mimosa-bower

2.0.0 • Public • Published

mimosa-bower

This is a Bower integration module for the Mimosa build tool.

For more information regarding Bower, see http://bower.io/.

For more information regarding Mimosa, see http://mimosa.io.

What is Bower?

This is how Bower describes itself:

Bower is a package manager for the web. It offers a generic, unopinionated solution to the problem of front-end package management, while exposing the package dependency model via an API that can be consumed by a more opinionated build stack. There are no system wide dependencies, no dependencies are shared between different apps, and the dependency tree is flat.

It mentions an "opinionated build stack". This module is an opinionated usage of Bower for Mimosa.

Usage

Including the module

Add 'bower' to your list of modules. That's all! Mimosa will install the module for you when you start mimosa watch or mimosa build.

During mimosa watch and mimosa build

When mimosa watch or mimosa build start, mimosa-bower will attempt to detect if an install is needed and if it is an install will be run before assets are processed.

Additional Commands

When mimosa-bower is included in your project, the following commands are available.

bower

mimosa bower provides one off access to Bower installs without kicking off mimosa watch or mimosa build.

bower:install <names,of,modules> [-d/--savedev]

mimosa bower:install will install one to many modules into your application and save the new modules to the dependencies array of the bower.json. To save to the devDependencies, add a [-d/--savedev] flag. You can even use version numbers when installing modules. Example: mimosa bower:install backbone,underscore,jquery#1.8.1

bower:clean [-c/--cache]

mimosa bower:clean will remove all of the Bower installed dependencies from their target directories in the vendor folder. It will also clean up any Bower package related folders that then become empty. Finally it will clean up the bower.bowerDir.path folder, removing all the temporary assets.

mimosa bower:clean --cache, in addition to cleaning up installed dependencies, will also clean the Bower cache. This often is necessary when Bower updates, or if packages get updated without new versions.

Functionality

mimosa-bower requires a valid bower.json at the root of project (in the same directory as mimosa-config).

When will a Bower install be kicked off?

When mimosa bower, mimosa watch or mimosa build are executed, mimosa-bower will assess whether or not any packages need to be installed and install them to the bower.bowerDir.path directory, by default .mimosa/bower/bower_components.

If bower.copy.trackChanges is set to true (the default), mimosa-bower keeps track of two artifacts to help it determine if installs need to occur. First, it keeps track of the bower.json that was last used for an install. If the current bower.json is different, an install will be executed. Second, mimosa-bower keeps track of the bower section of your project's mimosa-config for the last install. If it changes, an install will be executed.

If bower.copy.trackChanges is set to false and bower.bowerDir.clean is set to false, Bower default processing will check to see if an install is necessary based on the contents of the bower.bowerDir.path. If it detects that nothing has changed, no install will be run.

If bower.copy.trackChanges is set to false and bower.bowerDir.clean is set to true (not recommended), then mimosa-bower has no way to determine if an install is necessary so the Bower functionality does not register itself to be run during mimosa watch and mimosa build. In this case it must be executed using the mimosa bower command.

Where are assets initially copied?

bower.bowerDir.path is the location where all of the package assets are initially copied by Bower. In most cases this include the entire contents of the GitHub repositories for the packages you have selected.

Because it uses entire GitHub repositories, and you probably do not want that code inside your project's source directories, bower.bowerDir.path is set to .mimosa/bower/bower_components.

It is the goal of the rest of the configuration, covered below, to decide what are the key files from each package, and where in your source directories those files should be placed. By default, once the assets are copied into your project's source, the content of bower.bowerDir.path is cleaned. To turn this off, set bower.bowerDir.clean to false.

What assets are copied into the project's source?

If bower.copy.enabled is set to true then mimosa-bower will attempt to copy files from the bower.bowerDir.path and into your project's source code.

By default, mimosa-bower expects to find a main property in the bower.json of any packages it uses. If mimosa-bower cannot identify the main files for a package because a main property hasn't been provided by the package author, mimosa-bower will indicate that via a message to the console. In cases where the main files are not provided, or when you want to include files other than the ones the package author has indicated, you can use bower.copy.mainOverrides.

The jquery bower.json indicates that jquery.js is the main file. By default mimosa-bower will copy that file in. If you want the minified file, you would need to provide a mainOverrides config.

The following config will copy in both the jquery.js and the jquery.min.js

bower: {
  copy: {
    mainOverrides: {
      jquery:["dist/jquery.js", "dist/jquery.min.js"]
    }
  }
}

Version collisions?

