iobroker.mielecloudservice

    6.3.1 • Public • Published

    Logo

    ioBroker.mielecloudservice

    Number of Installations Number of Installations NPM version Known Vulnerabilities Test and Release License Downloads NPM

    mielecloudservice adapter for ioBroker

    Get your Miele appliances (XGW3000 & WiFiConn@ct) connected

    If you like this adapter and consider supporting me:
    Donate with PayPal

    Description

    This adapter is for retrieving information about all your Miele@Home devices from the official Miele 3rd-party API. Regardless if they are connected directly via Wi-Fi or XGW3000 Gateway. It implements the Miele 3rd Party API V1.0.5

    Prerequisites

    Installation

    To install, do the following:

    1. Install via Admin using the
    1. create an App-Account for Miele@Home in the Miele Smartphone App
    2. Create a developer account at https://www.miele.com/f/com/en/register_api.aspx
    3. Add your Miele-Devices to the App (if not added automatically)
    4. Fill in the client_secret and client_id received from Miele-developer Team and account-id and password from the App.

    Configuration

    Basic config

    To get this adapter running you'll need at least:

    Server-Sent Events

    Since V6.2.0 you have the opportunity to chose between

    • Server-Sent Events (Server-Sent Events Checkbox is checked - default)
    • Time based Data-Polling (Server-Sent Events Checkbox is unchecked)

    Server-Sent Events are a very neat method to get data from the miele servers since the servers will send you data whenever there are changes. No useless polling every xx seconds ignoring whether there were changes or not. Unfortunately there are issues using this connection type - it fails pretty often and only restarting the adapter solves this. To improve stability of the adapter I reintroduced data polling as a config option you may use when SSE fails four you. Nevertheless SSE is the default, and I highly recommend trying and using it since it saves many resources on your and on Mieles side. Beside of that I focus on SSE since Version 5.x.x.

    Controlling your devices

    Actions

    All currently supported and documented Actions for all devices are implemented (API V1.0.5).

    Please remember that Actions will only work if you put your device into the appropriate state (e.g. Mobile Control, powerOn, ...). Please refer to Miele-Documentation for more Information on actions.

    Programs (Introduced in API V1.0.5)

    With API V1.0.5 Miele introduced a new endpoint called "/programs". The support for this endpoint starts with adapter version 4.5.0. A new datapoint [device.Actions.Program] will be created listing all supported programs as returned by Miele. Selecting one of the values will execute the program immediately! Currently, only simple programs are supported. E.g. Ovens need some additional information - this will be implemented in a future version.

    When publishing the adapter Miele documented a few device categories to support this endpoint and only (at least for me) a subset of these really work. For my coffee system, washing machine and tumble dryer it only works for the coffee system. But Miele is working on it and extends the support on a regular basis. Please refer to the general Miele API documentation (below) for more information.

    Known Issues

    • There is a new endpoint inside the Miele API since V1.05 of the API (/programs).
      • It`s currently unknown how to use them since the API documentation is ... improvable.
      • These programs are basically supported since v6.0.0 of the adapter. Except programs that need additional parameters.

    Documentation

    Please mainly refer to the main API documentation published by Miele

    There are some data points available in 2 kinds. As a human-readable text and as a number. These numeric data fields belonging to a text field have the same name, but a "_raw" appended. Those fields which have a general meaning are listed below. The fields which aren't listed vary in their meaning from device to device and are not documented by Miele. If you need to refer in scripts to these fields, always use the _raw values. The text values may change in the future and also depend on the language. Here is a list of what these raw values stand for:

