Nutmeg Pumpkin Macchiato

    iobroker.mihome-airpurifier

    0.1.8 • Public • Published


    Logo

    ioBroker.mihome-airpurifier

    Number of Installations Number of Installations Xiaomi Air Purifier adapter for ioBroker IoT platform.Build Status

    How to get the token?

    You have to install the miio command line tool npm install -g miio

    Now you have two options:

    1. With Mi Home App:

      You connect the purifier with MI Home App to your Wifi Network and then run the following command:

      miio discover

      You should get the following output and can save the token.

      Device ID: 48765421
      Model info: zhimi.airpurifier.m1
      Address: 192.168.100.9
      Token: token-as-hex-here via auto-token
      Support: At least basic
      
    2. Without Mi Home App:

      You reset the WIFI settings of the air purifier. Then you connect your network with the WIFI of the air purifier and run the following command:

      miio discover

      You should get the same output as above and can now configure the connection to your network by following command:

      miio configure id-or-address --ssid ssid-of-network --passwd password-of-network

      Now the air purifier is connected to your network.

    Cloud Connection

    To control the Air Purifier with the cloud adapter just add the state "manuallevel" to your Cloud Adapter. After that you can send f.e. the following commands through Alexa:

    Alexa, turn the air purifier on,

    Alexa, set the air purifier to 50%,

    Alexa, turn the air purifier off

    If you set in the Cloud adapter the "On Value" to "Last active value", the device always start running in the latest active power level.

    Control States

    To control your air purifier, the following objects can be written:

    State Description
    power Turn the device on / off
    auto Activate the auto mode of the device.
    silent Activate the silent mode of the device.
    manual Activate the manual mode of the device.
    manuallevel Control the power of the manual mode in the range from 0-100%. This will also turn on / off the device if necessary
    led Turn the auto led on / off
    buzzer Turn the buzzer on / off

    Info States

    The following information is collected from your air purifier (read-only states):

    Device Info

    State Description
    mode The actual device mode, just valid, if the device is powered on.
    temperature The measured temperature in °C of the device.
    humidity The measured relative humidity in % of the device.
    pm25 The air pollution in PM2.5.
    filterLifeRemaining The remaining filter life in hours.
    filterHoursUsed The used hours of the filter.

    Changelog

    0.1.8 (02.05.2020)

    • (JoJ123) bug: npm install

    0.1.7 (01.05.2020)

    • (JoJ123) bug: interval load data

    0.1.6 (01.05.2020)

    • (JoJ123) support for 'zhimi.airpurifier.mc1'

    0.1.5 (01.05.2020)

    • (JoJ123) add new parameter

    0.1.4 (01.05.2020)

    • (JoJ123) bug fixing

    0.1.1 (18.04.2020)

    • (JoJ123) move to typescript

    0.0.6 (09.04.2019)

    • (JoJ123) update miio to fork of Sineos

    0.0.5 (06.01.2019)

    • (JoJ123) update natives

    0.0.4 (02.01.2019)

    • (JoJ123) update type

    0.0.3 (18.12.2018)

    • (JoJ123) npm release

    0.0.2 (29.11.2018)

    • (JoJ123) auto reconnect

    0.0.1 (10.10.2018)

    • (JoJ123) initial release

    License

    The MIT License (MIT)

    Copyright (c) 2019 Johannes Jaeger johannesjaegeroffice@gmail.com

    Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

    Copyright (c) 2020 Johannes Jaeger johannesjaegeroffice@gmail.com

    Install

    npm i iobroker.mihome-airpurifier

    DownloadsWeekly Downloads

    6

    Version

    0.1.8

    License

    MIT

    Unpacked Size

    57.1 kB

    Total Files

    15

    Last publish

    Collaborators

    • bluefox
    • joj123