node-red-contrib-tplink-tapo-connect-api

Unofficial node-RED node for connecting to TP-Link Tapo devices. Currently limited to the P100 & P105 smart plugs and L510E smart bulbs.

nodes

• toggle

  

  This node module provides the ability to toggle (on / off) the power of tapo smart plugs.

• turn-on

  

  This node module provides the ability to power on tapo smart plugs.

• turn-off

  

  This node module provides the ability to power off tapo smart plugs.

• brightness

  

  This node module provides the ability to set the brightness of tapo smart bulbs.

• colour

  

  This node module provides the ability to set the color of tapo smart bulbs.

• command

  

  This node module provides several features by input "msg.payload.command".

  1. power

     tapo device power on/off

     msg.payload.option

     0: tapo device power off
     1: tapo device power on

  2. toggle

     tapo device power on/off(toggle)

  3. status

     get tapo device info

• status

  

  This node module provides the ability to get the device infomation of tapo smart plugs.

  Models that can monitor energy acquire energy information.

  Get the device information from "output: msg.payload.tapoDeviceInfo, msg.payload?.tapoEnergyUsage(P110 only)".

• tplink_tapo_connect_api(deprecated)

  

  This "node module: tplink_tapo_connect_api" has been left for compatibility, this module may be deleted without notice.

Pre-requisites

The node-red-contrib-tplink-tapo-connect-api requires Node-RED 1.00 to be installed.

Quick Start

To pull from docker hub:

docker pull sanlike0911/node-red-tplink-tapo-connect-api:latest

Install

npm install node-red-contrib-tplink-tapo-connect-api

Usage

• Properties

  

  • Name

    Set the node name displayed in the flow.

  • Email

    Set the email address registered with Tp Link.

  • Password

    Set the password registered with Tp Link.

  • Search mode

    Select a search mode for the tapo device.

    [Usage]

    • ip : search by ip. (It's fast.)
    • alias: search by alias and ip range.

  • Tapo ipaddress(selected: ip)

    Set the IP address to the Tapo device.

  • Tapo alias(selected: alias)

    set the tapo device alias registered with Tp Link.

  • Tapo find ip range(selected: alias)

    set the IP range to search for Tapo device.

    [Usage]

    • case1: "192.168.0.1 to 192.168.0.25"
    • case2: "192.168.0.0/24"

Inputs

msg.payload

type searchModeTypes = "ip" | "alias";
type commandTypes = "" | "power" | "toggle" | "status";

type payload {
    email: string;
    password: string;
    deviceIp: string;
    deviceAlias: string;
    deviceIpRange: string;
    searchMode : searchModeTypes;
    command: commandTypes;          /* "node-command" only */
    option: {                       /* "node-command" only */
        power?: number;
    };
    colour: string;                 /* "node-colour" only */
    brightness: numbar;             /* "node-brightness" only */
}

[example1]

msg = {
  "email": "[e-mail]",
  "password": "password",
  "deviceIp": "192.168.0.xxx",
  "command": "power",
  "option": {
    "power": 0
  }
}

[example2]

msg = {
  "email": "[e-mail]",
  "password": "password",
  "deviceIp": "192.168.0.xxx",
  "command": "toggle"
}

Outputs

The processing result is passed by msg.payload. It consists of an object that contains the following properties:

type tapoConnectResults = {
    result: boolean; /* true: success, false: failure */
    tapoDeviceInfo?: tapoDeviceInfo; /* smart plug device infomation */
    errorInf?: Error;
}

[smart plug device infomation]

You can tell if the device is on or off by getting "device_on".

true: smart plug power on
false: smart plug power off

{
    result: true,
    tapoDeviceInfo: {
      device_id: "*************"
      fw_ver: "1.2.10 Build 20200609 Rel. 33394"
      hw_ver: "1.0.0"
      type: "SMART.TAPOPLUG"
      model: "P105"
      mac: "XX-XX-XX-XX-XX-XX"
      hw_id: "*************"
      fw_id: "*************"
      oem_id: "*************"
      specs: "JP"
      device_on: false
      on_time: 0
      overheated: false
      nickname: "3d printer power supply"
      location: "XXXXXXXXXXXXXXXX"
      avatar: "plug"
      time_usage_today: 0
      time_usage_past7: 0
      time_usage_past30: 0
      longitude: 0
      latitude: 0
      has_set_location_info: true
      ip: "192.168.0.XXX"
      ssid: "SSID"
      signal_level: 0
      rssi: 0
      region: "Asia/Tokyo"
      time_diff: 0
      lang: "ja_JP"
    },
    tapoEnergyUsage: {
      ????
    }
}

npm-scripts

There are some npm-scripts to help developments.

• npm install - Install the testing environment in your project.
• npm run build - Make ./data/my-node directory from the src directory and Install the my-node in Node-RED.
• npm run start - Start Node-RED. "http://localhost:1880"

file list

[root]
│  package.json
│  README.md
│  tsconfig.json
│
├─data -> `Node-Red work files`
│  │  
│  ├─my-node -> `project files` The resource files and built files should be placed here.
│  │  │  package.json
│  │  │
│  │  └─nodes -> The resource files and built files should be placed here.
│  │     └─...
│  │
│  └─node_modules
│     └─...
│
├─dist -> `The project built files`
├─examples -> `node-RED flow files`
├─figs
└─src
    └─nodes -> project files
        ├─icons
        ├─lib
        ├─locales
        │  ├─en-US
        │  └─ja
        └─test