    DeviceTypes

    Raw value State
    1 WASHING MACHINE
    2 TUMBLE DRYER
    7 DISHWASHER
    8 DISHWASHER SEMI-PROF
    12 OVEN
    13 OVEN MICROWAVE
    14 HOB HIGHLIGHT
    15 STEAM OVEN
    16 MICROWAVE
    17 COFFEE SYSTEM
    18 HOOD
    19 FRIDGE
    20 FREEZER
    21 FRIDGE-/FREEZER COMBINATION
    23 VACUUM CLEANER, AUTOMATIC ROBOTIC VACUUM CLEANER
    24 WASHER DRYER
    25 DISH WARMER
    27 HOB INDUCTION
    28 HOB GAS
    31 STEAM OVEN COMBINATION
    32 WINE CABINET
    33 WINE CONDITIONING UNIT
    34 WINE STORAGE CONDITIONING UNIT
    39 DOUBLE OVEN
    40 DOUBLE STEAM OVEN
    41 DOUBLE STEAM OVEN COMBINATION
    42 DOUBLE MICROWAVE
    43 DOUBLE MICROWAVE OVEN
    45 STEAM OVEN MICROWAVE COMBINATION
    48 VACUUM DRAWER
    67 DIALOGOVEN
    68 WINE CABINET FREEZER COMBINATION

    State/Status

    Raw value State
    1 OFF
    2 STAND_BY
    3 PROGRAMMED
    4 PROGRAMMED_WAITING_TO_START
    5 RUNNING
    6 PAUSE
    7 END_PROGRAMMED
    8 FAILURE
    9 PROGRAMME_INTERRUPTED
    10 IDLE
    11 RINSE_HOLD
    12 SERVICE
    13 SUPERFREEZING
    14 SUPERCOOLING
    15 SUPERHEATING
    144 DEFAULT
    145 LOCKED
    146 SUPERCOOLING_SUPERFREEZING
    255 Device offline

    ProgramType/Programmart

    Raw value State
    0 Normal operation mode
    1 Own program
    2 Automatic program
    3 Cleaning-/Care program

    dryingStep/Trockenstufe

    Raw value State
    0 Extra dry
    1 Normal Plus
    2 Normal
    3 Slightly Dry
    4 Hand iron level 1
    5 Hand iron level 2
    6 Machine iron

    Programmbezeichnung

    Raw value State available for
    1 "Baumwolle" / "Cotton" Washing Machine
    3 "Pflegeleicht" Washing Machine
    4 "Feinwäsche" Washing Machine
    8 "Wolle" Washing Machine
    9 "Seide" Washing Machine
    21 "Pumpen/Schleudern" Washing Machine
    23 "Oberhemden" Washing Machine
    27 "Imprägnieren" Washing Machine
    29 "Sportwäsche" Washing Machine
    31 "Automatic plus" Washing Machine
    37 "Outdoor" Washing Machine
    48 "Flusen ausspülen" Washer Dryer
    50 "Dunkle Wäsche" Washer Dryer
    52 "Nur Spülen/Stärken" Washing Machine
    122 "Express 20" Washer Dryer
    123 "Dunkles/Jeans" Washing Machine

    ProgramPhase

    Raw value State available for
    258 "Einweichen" Washing Machine
    260 "Waschen" / "Washing" Washing Machine
    261 "Spülen" / "Rinse" Washing Machine
    265 "Pumpen" Washing Machine
    266 "Schleudern" / "Spinning" Washing Machine
    267 "Knitterschutz" / "" Washing Machine
    268 "Ende" / "End" Washing Machine
    256 "Vorbügeln" Washing Machine
    512 "Ende" / "Finished" Tumble dryers
    514 "Trocknen" / "Drying" Washer Dryer, Tumble dryers
    519 "Abkühlen" / "Cool down" Washer Dryer
    521 "Knitterschutz" / "" Tumble dryer
    522 "Ende" / "Finished" Tumble dryer
    531 "Komfortkühlen" Tumble Dryer
    532 "Flusen ausspülen" Washer Dryer

    Changelog

    WORK IN PROGRESS

    V6.3.1 (2022-05-25) (Black Wings)

    • (grizzelbee) Fix: Fixed bad log entry for error delay (delay is logged bad - but is executed okay)
    • (grizzelbee) Chg: Improved connection error handling
    • (grizzelbee) Fix: Fixed Sentry error: MIELECLOUDSERVICE-3K

    V6.3.0 (2022-05-23) (Black Wings)

    • (grizzelbee) New: 247 Added a User-Agent to http-requests to enable Miele to identify requests made by this adapter
    • (grizzelbee) New: 248 Added exponential backoff in case of errors
    • (grizzelbee) Fix: 249 Handling undefined devices properly when executing actions
    • (grizzelbee) Fix: 250 Fixed light switch action which did not work due to 228
    • (grizzelbee) Fix: 246 switched http response from warn to debug
    • (grizzelbee) Chg: Some minor log improvements

    V6.2.2 (2022-05-17) (Black Wings)

    • (grizzelbee) Fix: Starting programs on devices is working now.

