wot-testbench

Web of Things Test Bench

Tests a WoT Thing by executing interactions automatically, based on its Thing Description.

A Thing Description should represent capabilities of a device. This implies that if a device support the interactions that a client can execute based on the device's TD, it doesn't comply to its own TD. Test bench tests whether:

• Every interaction written in the TD can be executed
• Writable properties are indeed writable
• Each interaction returns the described data type (DataSchema of TD Spec)

---

Installation

Prerequisites:

• Node.js: sudo apt-get install -y nodejs (currently version 20 is not supported)
• Typescript: npm install -g typescript
• ts-node: npm install -g ts-node

Steps

1. Clone testbench from its repository by git clone [e-mail]:tum-esi/testbench.git
2. Switch into testbench folder
3. Execute the npm install. This will install every required library, including node-wot
4. Execute npm run-script build

Example Usage

Quick Method with Default Configuration

0. Start a servient that has a TD so that TestBench can interact with it.

   1. testing-files/faultyThing.ts shows an example test servient with ONLY BAD implementations. Run faultyThing.ts by executing ts-node testing-files/faultyThing.ts inside testbench directory.
   2. testing-files/perfectThing.ts shows an example test servient with ONLY GOOD implementations. Run perfectThing.ts by executing ts-node testing-files/perfectThing.ts inside testbench directory.

1. Run with: npm start

2. Interact with the testbench using REST clients such as cURL, Postman etc.

   1. Test a servient by sending its TD

POST	Test Thing with given TD
content-type	application/json
body	Thing Description
data-type	raw
url	http://your-address:8980/wot-test-bench/actions/fastTest
return value	JSON Array with results

TestBench is a WoT Thing itself with a TD, so you can interact with it like you interact with other WoT servients.

Postman:

PUT	TestBench config update
content-type	application/json
body	config json data
data-type	raw
url	http://your-address:8980/wot-test-bench/properties/testConfig

cURL:

curl -X POST -H "Content-Type: application/json" -d '{configuration-data}' http://your-address:8980/wot-test-bench/properties/testConfig

IMPORTANT: fastTest does two things:

1. calls testThing and sets result of this action to the value of conformance key in the testReport.
2. calls testVulnerabilities and sets result of this action to the value of vulnerabilities key in the testReport.

---

Method with all Customization Options

Testing for Conformance

In conformance test, the TestBench sends valid requests to the Thing, and validates responses, via testThing action.

1. Start a servient that has a TD so that TestBench can interact with it.

   1. testing-files/faultyThing.ts shows an example test servient with ONLY BAD implementations. Run faultyThing.ts by executing ts-node testing-files/faultyThing.ts inside testbench directory.
   2. testing-files/perfectThing.ts shows an example test servient with ONLY GOOD implementations. Run perfectThing.ts by executing ts-node testing-files/perfectThing.ts inside testbench directory.

2. Run the TestBench by executing npm start.

   1. Before doing so, you can configure the test bench by changing the defaultConfig inside defaults.ts file.

3. Start Postman software: Postman

4. Send the TD of the Thing you want to test by writing into the thingUnderTestTD property

   1. faultyThing.ts creates a TD for itself after it has run. Run curl http://localhost:8083/faulty-thing-servient to get TD. Warning!: Ports might cause an error, so either make sure port numbers inside the faultyThing.ts file are available or change them.

PUT	TestBench update TuT Property
content-type	application/json
body	Thing Description
data-type	raw
url	http://your-address:8980/wot-test-bench/properties/thingUnderTestTD
return value:	no return value

5. (Optional) Update the test configuration by writing to the testConfig property.
   1. This is not optional if you have to add security configuration. You should resend the test configuration with the credentials filled according to the Thing you want to test, like in the following example:

    "credentials": {
        THING_ID1: {
            "token": TOKEN
        },
        THING_ID2: {
            "username": USERNAME,
            "password": PASSWORD
        }
    }

6. Call initialization sequence of the TestBench by invoking the initiate action. This is where TestBench reads new configurations, consumes the provided TD of Thing under Test and exposes generated testData which is sent during testing procedure as a property of TestBench. Input data "true" activates logging to console which can show detailed error logs.

