pimatic-zwave-usb

zwave-usb-plugin

Prerequisites

important notice

openzwave needs to be installed on your system before you can use this plugin!! Please read this first: node-openzwave-shared

It has lots of README files which guide you through the installation process.

• Raspbian
• Ubuntu
• Check the repository for more information

Equipment

You will also need a ZWave USB stick.

• Tested with the The Aeotec Z-Stick Gen5.
• Tested with a Z-wave plus USB stick Model name: ZU1401EU. I think other zwave sticks will also work.

Tested Z-Wave devices

• Danfoss LC13
• a power plug
• Door/Window sensor from Devolo. This device has a contact sensor, temperature sensor and lightness sensor included.

What can this plugin do?

• Control Devices

  • Power switch (class id: 32)
  • Thermostat (class id: 67)
  • Door/Window Sensor (class id: 49) and (class id: 48)
    • contact and temperature support

• Auto-discover ZWave devices

View all command classes

Plugin settings in Pimatic

Example USB port for Linux: '/dev/ttyUSB0' Example USB port for Windows '\\.\COM3'

    {
      "plugin": "zwave-usb",
      "usb": "/dev/ttyUSB0",
      "debug": false
    }

Device settings in Pimatic

I suggest using auto-discovery but if you want to add it manually:

For a thermostat or a window contact sensor its possible to configure a sync timeout. This means that in case the z-wave device didnt update his values in this timeframe (configured in minutes) then the device is not synced anymore with pimatic.

thermostat device

    {
      "id": "zwave-thermostat",
      "name": "ZWave Thermostat",
      "node": 4,
      "class": "ZwaveThermostat"
      "syncTimeout": 45
    }

PowerSwitch device

    {
      "id": "zwave-switch",
      "name": "ZWave PowerSwitch",
      "node": 5,
      "class": "ZwavePowerSwitch"
    }

door window contact sensor

    {
      "id": "zwave-window-sensor",
      "name": "ZWave WindowSensor",
      "node": 3,
      "class": "ZwaveWindowSensor"
      "syncTimeout": 45
    }

Note

I kept getting the error "libopenzwave.so.1.4" in the "/usr/local/lib64" Searched for this on Google and found the following solution (I use Ubuntu 14.04 so not sure if this will work for every system):

  sudo ldconfig /usr/local/lib64

I automated this by adding ldconfig /usr/local/lib64 to my Pimatic startup script.

To-do

• PowerSwitch device
• Thermostat device
• Automatic device discovery
• Include/Exclude devices with Software
• Reset Z-wave network / Heal Z-wave network
• Add multi level switch (SWITCH_MULTILEVEL) request: https://forum.pimatic.org/topic/2508/pimatic-zwave-usb-another-way-to-control-z-wave-devices

Support more devices

In the future I definitely want to support more devices. I only have two ZWave devices at the moment, If you want me to implement more devices you can donate them. Just send me a message on the Pimatic forum. You can also extend the plugin yourself, just create a pull request!