    V6.2.1 (2022-05-16) (Black Wings)

    • (grizzelbee) Fix: 242 VentilationStep needs to be type number but was boolean
    • (grizzelbee) Fix: ACTIONS.programId is invalid: obj.common.type has an invalid value (integer) ...

    V6.2.0 (2022-05-12) (Black Wings)

    • (grizzelbee) New: 238 Reintroduced data polling as a config option for all who has troubles with Server-Sent Events
    • (grizzelbee) New: Added some additional error handling code when Server Send Events report errors.
    • (grizzelbee) New: 238 Added reconnect delay in case od an error
    • (grizzelbee) New: 192 Improved handling of adapter traffic light in case of an error
    • (grizzelbee) New: Waiting for code to complete in case of an occurring event
    • (grizzelbee) Chg: Changed watchdog log entry from info to debug

    V6.1.5 (2022-05-05) (Black Wings)

    • (grizzelbee) Fix: Changed State-Changed log entry from info to debug
    • (grizzelbee) Fix: Fixed issue with not initialized auth.ping variable on adapter startup
    • (grizzelbee) Fix: Fixed issue with not initialized auth.ping variable after token has been refreshed
    • (grizzelbee) Fix: Fixed error in auth expiry calculation

    V6.1.4 (2022-05-03) (Black Wings)

    • (grizzelbee) Fix: 233 Fixed error while setting targetTemperature

    V6.1.3 (2022-05-02) (Black Wings)

    • (grizzelbee) Fix: 225 Fixes error with cooling devices
    • (grizzelbee) Fix: 231 Fixes startup loop when cooling devices are connected
    • (grizzelbee) Fix: Fixed SuperCooling switch
    • (grizzelbee) Fix: Fixed SuperFreezing switch
    • (grizzelbee) New: Added code to run dry tests with local test data

    V6.1.2 (2022-04-29) (Black Wings)

    • (grizzelbee) Fix: 228 Inverted light switch
    • (grizzelbee) Chg: Moved main.js back to the main folder to run unit tests

    V6.1.1 (2022-04-28) (Black Wings)

    • (grizzelbee) Fix: added some missing native parts in objects
    • (grizzelbee) Chg: Moved main.js to the source folder

    V6.1.0 (2022-04-27) (Black Wings)

    • (grizzelbee) Fix: Added some error handling
    • (grizzelbee) Chg: Changed PlateStep_x data structure to PlateStepZone-x
    • (grizzelbee) Chg: Removed unused ambientLight function
    • (grizzelbee) Chg: 225 Removed unused freezerZone code for knownDevices

    V6.0.0 (2022-04-19) (Black Wings)

    • (grizzelbee) New: Adapter entirely rewritten from scratch
    • (grizzelbee) New: Added link to request Miele API credentials in config page.
    • (grizzelbee) New: Implemented watchdog for broken lines
    • (grizzelbee) New: Added donate button to config page and readme file
    • (grizzelbee) New: 216 Added additional (undocumented) data points to dish warmer
    • (grizzelbee) Fix: 213 Login delay works properly now when login fails on Startup
    • (grizzelbee) Fix: 207 powering on device due to querying available programs
    • (grizzelbee) Fix: Refresh of expired tokens works properly now
    • (grizzelbee) Fix: Light-Switch is working now e.g. for coffee systems
    • (grizzelbee) Chg: BREAKING CHANGE: Changed IDs for targetTemperature and temperature
    • (grizzelbee) Chg: targetTemperature and temperature with invalid values (-32768, null, ...) will no longer be created
    • (grizzelbee) Chg: startTime has moved to ACTIONS and is intended to work properly
    • (grizzelbee) Chg: ACTIONS.*_Button_Active data points have been removed
    • (grizzelbee) Chg: Switches in the ACTIONS are simple boolean switches now (no on/off, ...)
    • (grizzelbee) Upd: dependencies got updated
    • (grizzelbee) Upd: removed separate license file