If Bower encounters any version collisions -- for instance if two different packages have a dependency on the same library, but different versions -- it will automatically choose the latest version for that library because bower.copy.forceLatest is set to true by default. If it is not set to true, the Bower install will error out and the collision will need to be addressed.

A typical way to address collisions is to use the resolutions config in the bower.json.

Copying assets into a project using strategy and mainOverrides

For the explanations below, I'll use the leaflet.draw package for an example. leaflet.draw has the following assets as specified by the main property in its bower.json.

dist/
  leaflet.draw-src.js
  leaflet.draw.css
  images/
    spritesheet-2x.png
    spritesheet.png

When packages are installed, mimosa-bower moves the main files into the vendor directories as indicated by Mimosa's vendor config. The bower.copy.strategy and/or bower.copy.mainOverrides determine how those main files are copied over.

Strategy: packageRoot (the default strategy)

packageRoot places files inside a folder named for the package within the appropriate vendor directory. This strategy will flatten any folder structure. This strategy will also pull apart .js files and place them in vendor.javascripts while everything else goes in stylesheets.

For leaflet.draw, an example packageRoot output given Mimosa's defaults would be:

/javascripts
  /vendor
    /leaflet.draw
      leaflet.draw-src.js
/stylesheets
  /vendor
    /leaflet.draw
      leaflet.draw.css
      spritesheet-2x.png
      spritesheet.png

Note that non-js files end up in stylesheets and note that the folder structure has been flatted (there is no images folder).

Strategy: vendorRoot

vendorRoot places files directly in the vendor folder. This strategy will flatten any folder structure. This strategy will also pull apart .js files and place them in vendor.javascripts while everything else goes in stylesheets.

For leaflet.draw, an example vendorRoot output given Mimosa's defaults would be:

/javascripts
  /vendor
    leaflet.draw-src.js
/stylesheets
  /vendor
    leaflet.draw.css
    spritesheet-2x.png
    spritesheet.png

Note that non-js files end up in stylesheets and note that the folder structure has been flatted (there is no images folder).

Strategy: none

none is the same as packageRoot, but it will not flatten folder structures. This strategy will pull apart .js files and place them in vendor.javascripts while everything else goes in stylesheets.

For leaflet.draw, an example none output given Mimosa's defaults would be:

/javascripts
  /vendor
    /leaflet.draw
      /dist
        leaflet.draw-src.js
/stylesheets
  /vendor
    /leaflet.draw
      /dist
        leaflet.draw.css
        /images
          spritesheet-2x.png
          spritesheet.png

Note that non-js files end up in stylesheets and note that the folder structure has not been flatted (there is an images and dist folder).

Strategy: together

together allows packages that contained mixed content, like Polymer components, to remain together. Anything having a strategy of together will be placed in the bower.copy.togetherRoot folder which is set to components by default. togetherRoot is relative to watch.sourceDir so it sits at the same level as stylesheets and javascripts. together will not flatten directories.

For leaflet.draw, an example together output given Mimosa's defaults would be:

/components
  /leaflet.draw
    /dist
      leaflet.draw-src.js
      leaflet.draw.css
      /images
        spritesheet-2x.png
        spritesheet.png

mainOverrides object copy

If you want to be very specific about what assets you want and where you want them to go, you can use mainOverrides.

Consider the following mainOverrides config.

bower: {
  copy: {
    mainOverrides:{
      "font-awesome": [
        "css/font-awesome.css",
        "css/font-awesome-ie7.css",
        { font: "../../font" }
      ]
    }
  }
}

The mainOverrides above has three entries. Two of them are simply .css files. These files will be copied into vendor.stylesheets according to the strategy that applies to font-awesome (in the above case it is packageRoot because that is the default and no other strategy has been supplied). By referring to the files directly, the files will be copied in without their css folder included.

The 3rd entry is an object. This object can be used to take very specific files and folders and place them in very specific places. In this case the font folder inside the font-awesome package will be placed at ../../font. The path is relative to vendor.stylesheets because that is where these assets would be placed otherwise. So, in this case, a font folder will be created at the same level as javascripts.

