i2c-bus, but /dev/i2c-1 is hardcoded

No more changed.

I2C serial bus access with Node.js on Linux boards like the Raspberry Pi, C.H.I.P., BeagleBone or Intel Edison. All methods have asynchronous and synchronous forms.

i2c-bus supports Node.js versions 4, 6, 8, 10 and 12.

Installation
Usage
API

Installation

npm install i2c-bus

The way in which I2C is configured varies from board to board. Sometimes no configuraton is required, but sometimes it is:

Configuring I2C on the Raspberry Pi
Configuring Software I2C on the Raspberry Pi
- Consider software I2C when there are issues communicating with a device on a Raspberry Pi
Configuring I2C on the Intel Edison Arduino Base Board

Usage

Example Temperature Sensor Circuits

Some of the examples programs use a DS1621 temperature sensor to show how the i2c-bus package functions.

DS1621 temperature sensor connected to a Raspberry Pi

DS1621 temperature sensor connected to a BeagleBone Black

Example 1 - Determine Temperature Synchronously

Determine the temperature with a DS1621 temperature sensor Synchronously.

const i2c = require('i2c-bus');

const DS1621_ADDR = 0x48;
const CMD_ACCESS_CONFIG = 0xac;
const CMD_READ_TEMP = 0xaa;
const CMD_START_CONVERT = 0xee;

const toCelsius = (rawTemp) => {
  const halfDegrees = ((rawTemp & 0xff) << 1) + (rawTemp >> 15);

  if ((halfDegrees & 0x100) === 0) {
    return halfDegrees / 2; // Temp +ve
  }

  return -((~halfDegrees & 0xff) / 2); // Temp -ve
};

const displayTemperature = () => {
  const i2c1 = i2c.openSync(1);

  // Enter one shot mode (this is a non volatile setting)
  i2c1.writeByteSync(DS1621_ADDR, CMD_ACCESS_CONFIG, 0x01);

  // Wait while non volatile memory busy
  while (i2c1.readByteSync(DS1621_ADDR, CMD_ACCESS_CONFIG) & 0x10) {
  }

  // Start temperature conversion
  i2c1.sendByteSync(DS1621_ADDR, CMD_START_CONVERT);

  // Wait for temperature conversion to complete
  while ((i2c1.readByteSync(DS1621_ADDR, CMD_ACCESS_CONFIG) & 0x80) === 0) {
  }

  // Display temperature
  const rawTemp = i2c1.readWordSync(DS1621_ADDR, CMD_READ_TEMP);
  console.log('temp: ' + toCelsius(rawTemp));

  i2c1.closeSync();
};

displayTemperature();

Example 2 - Determine Temperature Asynchronously

Determine the temperature with a DS1621 temperature sensor Asynchronously. Example 2 does exactly the same thing as example 1, but uses the asynchronous rather than the synchronous API.

const async = require('async');
const i2c = require('i2c-bus');

const DS1621_ADDR = 0x48;
const CMD_ACCESS_CONFIG = 0xac;
const CMD_READ_TEMP = 0xaa;
const CMD_START_CONVERT = 0xee;

const toCelsius = (rawTemp) => {
  const halfDegrees = ((rawTemp & 0xff) << 1) + (rawTemp >> 15);

  if ((halfDegrees & 0x100) === 0) {
    return halfDegrees / 2; // Temp +ve
  }

  return -((~halfDegrees & 0xff) / 2); // Temp -ve
};

const displayTemperature = () => {
  let i2c1;

  async.series([
    (cb) => i2c1 = i2c.open(1, cb),

    // Enter one shot mode (this is a non volatile setting)
    (cb) => i2c1.writeByte(DS1621_ADDR, CMD_ACCESS_CONFIG, 0x01, cb),

    // Wait while non volatile memory busy
    (cb) => {
      const wait = () => {
        i2c1.readByte(DS1621_ADDR, CMD_ACCESS_CONFIG, (err, config) => {
          if (err) return cb(err);
          if (config & 0x10) return wait();
          cb(null);
        });
      };

      wait();
    },

    // Start temperature conversion
    (cb) => i2c1.sendByte(DS1621_ADDR, CMD_START_CONVERT, cb),

    // Wait for temperature conversion to complete
    (cb) => {
      const wait = () => {
        i2c1.readByte(DS1621_ADDR, CMD_ACCESS_CONFIG, (err, config) => {
          if (err) return cb(err);
          if ((config & 0x80) === 0) return wait();
          cb(null);
        });
      };

      wait();
    },

    // Display temperature
    (cb) => {
      i2c1.readWord(DS1621_ADDR, CMD_READ_TEMP, (err, rawTemp) => {
        if (err) return cb(err);
        console.log('temp: ' + toCelsius(rawTemp));
        cb(null);
      });
    },

    (cb) => i2c1.close(cb)
  ], (err) => {
    if (err) throw err;
  });
};

displayTemperature();

Example 3 - Accessing Multiple Devices Asynchronously and Concurrently

This example demonstrates concurrent asynchronous access to two devices on the same bus, a DS1621 temperature sensor and an Adafruit TSL2561 digital luminosity/lux/light sensor.