    V5.0.4 (2022-01-07) (Invincible)

    V5.0.3 (2021-12-31) (Invincible)

    • (grizzelbee) Fix: MIELECLOUDSERVICE-8 fixed stringifying circular structure
    • (grizzelbee) Fix: undefined is not a valid state value for id "xxx.signalDoor"
    • (grizzelbee) Fix: undefined is not a valid state value for id "xxx.ACTIONS.programId"

    V5.0.2 (2021-10-27) (Invincible)

    • (grizzelbee) Upd: Added listener to error events
    • (grizzelbee) Upd: Trying to reconnect if connection has been lost

    V5.0.1 (2021-10-25) (Invincible)

    • (grizzelbee) Fix: 178 Removed: info Received ACTIONS message by SSE.
    • (grizzelbee) Fix: 179 Removed: info Received DEVICES message by SSE.
    • (grizzelbee) Fix: 180 Fixed: Info: State value to set for "mielecloudservice.0.xxx.ACTIONS.Power" has to be type "boolean" but received type "string"
    • (grizzelbee) Fix: 181 Fixed: Program buttons should be fixed and work as soon as Miele fixes the API (as of today it has bugs).
    • (grizzelbee) Upd: Removed many debug log output

    V5.0.0 (2021-10-21) (Invincible)

    • (grizzelbee) Chg: BREAKING CHANGE: Removed useless grouping folders for device types - check your VIS and scripts
    • (grizzelbee) New: 164 fixed bug in SignalFailure and signalInfo when havin no value
    • (grizzelbee) New: 155 fixed >missing object< bug on arrays
    • (grizzelbee) New: 154 Reintroduced TargetTemp to washer dryers
    • (grizzelbee) New: 140 Switched from data polling to server sent events (push data)
    • (grizzelbee) New: 71 If there is no internet connection on startup retry connecting until connection is established
    • (grizzelbee) Fix: estimatedEndTime won't be shown anymore when device is off
    • (grizzelbee) Fix: Don't rethrowing errors in APISendRequest anymore
    • (grizzelbee) Fix: fixed a few minor bugs
    • (grizzelbee) Upd: Updated dependencies
    • (grizzelbee) New: Added some additional API languages newly supported by Miele
    • (grizzelbee) New: Added support for Miele API V1.0.5
    • (grizzelbee) New: Added correct tier of adapter to io-package
    • (grizzelbee) New: Added more program phases for tumble dryers to documentation
    • (grizzelbee) Fix: Switched type of Power-Switch from string to boolean for being compliant with ioBroker expectation (e.g. for Text2Command adapter) - maybe more to follow. Please delete the data point let it create newly.
    • (germanBluefox) Fix: Fixed icon link

    V4.2.0 (2021-05-17) (A new Dimension)

    • (grizzelbee) New: Adding Pause action to dish-washers

    V4.1.0 (2021-05-15) (Carry me over)

    • (grizzelbee) New: 149 Adding support (Start, Stop, Pause) for Miele Scout RX2 vacuum cleaner robots
    • (Stan23) New: Added new program phase soak/Einweichen

    V4.0.22 (2021-05-06) (Twisted mind)

    • (grizzelbee) Fix: 142 Reintroduced TargetTemp for washing machines

    V4.0.21 (2021-05-03) (The Edge)

    • (grizzelbee) Fix: Fixed accidental function name: createStateSpinAPIStartActionningSpeed
    • (grizzelbee) Fix: Fixed State value to set for "*.PlateStep_1" has to be type "number" but received type "string"

    V4.0.20 (2021-04-30) (Sleepwalkers)

