1.2.0 • Public • Published


Build Status Dependency Status Coverage Status NPM version Inline docs

Scraperjs is a web scraper module that make scraping the web an easy job.


npm install scraperjs

If you would like to test (this is optional and requires the installation with the --save-dev tag),

grunt test

To use some features you’ll need to install phantomjs, if you haven’t already

Getting started

Scraperjs exposes two different scrapers,

  • a SimpleScraper, that is light fast and with a low footprint, however it doesn't allow for more complex situations, like scraping dynamic content.
  • a DynamicScraper, that is a bit more heavy, but allows you to scrape dynamic content, like in the browser console. both scrapers expose a very similar API, with some minor differences when it comes to scraping.

Lets scrape Hacker News, with both scrapers.

Try to spot the differences.

Static Scraper

var scraperjs = require('scraperjs');
    .scrape(function($) {
        return $(".title a").map(function() {
            return $(this).text();
    .then(function(news) {

The scrape promise receives a function that will scrape the page and return the result, it only receives jQuery a parameter to scrape the page. Still, very powerful. It uses cheerio to do the magic behind the scenes.

Dynamic Scraper

var scraperjs = require('scraperjs');
    .scrape(function($) {
        return $(".title a").map(function() {
            return $(this).text();
    .then(function(news) {

Again, the scrape promise receives a function to scrape the page, the only difference is that, because we're using a dynamic scraper, the scraping function is sandboxed only with the page scope, so no closures! This means that in this (and only in this) scraper you can't call a function that has not been defined inside the scraping function. Also, the result of the scraping function must be JSON-serializable. We use phantom and phantomjs to make it happen, we also inject jQuery for you.

However, it's possible to pass JSON-serializable data to any scraper.

The $ varible received by the scraping function is, only for the dynamic scraper, hardcoded.

Show me the way! (aka Routes)

For a more flexible scraping and crawling of the web sometimes we need to go through multiple web sites and we don't want map every possible url format. For that scraperjs provides the Router class.


var scraperjs = require('scraperjs'),
    router = new scraperjs.Router();
    .otherwise(function(url) {
    console.log("Url '"+url+"' couldn't be routed.");
var path = {};
    .scrape(function($) {
        return $("a").map(function() {
            return $(this).attr("href");
    .then(function(links, utils) {
        path[] = links
router.route("", function() {
    console.log("i'm done");

Code that allows for parameters in paths is from the project Routes.js, information about the path formating is there too.

API overview

Scraperjs uses promises whenever possible.

StaticScraper, DynamicScraper and ScraperPromise

So, the scrapers should be used with the ScraperPromise. By creating a scraper

var scraperPromise = scraperjs.StaticScraper.create() // or DynamicScraper

The following promises can be made over it, they all return a scraper promise,

  • onStatusCode(code:number, callback:function(utils:Object)), executes the callback when the status code is equal to the code,
  • onStatusCode(callback:function(code:number, utils:Object)), executes the callback when receives the status code. The callback receives the current status code,
  • delay(time:number, callback:function(last:?, utils:Object)), delays the execution of the chain by time (in milliseconds),
  • timeout(time:number, callback:function(last:?, utils:Object)), executes the callback function after time (in milliseconds),
  • then(lastResult:?, callback:function(last:?, utils:Object)), executes the callback after the last promise,
  • async(callback:function(last:?, done:function(result:?, err:?), utils)), executes the callback, stopping the promise chain, resuming it when the done function is called. You can provide a result to be passed down the promise chain, or an error to trigger the catch promise,
  • catch(callback:function(error:Error, utils:Object)), executes the callback when there was an error, errors block the execution of the chain even if the promise was not defined,
  • done(callback:function(last:?, utils:Object)), executes the callback at the end of the promise chain, this is always executed, even if there was an error,
  • get(url:string), makes a simple HTTP GET request to the url. This promise should be used only once per scraper.
  • request(options:Object), makes a (possibly) more complex HTTP request, scraperjs uses the request module, and this method is a simple wrapper of request.request(). This promise should be used only once per scraper.
  • scrape(scrapeFn:function(...?), callback:function(result:?, utils:Object)=, ...?), scrapes the page. It executes the scrapeFn and passes it's result to the callback. When using the StaticScraper, the scrapeFn receives a jQuery function that is used to scrape the page. When using the DynamicScraper, the scrapeFn doesn't receive anything and can only return a JSON-serializable type. Optionally an arbitrary number of arguments can be passed to the scraping function. The callback may be omitted, if so, the result of the scraping may be accessed with the then promise or utils.lastReturn in the next promise.