const i2c = require('i2c-bus');

const DS1621_ADDR = 0x48;
const DS1621_CMD_ACCESS_TH = 0xa1;

const TSL2561_ADDR = 0x39;
const TSL2561_CMD = 0x80;
const TSL2561_REG_ID = 0x0a;

const i2c1 = i2c.open(1, (err) => {
  if (err) throw err;

  const readDs1621TempHigh = () => {
    i2c1.readWord(DS1621_ADDR, DS1621_CMD_ACCESS_TH, (err, tempHigh) => {
      if (err) throw err;
      console.log(tempHigh);
      readDs1621TempHigh();
    });
  };

  const readTsl2561Id = () => {
    i2c1.readByte(TSL2561_ADDR, TSL2561_CMD | TSL2561_REG_ID, (err, id) => {
      if (err) throw err;
      console.log(id);
      readTsl2561Id();
    });
  };

  readDs1621TempHigh();
  readTsl2561Id();
});

API

All methods have asynchronous and synchronous forms.

The asynchronous form always take a completion callback as its last argument. The arguments passed to the completion callback depend on the method, but the first argument is always reserved for an exception. If the operation was completed successfully, then the first argument will be null or undefined.

When using the synchronous form any exceptions are immediately thrown. You can use try/catch to handle exceptions or allow them to bubble up.

open(busNumber [, options], cb)

busNumber - the number of the I2C bus/adapter to open, 0 for /dev/i2c-0, 1 for /dev/i2c-1, ...
options - an optional options object
cb - completion callback

Asynchronous open. Returns a new Bus object. The callback gets one argument (err).

The following options are supported:

forceAccess - A boolean value specifying whether access to devices on the I2C bus should be allowed even if they are already in use by a kernel driver/module. Corresponds to I2C_SLAVE_FORCE on Linux. The valid values for forceAccess are true and false. Optional, the default value is false.

openSync(busNumber [, options])

busNumber - the number of the I2C bus/adapter to open, 0 for /dev/i2c-0, 1 for /dev/i2c-1, ...
options - an optional options object

Synchronous open. Returns a new Bus object.

The following options are supported:

forceAccess - A boolean value specifying whether access to devices on the I2C bus should be allowed even if they are already in use by a kernel driver/module. Corresponds to I2C_SLAVE_FORCE on Linux. The valid values for forceAccess are true and false. Optional, the default value is false.

bus.close(cb)

cb - completion callback

Asynchronous close. The callback gets one argument (err).

bus.closeSync()

Synchronous close.

bus.i2cFuncs(cb)

cb - completion callback

Determine functionality of the bus/adapter asynchronously. The callback gets two argument (err, funcs). funcs is a frozen I2cFuncs object describing the functionality available. See also I2C functionality.

bus.i2cFuncsSync()

Determine functionality of the bus/adapter Synchronously. Returns a frozen I2cFuncs object describing the functionality available. See also I2C functionality.

bus.scan([startAddr,] [endAddr,] cb)

startAddr - an integer specifying the start address of the scan range, optional
endAddr - an integer specifying the end addrerss of the scan range, optional
cb - completion callback

bus.scan(cb) - scan for I2C devices in address range 0x03 through 0x77
bus.scan(addr, cb) - scan for an I2C device at address addr
bus.scan(startAddr, endAddr, cb) - scan for I2C devices in address range startAddr through endAddr

Scans the I2C bus asynchronously for devices. The default address range 0x03 through 0x77 is the same as the default address range used by the i2cdetect command line tool. The callback gets two arguments (err, devices). devices is an array of numbers where each number represents the I2C address of a device which was detected.

bus.scanSync([startAddr,] [endAddr])

startAddr - an integer specifying the start address of the scan range, optional
endAddr - an integer specifying the end addrerss of the scan range, optional

bus.scan() - scan for I2C devices in address range 0x03 through 0x77
bus.scan(addr) - scan for an I2C device at address addr
bus.scan(startAddr, endAddr) - scan for I2C devices in address range startAddr through endAddr

Scans the I2C bus synchronously for devices. The default address range 0x03 through 0x77 is the same as the default address range used by the i2cdetect command line tool. Returns an array of numbers where each number represents the I2C address of a device which was detected.

bus.deviceId(addr, cb)

addr - I2C device address
cb - completion callback

Asynchronous I2C device Id. The callback gets two arguments (err, id). id is an object with the properties manufacturer, product and if known a human readable name for the associated manufacturer. manufacturer and product are numbers, name is a string.

bus.deviceIdSync(addr)

addr - I2C device address

Synchronous I2C device Id. Returns an object with the properties manufacturer, product and if known a human readable name for the associated manufacturer. manufacturer and product are numbers, name is a string.

bus.i2cRead(addr, length, buffer, cb)

addr - I2C device address
length - an integer specifying the number of bytes to read
buffer - the buffer that the data will be written to (must conatin at least length bytes)
cb - completion callback