    • (grizzelbee) Fix: 137 Fixed Read-only state "info.connection" has been written without ack-flag with value "false"
    • (grizzelbee) Fix: 138 Fixed State value to set for ".Schleuderdrehzahl" has wrong type "string" but has to be "number"
    • (grizzelbee) Fix: 139 Fixed State value to set for ".ACTIONS.Light" has wrong type "number" but has to be "string"
    • (grizzelbee) Upd: Changed device group from channel to folder as documented here

    V4.0.19 (2021-04-29) (The scarecrow)

    • (grizzelbee) Fix: Fixed light switch bug causing an exception when switching - 2nd attempt
    • (grizzelbee) Fix: Fixed No-Icon Bug when appliance is unknown

    V4.0.18 (2021-04-28) (Ghostlights)

    • (grizzelbee) Fix: Fixed light switch bug causing an exception when switching

    V4.0.17 (2021-04-27) (Ghost in the moon)

    • (grizzelbee) New: Added ioBroker sentry plugin to report issues automatically
    • (grizzelbee) New: Added Light-Switch to washing machines, Tumble Dryers, Washer dryers and Dish washers
    • (grizzelbee) Upd: Updated dependencies

    Hint: The behavior of the light-switch has slightly changed with this release. It not only tests the action capabilities of the device but also shows the state of the light state delivered by the API. If no actions are reported by the API, the switch will be without function and only show the current state. If actions have been reported the switch will work as you expect. If your device reports no light state and no actions the switch will show 'None' and won't do anything.

    V4.0.16 (2021-04-21) (Black Orchid)

    • (grizzelbee) Fix: Units for EcoFeedback will be shown now, even machine is not running during setup
    • (stan23) New: added new program states

    V4.0.15 (2021-04-19) (Moonglow)

    • (grizzelbee) Fix: 130 targetTemp for fridges and freezers will now correctly been updated in action section with current values

    V4.0.14 (2021-04-18) (Alchemy)

    • (grizzelbee) Fix: 127 targetTemp for fridges caused exception and crash of adapter

    V4.0.13 (2021-04-12) (The toy master)

    • (grizzelbee) Fix: 90 targetTemp addresses zones for fridges and freezers dynamically now

    V4.0.12 (2021-04-12) (Promised land)

    • (grizzelbee) Fix: 90 targetTemp addresses zones for fridges and freezers dynamically now

    V4.0.11 (2021-04-11) (Cry just a little)

    • (grizzelbee) Fix: targetTemp min and max values are now taken from API - no constant values anymore

    V4.0.10 (2021-04-10) (Another angel down)

    • (grizzelbee) Fix: targetTemp min and max values are now taken from API - no constant values anymore

    V4.0.9 (2021-04-09) (Farewell)

    • (grizzelbee) Fix: Errors during action execution will be shown correctly
    • (grizzelbee) Fix: Actions will be executed correctly

    V4.0.8 (2021-04-09) (The seven angels)

    • (grizzelbee) Fix: fixed datatype of VentilationStep data point
    • (grizzelbee) Fix: fixed ventilation step switch for hoods (attempt 4)

    V4.0.7 (2021-04-09) (Lost in space)

    • (grizzelbee) Fix: 90 added missing path to object ID; data point will be created in the correct place now
    • (grizzelbee) New: targetTemp min and max values are now taken from API - no constant values anymore

    V4.0.6 (2021-04-08) (The great mystery)

    • (grizzelbee) Fix: fixes Light switch for hoods and other devices supporting light
    • (grizzelbee) Fix: fixes ventilation step switch for hoods (attempt 3)

    V4.0.5 (2021-04-08) (The haunting)

    • (grizzelbee) Fix: fixes ventilation step switch for hoods (attempt 2)
    • (grizzelbee) Fix: fixes error on creating TargetTemperature data points

    V4.0.4 (2021-04-07) (Wastelands)

    • (grizzelbee) Fix: fixes ventilation step switch for hoods
    • (grizzelbee) Fix: fixed missing getLightState

    V4.0.3 (2021-04-07) (The raven child)

    • (grizzelbee) Fix: 109 fixes 404 error when querying possible actions for device.
    • (grizzelbee) Fix: fixes errors when executing actions on devices with API-Id!=fabNumber

    V4.0.2 (2021-04-07) (Angel of Babylon)

    • (grizzelbee) Fix: 107 fixes #107 and 404 error when device is unknown.