All callback functions receive as their last parameter a utils object, with it the parameters of an url from a router can be accessed. Also the chain can be stopped.

    .then(function(_, utils) {
        // utils.params.paramName

The promise chain is fired with the same sequence it was declared, with the exception of the promises get and request that fire the chain when they've received a valid response, and the promises done and catch, which were explained above.

You can also waterfall values between promises by returning them (with the exception of the promise timeout, that will always return undefined) and it can be access through utils.lastReturn.

The utils object

You've seen the utils object that is passed to promises, it provides useful information and methods to your promises. Here's what you can do with it:

  • .lastResult, value returned in the last promise
  • .stop(), function to stop the promise chain,
  • .url, url provided to do the scraper,
  • .params, object with the parameters defined in the router matching pattern.
A more powerful DynamicScraper.

When lots of instances of DynamicScraper are needed, it's creation gets really heavy on resources and takes a lot of time. To make this more lighter you can use a factory, that will create only one PhantomJS instance, and every DynamicScraper will request a page to work with. To use it you must start the factory before any DynamicSrcaper is created, scraperjs.DynamicScraper.startFactory() and then close the factory after the execution of your program, scraperjs.DynamicScraper.closeFactory(). To make the scraping function more robust you can inject code into the page,

var ds = scraperjs.DynamicScraper
    .async(function(_, done, utils) {
        utils.scraper.inject(__dirname+'/path/to/code.js', function(err) {
            // in this case if there was an error won't fire catch promise.
            if(err) {
            } else {
    .scrape(function() {
        return functionInTheCodeInjected();
    .then(function(result) {


The router should be initialized like a class

var router = new scraperjs.Router(options);

The options object is optional, and these are the options:

  • firstMatch, a boolean, if true the routing will stop once the first path is matched, the default is false.

The following promises can be made over it,

  • on(path:string|RegExp|function(url:string)), makes the promise for the match url or regular expression, alternatively you can use a function to accept or not a passed url. The promises get or request and createStatic or createDynamic are expected after the on promise.
  • get(), makes so that the page matched will be requested with a simple HTTP request,
  • request(options:Object), makes so that the page matched will be requested with a possible more complex HTTP request, , scraperjs uses the request module, and this method is a simple wrapper of request.request(),
  • createStatic(), associates a static scraper to use to scrape the matched page, this returns ScraperPromise, so any promise made from now on will be made over a ScraperPromise of a StaticScraper. Also the done promise of the scraper will not be available.
  • createDynamic(), associates a dynamic scraper to use to scrape the matched page, this returns ScraperPromise, so any promise made from now on will be made over a ScraperPromise of a DynamicScraper. Also the done promise of the scraper will not be available.
  • route(url:string, callback:function(boolean)), routes an url through all matched paths, calls the callback when it's executed, true is passed if the route was successful, false otherwise.
  • use(scraperInstance:ScraperPromise), uses a ScraperPromise already instantiated.
  • otherwise(callback:function(url:string)), executes the callback function if the routing url didn't match any path.
  • catch(callback:function(url:string, error:Error)), executes the callback when an error occurred on the routing scope, not on any scraper, for that situations you should use the catch promise of the scraper.


  • Scraperjs always fetches the document with request, and then when using a DynamicScraper, leverages phantom's setContent() to set the body of the page object. This will result in subtly different processing of web pages compared to directly loading a URL in PhantomJS.


Check the examples, the tests or just dig into the code, it's well documented and it's simple to understand.


As mentioned above, scraperjs is uses some dependencies to do the the heavy work, such as

  • async, for flow control
  • request, to make HTTP requests, again, if you want more complex requests see it's documentation
  • phantom + phantomjs, phantom is an awesome module that links node to phantom, used in the DynamicScraper
  • cheerio, light and fast DOM manipulation, used to implement the StaticScraper
  • jquery, to include jquery in the DynamicScraper
  • although Routes.js is great, scraperjs doesn't use it to maintain it's "interface layout", but the code to transform the path given on the on promise to regular expressions is from them


This project is under the MIT license.



Package Sidebar


npm i scraperjs

Weekly Downloads






Last publish


  • ruipgil