't run immediately on property change, instead it runs after a small delay (when the current stack empties). Multiple synchronous changes won't cause the function to run multiple times. Changes that result in no value change (state.prop = state.prop) won't cause the function to run either. The function can observe any synchronous javascript code (nested data, iterations, function calls, getters/setters, etc.)

observe() returns a signal, which can later be used to stop the observation. This is similar to the const signal = setTimeout(), clearTimeout(signal) pair.

const signal = observer.observe(() => console.log(observable.prop))

A this context and a list of argument can be passed after the observed function as arguments. In this case the observed function will always be called with the passed this context and arguments.

observer.observe(printSum, context, arg1, arg2)

function printSum (arg1, arg2) {
  console.log(arg1 + arg2)
}

const signal = observer.queue(function, [context], ...[args])

This method queues a function to be executed together with the currently triggered observed functions. queue() returns a signal, which can later be used to remove the function from the queue.

const signal = observer.queue(() => console.log(observable.prop))

A this context and a list of argument can be passed after the queued function as arguments. In this case the queued function will be called with the passed this context and arguments.

observer.queue(printSum, context, arg1, arg2)

function printSum (arg1, arg2) {
  console.log(arg1 + arg2)
}

observer.unobserve(signal)

If unobserves the observed or queued function associated with the assed signal. Unobserved functions won't be rerun by observable changes anymore.

const signal = observer.observe(() => console.log(observable.prop))
observer.unobserve(signal)

observer.isObservable(Object)

Returns true if the passed object is an observable, otherwise returns false.

const observable = observer.observable()
const isObservable = observer.isObservable(observable)

Example

const observer = require('@risingstack/nx-observe')

// creating two observable objects
const observable1 = observer.observable({num: 0})
const observable2 = observer.observable({num: 0})

// outputs 0 to the console after the stack empties
// the arguments are: observer func, observer func 'this' context, observer func arguments
const signal = observer.observe(printSum, undefined, observable1, observable2)

function printSum (obj1, obj2) {
  console.log(obj1.num + obj2.num)
}

// outputs 2 to the console
setTimeout(() => observable1.num = 2, 100)

// outputs 7 to the console
setTimeout(() => observable2.num = 5, 200)

// finish observing
setTimeout(() => observer.unobserve(signal), 300)

// observation is finished, doesn't trigger printSum, outputs nothing to the console
setTimeout(() => observable1.num = 6, 400)

Features and edge cases

observable argument cases

If an observable is passed as argument to the observer.observable method, it simply returns the passed observable. If you pass the same object into different observer.observable calls, it always returns the same observable instance.

const observer = require('@risingstack/nx-observe')

const obj = {prop: 'value'}
const observable1 = observer.observable(obj)
const observable2 = observer.observable(obj)
const observable3 = observer.observable(observable1)

// these output 'true' to the console
console.log(observable1 === observable2)
console.log(observable2 === observable3)

when does the observed function run

And observer runs after every stack in which the observable properties used by it changes value. An observer runs maximum once per stack. Multiple synchronous changes of the observable properties won't trigger it more than once. Setting on observable property without a value change won't trigger it either.

const observer = require('@risingstack/nx-observe')

const observable = observer.observable({prop: 'value'})

// outputs 'value' to the console after the stack empties
observer.observe(() => console.log(observable.prop))

// causes only 1 rerun, outputs 'newer value' to the console
setTimeout(() => {
  observable.prop = 'new value'
  observable.prop = 'newer value'
})

// causes no rerun (the value did not change), doesn't trigger console.log
setTimeout(() => observable.prop = 'newer value', 100)

observing expando properties

Expando (dynamically added) properties can be observed without any special syntax.

const observer = require('@risingstack/nx-observe')

const observable = observer.observable()

// outputs 'undefined' to the console after the current stack empties
observer.observe(() => console.log(observable.expando))