    V4.0.1 (2021-04-06) (Sign of the cross)

    • (grizzelbee) Fix: 90 setting the targetTemperature should work now.
    • (grizzelbee) Fix: 96 Added missing ACTIONS.Action_Information again
    • (grizzelbee) Fix: 97 removed unneeded additional "VentilationStep/Lüfterstufe" in path and fixed warning with this. VentilationStep-switch should work properly now.
    • (grizzelbee) Fix: 98 Color-Action has now valid type 'String'
    • (grizzelbee) Fix: 102 Fixed ACTIONS.VentilationStep has no existing object
    • (grizzelbee) Fix: Power switch is write protected now when in state 'None'. State 'None' means: No action permitted.
    • (grizzelbee) Fix: Light switch is write protected now when in state 'None'. State 'None' means: No action permitted.
    • (grizzelbee) Fix: http error 404 will be catched when requesting device actions

    V4.0.0 (2021-03-18) (Symphony of life)

    Hint: The adapter received a complete code refactoring! This means that most of the code has been changed and some parts are working now differently than ever before. Update with care and read the change log!

    • (grizzelbee) New: FULL support of Miele cloud API v1.0.4
    • (grizzelbee) Upd: 83 estimatedEndTime isn't shown anymore after the device has finished
    • (grizzelbee) Upd: 85 full code refactoring and split into multiple files.
    • (grizzelbee) Upd: 86 every folder and device now gets a nice little icon
    • (grizzelbee) Upd: 89 Washer dryers are fully supported now
    • (grizzelbee) Upd: 90 implemented targetTemperature for fridges & freezers
    • (grizzelbee) Upd: Devices get fully created on startup and aren't modified afterwards - only updated
    • (grizzelbee) Upd: New folder ecoFeedback to group ecoFeedback states
    • (grizzelbee) Upd: New folder IDENT to group ident states
    • (grizzelbee) Upd: Removed signalActionRequired - since there is no signalDoor for washing machines, dryers and dishwashers this approach doesn't work
    • (grizzelbee) Upd: All folders and states which are being created depend on the capabilities of their devices as described in this Miele documentation. So there shouldn't be useless states anymore caused by the generic Miele cloud API.

    V3.0.2 (2021-03-05)

    • (grizzelbee) Fix: 79 When a devices serial is missing, the identNumber is assigned instead.
    • (grizzelbee) Upd: Changed folder name cooktops to hobs since this is the more common name
    • (grizzelbee) Upd: added PowerOn/Off buttons for Coffee-systems & hoods
    • (grizzelbee) Upd: 74 testing actions better before sending to permit errors

    V3.0.1 (2021-02-25)

    Hint: Action_Information and Action_Status objects are created on first action execution and contain infos to the last executed action. Please take care of notes regarding [Controlling your devices](#Controlling your devices).

    • (grizzelbee) Upd: Improved logging in some parts - objects get stringified.
    • (grizzelbee) Fix: 74 Actions are working again
    • (grizzelbee) Upd: Actions are tested before sending whether they are permitted in current device state
    • (grizzelbee) Upd: estimatedEndTime doesn't show seconds anymore
    • (grizzelbee) Upd: Improved documentation
    • (grizzelbee) Upd: removed unused function decrypt
    • (grizzelbee) Upd: removed superfluent parameters

    V3.0.0 (2021-02-18)

    Hint: ecoFeedback objects are created on the first run of the device. This allows to only create them, when they contain data.

