Natty Precise Maverick

    iobroker.jeelink

    0.1.4 • Public • Published

    Logo

    ioBroker.jeelink

    Number of Installations Number of Installations NPM version Downloads Build Status

    NPM

    This is an adapter for ioBroker to integrate RFM12B/RFM69 via Jeelink. The jeelink can be used with the preloaded software (rfmdemo) for the reading of openenergy sensors (emon). For the usage of LaCrosse sensors, the firmware has to be exchanged (see iobroker forum).

    Installation:

    released version

    npm install iobroker.jeelink

    on raspberry it might help to use:

     npm install --unsafe-perm iobroker.jeelink

    because serialport package must be built on unsupported arm-hw

    the actual development version from github (when under testing, may not work!)

    npm install https://github.com/foxthefox/ioBroker.jeelink/tarball/master --production

    or

    npm install --unsafe-perm https://github.com/foxthefox/ioBroker.jeelink/tarball/master --production

    Settings:

    • USB port of JeelinkAdapter usually /dev/ttyACME
    • Serial Speed usually 57600 Baud

    Configuration:

    to be done in admin

    • deinition of the USB port
    • setting the baudrate
    • define sensor address which is received on air
    • define unique sensors address within adapter (LaCrosse changes the on air address after battery change, so observe the log and adjust the sensor address after battery change)
    • define the type of sensor (see belows examples)
    • define the room

    Sensors

    Object device variants telegram example Description
    emonTH emonTH OK 19 ... sensor from openenergy.org
    emonWater emonWater OK 21 ... sensor with RFM12B for water metering
    LaCrosseDTH TX OK 9 ... sensors from LaCrosse, technoline
    LaCrosseDTT TX OK 9 ... sensors from LaCrosse, technoline double temp
    HMS100TF TXH29DTH-IT H00 ... sensors technoline
    LaCrosseBMP180 OK WS ... sensor mod, superjee
    LaCrosseWS WS1080,TX22,WS1600 OK WS ... Weather Station
    EC3000 EC3000 OK 22 ... Energy Meter
    EMT7110 EMT7110 OK EMT7110 ... Energy Meter
    level level OK LS ... level sensor

    TODO:

    • other sensor types
    • put the sensor code in separate file
    • pushing new sensor to config, then visible in admin/config page
    • HMS100TF Temp below 0°C and battery low to be implemented

    Changelog:

    0.1.4

    • (o0shojo0o) nodejsV14 compatibility

    0.1.3

    • (atl285) added new sensor type LacCrosseDTT (double temp like TX25-IT)

    0.1.2

    • correction for weather (no data is given by value = 255)

    0.1.1

    • delete buffer function to be compatible with nodejs10
    • enhanced automatic testing

    0.1.0

    • compact mode

    0.0.7

    • new level sensor (fhem)

    0.0.6

    • last version of serialport
    • new sensor TXH29DTH-IT
    • new weather station WS1600
    • new sensor EC3000, EMT7110 not verified with life data

    0.0.5

    • adminv3 improved with values2table

    0.0.4

    • command to USB-stick for configuration
    • added superjee, BMP180 sensor on jeenode
    • admin v3 implementation

    0.0.3

    • abs humidity and dewpoint calculation

    0.0.2

    • definition of unique sensor ID for iobroker datapoint
    • implementation of LaCrosseDTH
    • definition of sensors via admin

    0.0.1

    • working with 3 sensors emon

    License

    The MIT License (MIT)

    Copyright (c) 2018 - 2020 foxthefox foxthefox@wysiwis.net

    Install

    npm i iobroker.jeelink

    DownloadsWeekly Downloads

    52

    Version

    0.1.4

    License

    MIT

    Unpacked Size

    120 kB

    Total Files

    16

    Last publish

    Collaborators

    • bluefox
    • foxthefox