SSH Tunnel Manager

NodeJS based applicaton for easy managing SSH tunnels. Tunnels are managed within groups, if you only need one tunnel then the ssh command is probably better suited. You can specify multiple connection profiles such for integration and production systems. As for integration system you often need to specify dynamic hostnames - SSH tunnel manager also supports this via variables. In addition to the configuration file there is also support to specify (or use a default) tunnel configuration file. This is helpful for application maintainers who have the best knowledge about services used in this application. Contributors then only need to start the tunnel manager in this directory or specify this file on startup.

---

Why another tunnel manager

First of all when you are reading this you might came here for a reason. However there are more:

• NodeJS based and runs on the common OS systems like linux,mac or windows without having more installed than node.
• Easy to use on command line and still powerful in configuration
• Detached tunnel and connection configuration (it's up to you to consider this pro or con)
• Support for variables in host names for tunnels (a feature most important to me)

---

Features

• organize tunnels in groups
• multiple connection profiles (with default support)
• reconnect if the tunnel host is no reachable while tunnels are setup
• tunnel config files in addition to global config
• variables in remote hosts to support "dynamic" tunnels
• full CLI interface for intuitive configuring (no need to edit config manually)
• easy to use even for people not experienced with ssh

Installation

$ npm install -g ssh-tunnel-manager

Usage

$ ssh-tunnel-manager --help

The CLI interface uses commands and sub commands to configure the tunnels. Commands und subcommands are

• profile
  • list
  • add
  • remove
  • default
• tunnel
  • list
  • add
  • remove

The configuration section will cover the most, generally you can always use

$ ssh-tunnel-manager <COMMAND> --help

or

$ ssh-tunnel-manager <COMMAND> <SUBCOMMAND> --help

Setting up tunnels

If you haven't done any configuration you would be prompted on first startup. You might better go first reading the configuration section.

If you want to run a configured tunnel and setup a profile as default you simply run

$ ssh-tunnel-manager -t <NAME>

If you have a file call ssh-tunnels.yml where tunnels are setup it's even easier

$ ssh-tunnel-manager

If you want a specific connection profile or don't have one set as default use

$ ssh-tunnel-manager -p <PROFILE NAME>

or

$ ssh-tunnel-manager -p <PROFILE NAME> -t <TUNNEL GROUP>

You can use the -t or --tunnel option multiple times or use a comma separated string to run more tunnel groups

$ ssh-tunnel-manager -p <PROFILE NAME> -t <TUNNEL GROUP> -t <TUNNEL GROUP>

or

$ ssh-tunnel-manager -p <PROFILE NAME> -t <TUNNEL GROUP,TUNNEL_GROUP,...>

Using variables

If the tunnels to run requires variables to be set you'll be prompted so. The use would then be

$ ssh-tunnel-manager -v VAR:VALUE -v VAR2:VALUE2

Configuration

Configuration files are stored in the OS config directory tunnel-manager/tunnel-manager.yml. You don't have do edit the configuration manually. You can configure everything with the CLI interface.

Connection profiles

Connection profiles are used to switch between hosts you tunnel thru. This may be handy if you have multiple VPNs but still have the same remote services you want to tunnel to. You can specify a profile as default so you don't have to specify a profile when you want to start tunnels.

Showing the configured connection profiles

$ ssh-tunnel-manager profile list

Adding connection profiles

To get help adding a connection profile use

$ ssh-tunnel-manager profile add --help

Basically the following syntax

$ ssh-tunnel-manager profile add <NAME> <USER@HOST> [-i <FILE TO PRIVATE KEY>] [-p <PASSWORD>] [--password-interactive] [--default]

NAME is the name you use on command line to specify the connection profile you want to use. You can create as many as you want, but use only one at a time

USER@HOST specifies the username you want to use to connect to the host to tunnel thru.

FILE TO PRIVATE KEY is a SSH identity file you want to use. ie. ~/.ssh/id_dsa (NOTE: its not the public key!)

PASSWORD if you want to connect to this host using a password (NOT RECOMMENDED). If you want to enter your password but not store it use the --password-interactive instead of -p. Note that the server needs to support this!

Removing connection profiles

$ ssh-tunnel-manager profile remove <NAME>

Tunnel groups and tunnels

Tunnel groups are just names which holds a list of tunnels. In most cases you need to setup a bunch of tunnels and it would be just bad usability to specify all tunnels (tho in theory you can have a group with only one tunnel so you are not limited to to this). Each tunnel must have a group assigned - beside the list option you always need to provide the group. If the group exists on create the tunnel will just added to the existing group. If you remove all tunnels from a group the group itself is also removed.

Listing all configured tunnels

$ ssh-tunnel-manager tunnel list

Adding a tunnel

To get a help for creating use

$ ssh-tunnel-manager tunnel add --help

In short version the syntax us as following

$ ssh-tunnel-manager tunnel add -g <GROUP> <NAME> <TUNNEL STRING> [--source-port <PORT>] [--host <REMOTE HOST>] [--dest-port <PORT>] [--force]

GROUP is the name of the tunnel group. If the group does not exists yet it will be created.

NAME the name of the tunnel. For easier identifying the log messages

TUNNEL STRING an alternative (quicker) way to specifiy the tunnel in a format of source port:host:dest_port

Removing a tunnel

$ ssh-tunnel-manager tunnel remove -g <GROUP> [<NAME>]

GROUP the name of the group you want to remove (if no is specified the whole group is removed!)

NAME the name of the tunnel to remove. Can be left blank to remove all tunnels in the specified group

Tunnel configuration files (not global config!)

Tunnel configuration files are used in addition to the global configured ones to make it simply to maintain required tunnels where the application actually is maintained. The default tunnel configuration searched for when no file is specified is ssh-tunnels.yml in the current directory. If can use -f TUNNEL CONFIG to specify a different path or filename. The format of the tunnel is YAML (like the global configuration). Example tunnel-config is included in this module (look at ssh-tunnels.yml.samle). Basically the format is:

NAME: SOURCE_PORT:HOST:DEST_PORT
NAME: SOURCE_PORT:HOST:DEST_PORT
NAME: SOURCE_PORT:HOST:DEST_PORT

The thinking behind is to put a file named ssh-tunnels.yml to an application and define all tunnels for this application in there. A user of this application then doesn't need to have much knowledge on his own what tunnels this application requires. If the tunnels using variables which aren't defined on start of the ssh-tunnel-manager you are requested to pass the values for the variables.

Examples

ssh-tunnel-manager profile add qa [e-mail] --defaut
ssh-tunnel-manager tunnel add -g db geodb 3308:geodb.qa.company.de:3306
ssh-tunnel-manager tunnel add -g db customerdb 3308:customerdb.qa.{ENV}.company.de:3306
ssh-tunnel-manager tunnel add -g db statistics 27017:statdb.qa.{ENV}.company.de:27017
ssh-tunnel-manager tunnel add -g services geodb 8085:geoservice.qa.company.de:8000
ssh-tunnel-manager tunnel add -g services statservice 8086:statservice.qa.{ENV}.qa.company.de:8000
 
ssh-tunnel-manager -t db,services -v env:myteam