    • (grizzelbee) New: BREAKING CHANGE: Making use of build-in password de-/encryption. This raises the need to re-enter your passwords again, because the old ones can't be decrypted anymore.
    • (grizzelbee) New: 70 Implements Miele API 1.0.4
    • (grizzelbee) New: 64 Introduces data point estimatedFinishingTime
    • (grizzelbee) New: 54 Poll interval can now freely be selected in seconds and minutes
    • (grizzelbee) Upd: 73 BREAKING CHANGE: Removed white-spaces from any ID in device tree. This creates completely new device trees. So please delete the old ones.
    • (grizzelbee) Upd: removed david-dm badge
    • (grizzelbee) Upd: updated dependencies
    • (grizzelbee) Fix: added passwords to encryptedNative
    • (grizzelbee) Fix: added passwords to protectedNative
    • (grizzelbee) Fix: 63 added missing info.connection object to io-package
    • (grizzelbee) Fix: 63 Fixed new Warnings introduced with js-controller 3.2
    • (grizzelbee) Fix: 74 Light-Actions should work now

    V2.0.3 (2020-09-15)

    • (grizzelbee) Upd: Updated country list in config dialog
    • (grizzelbee) New: Some more debug code

    V2.0.2 (2020-09-15)

    • (grizzelbee) New: Added some debug Code to find an Error
    • (grizzelbee) Fix: fixed error on failed authentication preventing a valid error message

    V2.0.1 (2020-09-14)

    • (grizzelbee) New: Added some debug Code to find an Error
    • (grizzelbee) Fix: fixed error on logout while invalidating token

    V2.0.0 - Support for Miele API V1.0.3 (2020-08-25)

    Some breaking changes in this release. Some data points changed their type. May require fixes in scripts. Update with care! Due to the fix that data points with invalid values aren't created any longer, I recommend deleting all data points in Object view.

    • (grizzelbee) Change: New Icon
    • (grizzelbee) Fix: Number-data points are no longer created as strings due to their unit. They are correct numbers with units now.
    • (grizzelbee) Fix: Unit °Celsius is now shown as °C - not longer °Celsius
    • (grizzelbee) New: Introduced support for °Fahrenheit
    • (grizzelbee) New: Introduced support for new Value "plateStep" for Hobs.
    • (grizzelbee) New: Performing a LogOut from Miele API on shutdown to invalidate the Auth-Tokens.
    • (grizzelbee) Fix: Data points with invalid values (null/-32768) are no longer created.

    V1.2.4 (2020-06-09)

    • (grizzelbee) Fix: fixed No-Data Bug (introduced in V1.2.3)

    V1.2.3 (2020-06-07)

    • (grizzelbee) Upd: fixed snyk badge
    • (grizzelbee) Upd: Improved error handling

    V1.2.2 (2020-05-23)

    • (grizzelbee) Upd: removed node 8 from testing on travis.com
    • (grizzelbee) Fix: signalActionRequired should work better now
    • (grizzelbee) Upd: Updated documentation
    • (grizzelbee) Upd: Improved error handling in function APISendRequest
    • (grizzelbee) Fix: Moved testing of Config to On(Ready) and fixed unit tests with this.

    V1.2.1 (2020-04-22)

    • (grizzelbee) New: Introduced new boolean state (signalActionRequired) that indicates that the machine has finished running, but a human action, like putting the wet clothes to the dryer, ... is needed. State is cleared automatically when the door of the appliance is opened, or it is restarted. State is implemented for washing machines, tumble dryers, washer dryer and dishwashers. Doesn't work perfectly currently.
    • (grizzelbee) Upd: Updated Documentation
    • (grizzelbee) Fix: Fixed warnings with js-Controller >=3.0 (Issue #23)

    V1.2.0 (2020-04-18)

    • (grizzelbee) New: Added new boolean state (Connected) that indicates whether the device is connected to WLAN or a gateway.
    • (grizzelbee) New: Added new boolean state (signalInUse) that indicates whether the device is switched off (false) or in Use (true).
    • (grizzelbee) Change: replaced the deprecated http-library request with axios
    • (grizzelbee) Change: Made functions communicating with API asynchronous

    V1.1.0 (2020-03-07)

    • (grizzelbee) New: Added Actions - Implemented all currently supported and documented Actions for all devices.

    Please remember that Actions will only work if you put your device into the appropriate state (e.g. Mobile Control) please refer to Miele-Documentation for more Information on actions.

