Nestable Processes Mutate

    wos

    0.0.22 • Public • Published

    wos

    Monitor traffic for unencrypted data (using tshark) and display a dashboard in terminal.

    Install

    npm install -g wos

    Usage

    $ wos --help
     
      Monitor traffic for unencrypted data and display a dashboard.
     
        Usage
      $ wos -i <interface> [options]
     
        Info
          Capture interface is required. Use ifconfig command to find interfaces.
     
          SSID and password are required if using secured wifi such as WPA or WEP in order to decrypt packets.
     
          Wrap SSID and password in single quotes in order to escape special characters.
     
          After running wos, devices must send perform the EAPOL handshake in order for wos to decrypt their traffic. The handshake is initiated when the device connects or reconnects to the network.
     
        Options
          -i, --interface Capture interface
          -s, --ssid Wifi SSID
          -p, --pass Wifi password
          -c, --channel Wifi channel
          -n, --nomonitor Disable monitor mode
          -f, --format Format: dash (default), text
          -o, --outfile Output file
          -r, --readfile Read pcap file instead of monitoring
     
        Examples
          $ wos -i en0 --ssid='HomeWifi' --pass='d4Pazsw0rD' -o data.txt

    You can simply just run wos command and it'll set up the options based on your current wifi connection.

    $ wos

    You can manually set the network capture interface card, as well as the SSID and password of the network. Those are required in order to decrypt packets on a secured network such as WPA.
    Remember, you can only capture on the same network you are connected to.

    $ wos -i en0 --ssid='HomeWifi' --pass='d4Pazsw0rD'

    WOS supports:

    • Retrieving credentials from unencrypted HTTP pages

    • Retrieving credentials from unencrypted FTP logins

    • Retrieving credentials from unencrypted SMTP logins

    • Retrieving credentials from unencrypted POP logins

    • Retrieving credentials from unencrypted IMAP logins

    • Retrieving data from unencrypted TELNET sessions

    Requirements

    FAQ

    • Q. My wireless card is stuck in monitor mode!

      • A. Kill tshark processes and toggle off and on the wireless card.

        $ pkill tshark
    • Q. I'm monitoring and can see EAPOL handshakes but I'm not capturing data.

      • A. Make sure to set the correct wifi channel when running wos, especially if you're on dual-band wifi. You can only monitor on one channel.

        $ wos -c 36
        
    • Q. What does WOS mean?

    License

    MIT

    Install

    npm i wos

    DownloadsWeekly Downloads

    5

    Version

    0.0.22

    License

    MIT

    Last publish

    Collaborators

    • miguelmota