// outputs 'dynamically added prop' to the console
setTimeout(() => observable.expando = 'dynamically added prop', 100)

observing conditionals

Any synchronous JavaScript code can be observed. This includes code 'hidden behind' conditionals or loops.

const observer = require('@risingstack/nx-observe')

const observable = observer.observable({
  condition: true,
  prop1: 'prop1',
  prop2: 'hidden'
})

// outputs 'prop1' to the console after the current stack empties
observer.observe(() => console.log(observable.condition ? observable.prop1 : observable.prop2))

// outputs 'hidden' to the console
setTimeout(() => observable.condition = false, 100)

// outputs 'but tracked' to the console
setTimeout(() => observable.prop2 = 'but tracked', 200)

observing nested properties

Observing nested properties works with arbitrary depth.

const observer = require('@risingstack/nx-observe')

const observable = observer.observable({prop: {nested: 'nestedValue'}})

// outputs 'nestedValue' to the console after the current stack empties
observer.observe(() => console.log(observable.prop.nested))

// outputs 'otherValue' to the console
setTimeout(() => observable.prop.nested = 'otherValue', 100)

observing implicit properties

The library also observes implicit properties. Implicit properties are not directly used by your code, but by native function implementations for example.

const observer = require('@risingstack/nx-observe')

const observable = observer.observable({words: ['Hello', 'World']})

// outputs 'Hello World' to the console after the current stack empties
observer.observe(() => console.log(observable.words.join(' ')))

// outputs 'Hello World !' to the console
setTimeout(() => observable.words.push('!'), 100)

// outputs 'Hello There !' to the console
setTimeout(() => observable.words.splice(1, 1, 'There'), 200)

observing inherited properties

You can use prototypal inheritance with observables. The library walks and observes the prototype chain correctly.

const observer = require('@risingstack/nx-observe')

const parentObservable = observer.observable({greeting: 'Hello'})
const observable = observer.observable({subject: 'World!'})

Object.setPrototypeOf(observable, parentObservable)

// outputs 'Hello World' to the console after the current stack empties
observer.observe(() => console.log(observable.greeting + ' ' + observable.subject))

// outputs 'Hello There!' to the console
setTimeout(() => observable.subject = 'There!')

// outputs 'Hey There!' to the console
setTimeout(() => parentObservable.greeting = 'Hey', 100)

// outputs 'Look There!' to the console
setTimeout(() => observable.greeting = 'Look', 200)

// outputs 'Hey There!' to the console
setTimeout(() => delete observable.greeting, 300)

observing getters/setters

Computed getters/setter properties of observables will be correctly observed by observer functions.

const observer = require('@risingstack/nx-observe')

const observable = observer.observable({
  num1: 0,
  num2: 0,
  get sum () { return this.num1 + this.num2 },
  set sum (value) {
    this.num1 = value / 2
    this.num2 = value / 2
  }
})

// outputs 0  to the console after the current stack empties
observer.observe(() => console.log(observable.sum))

// outputs 1 to the console
setTimeout(() => observable.num1 = 1)

// outputs 4 to the console
setTimeout(() => observable.num2 = 3, 100)

// changes num1 and num2 to 3, outputs 6 the console
setTimeout(() => observable.sum = 6, 200)

two way binding

Every observed function is guaranteed to run maximum once per stack. Asynchronous infinite loops are also handled and avoided by the library.

const observer = require('@risingstack/nx-observe')

const observable1 = observer.observable({prop: 'value1'})
const observable2 = observer.observable({prop: 'value2'})

observer.observe(() => observable1.prop = observable2.prop)
observer.observe(() => observable2.prop = observable1.prop)

setTimeout(() => observable1.prop = 'Hello')
// outputs 'Hello' to the console
setTimeout(() => console.log(observable2.prop), 100)

setTimeout(() => observable2.prop = 'World', 200)
// outputs 'World' to the console
setTimeout(() => console.log(observable1.prop), 300)

selective observation

Sometimes you might want a certain set operation to not trigger observers, or a certain observable property to not be observed by the observer function. In this case you should use observable.$raw, which is the exposed raw (unwrapped) object behind the observable. This object will not cause any observers to be triggered or registered.