    V1.0.5 (2020-02-14)

    • (grizzelbee) removed node-schedule as a dependency
    • (grizzelbee) implemented scheduling via setTimeout, which raises the opportunity to schedule with less than a minute in the future

    V1.0.4 (2020-02-12)

    • (grizzelbee) removed unneeded setTimeout from main
    • (grizzelbee) Clearing scheduler on unload of adapter
    • (grizzelbee) Minor updates and fixed typos in Readme

    V1.0.3 (2020-02-06)

    • (grizzelbee) removed an overseen logging of Passwords
    • (grizzelbee) Fixed createTemperatureDatapoint to work with less than 3 values delivered from API
    • (grizzelbee) Added some documentation
    • (grizzelbee) Started implementation of DeviceActions

    V1.0.2 (2020-02-05)

    • (grizzelbee) removed any logging of Passwords
    • (grizzelbee) Fixed bug in config interface introduced during password encryption that config values aren't loaded properly

    V1.0.1 (2020-02-04)

    • (grizzelbee) Fixes in environment for getting adapter into the Repo
    • (grizzelbee) Passwords are stored encrypted now

    V1.0.0 (2020-02-03)

    • (grizzelbee) renamed to MieleCloudService to get the ability to publish; the old Name is still blocked by hash99
    • (grizzelbee) Rewritten adapter from scratch - therefore it's incompatible with prior versions and needs to be installed freshly.
    • (grizzelbee) Fix: fixed all build-errors
    • (grizzelbee) Fix: Fixed "NRefreshToken is not a function"-Bug
    • (grizzelbee) Chg: removed Push-API checkbox (maybe introduced newly when API supports this)
    • (grizzelbee) Chg: New Icon
    • (grizzelbee) New: added support for non-german Miele-Accounts (ALL should be included)
    • (grizzelbee) Complete new layout of data points
    • (grizzelbee) Device types are grouped now

    0.9.1 (2019-07-26)

    • (grizzelbee) Fix: Fixed small bug introduced in V0.9.0 throwing an exception in debugging code

    0.9.0 (2019-07-26)

    • (grizzelbee) Upd: New versioning due to completeness and stability of the adapter (about 90%)
    • (grizzelbee) New: make poll interval configurable (currently 1,2,3,4,5,7,10,15 Minutes)
    • (grizzelbee) Fix: fixed ESLint config
    • (grizzelbee) Upd: Changed order of config fields in UI
    • (grizzelbee) New: Set 5 Minutes poll interval and english response language as default to get initial values
    • (grizzelbee) New: Parent-Datapoint of time values will be used to get a pretty readable time in the format h:mm. The deeper datapoints 0 and 1 will still be updated, but his will be removed in a future version to reduce workload.

    0.0.5 (2019-07-25)

    • (grizzelbee) Upd: some code maintenance
    • (grizzelbee) New: added reply-language to config
      • Miele API is currently able to reply in German or English, now you can choose.
    • (grizzelbee) New: created new Icon
    • (grizzelbee) Fix: fixed translation issues and translated adapter UI using gulp
    • (grizzelbee) Upd: Made changes to travis requested by apollon77

    0.0.4

    • (hash99) add devices configuration

    0.0.3

    • (hash99) adapter conform

    0.0.1

    • (hash99) initial release

    sentry.io

    This adapter uses sentry.io to collect details on crashes and report it automated to the author. The ioBroker.sentry plugin is used for it. Please refer to the plugin homepage for detailed information on what the plugin does, which information is collected and how to disable it, if you don't like to support the author with your information on crashes.

    License

    The MIT License (MIT)

    Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

    Copyright

    Copyright (c) 2019-2022 grizzelbee open.source@hingsen.de

    Install

    npm i iobroker.mielecloudservice

    DownloadsWeekly Downloads

    540

    Version

    6.3.1

    License

    MIT

    Unpacked Size

    439 kB

    Total Files

    61

    Last publish

    Collaborators

    • bluefox
    • apollon77
    • grizzelbee