/javascripts
  /vendor
/stylesheets
  /vendor
    /font-awesome
      font-awesome.css
      font-awesome-ie7.css
/font
  -- the contents of the font-awesome/font directory --

Default Config

bower: {
  watch:true,
  bowerDir: {
    path: ".mimosa/bower/bower_components",
    clean: true
  },
  copy: {
    enabled: true,
    trackChanges: true,
    outRoot: null,
    exclude:[],
    unknownMainFullCopy: false,
    mainOverrides: {},
    strategy: "packageRoot",
    togetherRoot: "components",
    forceLatest: true,
    pathMod: []
  }
}

bower.watch boolean

When true, mimosa-bower will watch the bower.json for changes, and when the file changes, run a Bower install.

bower.bowerDir.path string

The path to where mimosa-bower will initially install Bower assets before moving the key assets into the watch.sourceDir. This is relative to the root of the project.

bower.bowerDir.clean boolean

Indicates whether or not to remove temporary Bower assets after install. Bower downloads entire GitHub repositories, so cleaning them keeps your project from having those kept around.

bower.copy.enabled boolean

Indicates whether or not to copy assets out of the bowerDir.path and into watch.sourceDir.

bower.copy.trackChanges boolean

See When will a Bower install be kicked off? above.

bower.copy.outRoot string

Path to append to the vendor directories before copying in assets. All copied assets would go inside this directory. Example: "bower-managed". null, the default, means no outRoot is applied.

bower.copy.exclude array of strings/regexes

Matches files to exclude from copying. Paths should be relative to the bowerDir.path or absolute. String paths must include the file name.

bower.copy.unknownMainFullCopy boolean

When set will force the copy of all Bower module assets into the vendor output directory. This will likely copy a lot of undesirable assets, but if that isn't a problem, setting this property is a quick way to get files copied over without the hassle of configuring mainOverrides (below).

bower.copy.mainOverrides object

Allows for setting which files should be copied for a package either when the main files cannot be determined or when files other than the main files are desired. The key for this object is the name of the package. The value is an array of path strings pointing to the package's desired files. The paths should be relative to the root of the package. For example: {"json2":["json2.js","json_parse.js"]}. When paths point to directories, all the directory's files will be copied. mainOverrides packages can also be provided an object in addition to string paths. The object maps input paths to output paths and allow for specific placement of files and folders. Ex {"json2":[{"json2.js":"json-utils/json2.js"}]. In this case the json2.js file will be placed in json-utils/json2.js in the vendor.javascripts folder. If a file is provided as opposed to a directory, the output path must specify the output file name. Any directories copied in this way are copied entirely without manipulation of the folder structure.

bower.copy.strategy string or object

The copying strategy. See above docs for details on strategies. When using a string, all packages will use the provided strategy. When using an object, the keys should match the names of packages and values should be specific strategy types. The key of * provides a default strategy if packageRoot is not desired. If only 2 of 10 packages are specified in the object, the rest get the */default strategy. Key names can be a regex, for instance "/^paper-/" will match all packages that start with "paper-".

bower.copy.togetherRoot string

The path, relative to watch.sourceDir, where packages with the together strategy will be placed.

bower.copy.forceLatest boolean

A means to quickly fix any problems with library version collisions. If you want to install the latest jquery, but one of your other libraries wants to install an older version the install will fail. This flag will ensure the the latest version is selected and the Bower install will continue. When the forceLatest results in a selection, a warning message is logged with the details of which version was picked and which versions were not.

bower.copy.pathMod array of strings/regexes

Used to strip full pieces of a path from the output file when the selected strategy is none or a mainOverrides object is used. For example, if a Bower package script is in packageName/lib/js/foo.js and pathMod is set to ["lib", "js"] the output path would have lib and js stripped.

Example Config 1, mainOverrides options

Awhile ago I put together this gist which includes a tangible example configuration and some explanation for how each piece works.

Example Config 2, together strategy

bower: {
  copy: {
    strategy: {
      "/^(polymer|paper-|core-|font-)/": "together"
    },
    unknownMainFullCopy: true
  }
}

This is from the polymer demo project. This example shows the use of the together strategy along with regex matching on package names. In this case the togetherRoot isn't changed from its default of components. So the result of this would be that all packages that start with polymer, paper-, core-, or font-, will be placed inside components in their entirety.

All other packages, like jquery or requirejs, continue to use the packageRoot default strategy and will be placed in vendor.javascripts/vendor.stylesheets.

unknownMainFullCopy means that in cases where the main cannot be determined, the entire content of the repo will be used.

Dependencies (4)

Dev Dependencies (0)

    Package Sidebar

    Install

    npm i mimosa-bower

    Weekly Downloads

    1

    Version

    2.0.0

    License

    MIT

    Last publish

    Collaborators

    • dbashford