POST	TestBench initiation
content-type	application/json
body	boolean
data-type	raw
url	http://your-address:8980/wot-test-bench/actions/initiate
return value:	boolean if successful

7. (Optional) Change the data that will be sent to the Thing under Test by writing to the testData property.

PUT	TestBench change request data
content-type	application/json
body	[[{"interactionName":"testObject","interactionValue":{"brightness":50,"status":"my change"}},{"interactionName":"testObject","interactionValue":{"brightness":41.447134566914734,"status":"ut aut"}}],[{"interactionName":"testArray","interactionValue":[87987366.27759776,18277015.91254884,-25996637.898988828,-31082548.946999773]},{"interactionName":"testArray","interactionValue":[2907339.2741234154,-24383724.353494212]}],[{"interactionName":"display","interactionValue":"eu ad laborum"}, ... ], ... ]
data-type	raw
url	http://your-address:8980/wot-test-bench/actions/updateRequests
return value:	no return value

8. Test the configured Thing by invoking testThing action. Test bench reads the testData property and executes testing procedure on consumed Thing. Then, it exposes a test report. Body set to "true" activates logging to console.

POST	TestBench execute action testThing
content-type	application/json
body	"true"
data-type	raw
url	http://your-address:8980/wot-test-bench/actions/testThing
return value:	boolean if successful

9. Read the test report by reading the testReport property.

---

Testing for Coverage

The action, testAllLevels, tests for different levels of coverage. Levels include Operation, Parameter, Input and Output.

1. Test a servient for all coverage levels by sending its TD

POST	Test Thing with given TD
content-type	application/json
body	Thing Description
data-type	raw
url	http://your-address:8980/wot-test-bench/actions/testAllLevels
return value	JSON Array with results

---

Testing for Vulnerabilities

The action, testVulnerabilities, tests for vulnerabilities, both from security and safety perspectives.

The main motivation behind this action is to cover the security of the Thing. From pre-determined sets of usernames and passwords, this action involves performing penetration testing with dictionary attacks. It also performs some common safety tests similar to those done under testThing.

Perform steps 1 - 6 as described above, then send a POST request with a body containing true or false (indicating whether to perform a relatively faster and less covering test or not, true: a small subset of all combinations, false: all combinations) to http://your-address:8980/wot-test-bench/actions/testVulnerabilities. Read the test report by sending a GET request to http://your-address:8980/wot-test-bench/properties/testReport.

Structure of the Vulnerability Report

Mainly consists of two parts: propertyReports containing reports of properties, and actionReports containing those of actions.

Each one of these reports consists of:

1. propertyName / actionName to distinguish from other properties/actions.

2. security, which contains

   • passedDictionaryAttack indicating whether the credentials needed to access this property/action (directly or indirectly) are found in the pre-determined username-password combinations. true unless a suitable pair of credentials are found by dictionary attack.

   • description, used for human readability purposes.

   • optional id and pw: these two contains the username and password if passedDictionaryAttack is false.

3. safety, which contains

   • (if property report) isReadable indicating whether this property can be read. Must be compared with the property in the TD. In an non-erroneous case, they should match. e.g. for a writeOnly property this should be false.

   • (if property report) isWritable indicating whether this property can be written. Must be compared with the property in the TD. In an non-erroneous case, they should match. e.g. for a readOnly property this should be false.

   • exceptionTypes indicating the types that should not be optimally accepted. If not empty, then those types are accepted by the property/action, you should check for those exception types in your implementation.

Notes

• ALWAYS call initiate after writing thingUnderTestTD if you are going to perform testThing or testVulnerabilities only.

• Depending on where the Thing is hosted and number of InteractionAffordances, this test may take quite some time.

• Currently only supports HTTP/HTTPs.

• Currently only supports basic and oauth2 with client_credentials flow.

• Dictionary attacks are performed on the Thing in case of basic security scheme, and on the token server in case of oauth2.

• In this README, the phrase types that should not be optimally allowed is frequently used and those are the types that are not given in the TD, which should be optimally avoided on the implementation side. e.g. a boolean for a number type of property.

• If the InteractionAffordance has a different security scheme than the one under security of the TD, testVulnerabilities throws.

---

• This link provides all possible postman interaction examples https://documenter.getpostman.com/view/4378601/RWEmHGBq.

• How to use testbench screencast video can be found here https://youtu.be/BDMbXZ2O7KI.