const observer = require('@risingstack/nx-observe')

const person = observer.observable({
  name: 'John',
  age: 25
})

// outputs 'name: John, age: 25' to the console after the current stack empties
observer.observe(() => console.log(`name: ${person.name}, age: ${person.$raw.age}`))

// will not cause a rerun, since the observer only uses person.$raw.age
// outputs nothing to the console
setTimeout(() => person.age = 30)

// outputs 'name: Bill, age: 30' to the console
setTimeout(() => person.name = 'Bill', 100)

// will not cause a rerun, since it only modifies person.$raw
// outputs nothing to the console
setTimeout(() => person.$raw.name = 'Anne', 200)

Performance

This benchmark compares vanilla JS, MobX and nx-observer in a few scenarios. You can set it up locally with the npm run build-benchmark-mac or npm run build-benchmark-ubuntu command (depending on your OS) and run it with npm run benchmark. The result on a MacBook Pro with Node 6.2.0 can be seen below.

The first two tests compare NX and MobX observable creation cost with plain JS object creation. In case of MobX the overhead grows with the number of properties.
'Dynamic property addition' tests the cost of adding expando properties to a plain object or an observable without any observer/listener function registered for the observable. MobX requires the special mobx.extendObservable(obj, { prop: 'value' }) syntax instead of obj.prop = 'value'.
'Get and set operation' test the cost of get/set operations of a plain object or an observable without any observer/listener function registered for the observable.
'Function creation' tests the cost of vanilla JS function creation versus mobx.autorun(newFn) and nx.observe(newFn).
'Function trigger' tests the cost of registering observable property mutations and running appropriate observer/listener functions.
'Function cleanup' tests the cost of disposing observer/listener functions with disposeFn() or nx.unobserve(fn).

Do not worry about the large difference between the vanilla and nx-observe / MobX results. The operations tested above are some of the fastest ones in vanilla JS. The overhead would be a lot smaller compared to some commonly used built in objects, like Promises.

Contributions

This library has the very specific purpose of supporting the NX framework. Features should only be added, if they are used by the framework. Otherwise please fork.

Bug fixes, tests, benchmark corrections and doc updates are always welcome. Tests and linter (standardJS) must pass.

Authors

Miklos Bertalan

License

MIT

@risingstack/nx-observe

nx-observe

Installation

Platform support

Usage

API

observer.observable([Object])

const signal = observer.observe(function, [context], ...[args])

const signal = observer.queue(function, [context], ...[args])

observer.unobserve(signal)

observer.isObservable(Object)

Example

Features and edge cases

observable argument cases

when does the observed function run

observing expando properties

observing conditionals

observing nested properties

observing implicit properties

observing inherited properties

observing getters/setters

two way binding

selective observation

Performance

Contributions

Authors

License

Readme

Keywords

Package Sidebar

Install

Repository

Homepage

Weekly Downloads

Version

License

Last publish

Collaborators

@risingstack/nx-observe

nx-observe

Installation

Platform support

Usage

API

observer.observable([Object])

const signal = observer.observe(function, [context], ...[args])

const signal = observer.queue(function, [context], ...[args])

observer.unobserve(signal)

observer.isObservable(Object)

Example

Features and edge cases

observable argument cases

when does the observed function run

observing expando properties

observing conditionals

observing nested properties

observing implicit properties

observing inherited properties

observing getters/setters

two way binding

selective observation

Performance

Contributions

Authors

License

Readme

Keywords

Package Sidebar

Install

Repository

Homepage

DownloadsWeekly Downloads

Version

License

Last publish

Collaborators

Weekly Downloads