• You can use your browser and the GET requests to inspect all properties during the procedure.

How does the conformance testing work?

• During the whole testing process every step is logged in the CLI if logMode is enabled. Additionally any sent or received Data is written into the test report together with an analysis of the process.
• The testing process consists of four stages:

Starting Phase

• The testbench extracts the schemas of the different interactions (properties, actions and events) from the TD provided in the payload of the GET request.
• It then generates random requests that match these extracted schemas.

Main Phase

• Now every interaction is tested sequentially. This asynchronus testing leeds to a easily readable log.

• Actions

  • The testbench sends a request matching the input specified in the TD.
  • The testbench verifies the actual output against the output specified in the TD.

• Properties:

  • The reading functionality is tested by sending the specified request for readProperty to the Thing and verifying the output against output specified in the TD.
  • The writing functionality is tested by sending the specified request for writeProperty to the Thing. Afterwards the testbench tries to read the property again and checks if the read matched the write. A non matching read is still counted as a pass, due to the fact that the property could have just changed between the write and read request.
  • For observing functionality see Events just with observeProperty and unobserveProperty requests instead of subscribeEvent and unsubscribeEvent requests

• Events (three stages)

  
  • The subscription test
    • The testbench sends the specified request for subscribeEvent to the Thing. Node-wot can in some cases not differentiate between an successful subscription and an unsuccessful subscription with the Thing just not emitting an event, so the subscription test has essentially three different outcomes: Successful, Timeout and Failed. Successful describes the case where node-wot confirms a successful subscription, Timeout describes the case where node-wot can not differentiate (see above) and Failed describes the case where node-wot throws an error during subscription (The timeout length can be configured in the testConfig).
  • The listening phase
    • Is only active if the subscription was successful.
    • The testbench listens for any incoming data for this subscription. Any received data is verified against output specified in the TD.
    • The listening phase ends after a configurable amount of time or when a configurable amount of data packages was received (both options can be configured in the testConfig).
  • The cancel subscription test (depends on the outcome fot the subscription test)
    • If subscription test was successful the testbench sends the specified request for unsubscribeEvent.
    • If subscription test was a timeout, the testbench can not know if the subscription was successful so it does not test anything.
    • If subscription test was a fail the testbench can obviously not cancel the subscription so it does not test anything.

• The test request is returned with the current state of the testReport.

• The testReport property is updated with the current state of the testReport

Synchronous listening Phase (only if events or observable properties are present; optional)

• Can be explicitly deactivated in the testConfig.
• All Events and observable properties are tested again but this time synchronously. This synchronous testing needs significantly less time but results in a pretty hard to read log.
• The timeout length, listening length and the received data package threshold can all be configured independent of the listening phase of the sequential tests in the testConfig.

Ending Phase

• The finished testReport is written to the storage
• If the Synchronous listening phase was present the testReport property is updated to the current state.
• The testbench is reset to be ready for the next test run.

TLDR

How does the coverage testing work?

How does the vulnerability testing work?

Starting Phase

• The security scheme and the string covering that scheme are determined.
• The usernames and passwords (found under Resources/) are read from files. If fastMode is true (this is the case when testVulnerabilities is called from fastTest), then only a small number of username-password pairs are tested, as testing may take significant time intervals which is not the case wanted in fastTest.

Main Phase

• The thing is checked if it has properties and actions.

• If it has properties, then:

  • Every property is checked if it is writeOnly or not.

    • If writeOnly:

      • The request options are created for the writeproperty operation, then dictionary attack is performed.

      • If dictionary attack finds suitable credentials OR credentials are given via config file, then safety tests are performed.

      • During safety testing, property is first checked for writing types that should and should not be optimally allowed, then checked if it is readable.

    • If not writeonly:

      • The request options are created for the readproperty operation, then dictionary attack is performed.

      • If dictionary attack finds suitable credentials OR credentials are given via config file, then safety tests are performed.

      • During safety testing, property is first checked if it is readable, then checked if it is writable. While performing writing tests, property is checked with types that should and should not be optimally allowed.

• If it has actions, then for every action:

  • The request options are created for the invokeaction operation, then dictionary attack is performed.

  • If dictionary attack finds suitable credentials OR credentials are given via config file, then safety tests are performed.

  • During safety testing, action are tested if they accept types that should not be optimally allowed.