Asynchronous plain I2C read. The callback gets three argument (err, bytesRead, buffer). bytesRead is the number of bytes read.

bus.i2cReadSync(addr, length, buffer)

addr - I2C device address
length - an integer specifying the number of bytes to read
buffer - the buffer that the data will be written to (must conatin at least length bytes)

Synchronous plain I2C read. Returns the number of bytes read.

bus.i2cWrite(addr, length, buffer, cb)

addr - I2C device address
length - an integer specifying the number of bytes to write
buffer - the buffer containing the data to write (must conatin at least length bytes)
cb - completion callback

Asynchronous plain I2C write. The callback gets three argument (err, bytesWritten, buffer). bytesWritten is the number of bytes written.

bus.i2cWriteSync(addr, length, buffer)

addr - I2C device address
length - an integer specifying the number of bytes to write
buffer - the buffer containing the data to write (must conatin at least length bytes)

Synchronous plain I2C write. Returns the number of bytes written.

bus.readByte(addr, cmd, cb)

addr - I2C device address
cmd - command code
cb - completion callback

Asynchronous SMBus read byte. The callback gets two arguments (err, byte).

bus.readByteSync(addr, cmd)

addr - I2C device address
cmd - command code

Synchronous SMBus read byte. Returns the byte read.

bus.readWord(addr, cmd, cb)

addr - I2C device address
cmd - command code
cb - completion callback

Asynchronous SMBus read word. The callback gets two arguments (err, word).

bus.readWordSync(addr, cmd)

addr - I2C device address
cmd - command code

Synchronous SMBus read word. Returns the word read.

bus.readI2cBlock(addr, cmd, length, buffer, cb)

addr - I2C device address
cmd - command code
length - an integer specifying the number of bytes to read (max 32)
buffer - the buffer that the data will be written to (must conatin at least length bytes)
cb - completion callback

Asynchronous I2C block read (not defined by the SMBus specification). Reads a block of bytes from a device, from a designated register that is specified by cmd. The callback gets three arguments (err, bytesRead, buffer). bytesRead is the number of bytes read.

bus.readI2cBlockSync(addr, cmd, length, buffer)

addr - I2C device address
cmd - command code
length - an integer specifying the number of bytes to read (max 32)
buffer - the buffer that the data will be written to (must conatin at least length bytes)

Synchronous I2C block read (not defined by the SMBus specification). Reads a block of bytes from a device, from a designated register that is specified by cmd. Returns the number of bytes read.

bus.receiveByte(addr, cb)

addr - I2C device address
cb - completion callback

Asynchronous SMBus receive byte. The callback gets two arguments (err, byte).

bus.receiveByteSync(addr)

addr - I2C device address

Synchronous SMBus receive byte. Returns the byte received.

bus.sendByte(addr, byte, cb)

addr - I2C device address
byte - data byte
cb - completion callback

Asynchronous SMBus send byte. The callback gets one argument (err).

bus.sendByteSync(addr, byte)

addr - I2C device address
byte - data byte

Synchronous SMBus send byte.

bus.writeByte(addr, cmd, byte, cb)

addr - I2C device address
cmd - command code
byte - data byte
cb - completion callback

Asynchronous SMBus write byte. The callback gets one argument (err).

bus.writeByteSync(addr, cmd, byte)

addr - I2C device address
cmd - command code
byte - data byte

Synchronous SMBus write byte.

bus.writeWord(addr, cmd, word, cb)

addr - I2C device address
cmd - command code
word - data word
cb - completion callback

Asynchronous SMBus write word. The callback gets one argument (err).

bus.writeWordSync(addr, cmd, word)

addr - I2C device address
cmd - command code
word - data word

Synchronous SMBus write word.

bus.writeQuick(addr, bit, cb)

addr - I2C device address
bit - bit to write (0 or 1)
cb - completion callback

Asynchronous SMBus quick command. Writes a single bit to the device. The callback gets one argument (err).

bus.writeQuickSync(addr, bit)

addr - I2C device address
bit - bit to write (0 or 1)

Synchronous SMBus quick command. Writes a single bit to the device.

bus.writeI2cBlock(addr, cmd, length, buffer, cb)

addr - I2C device address
cmd - command code
length - an integer specifying the number of bytes to write (max 32)
buffer - the buffer containing the data to write (must conatin at least length bytes)
cb - completion callback

Asynchronous I2C block write (not defined by the SMBus specification). Writes a block of bytes to a device, to a designated register that is specified by cmd. The callback gets three argument (err, bytesWritten, buffer). bytesWritten is the number of bytes written.

bus.writeI2cBlockSync(addr, cmd, length, buffer)

addr - I2C device address
cmd - command code
length - an integer specifying the number of bytes to write (max 32)
buffer - the buffer containing the data to write (must conatin at least length bytes)

Synchronous I2C block write (not defined by the SMBus specification). Writes a block of bytes to a device, to a designated register that is specified by cmd.

funcs.i2c - boolean

Specifies whether or not the adapter handles plain I2C-level commands (Pure SMBus adapters typically can not do these, I2C_FUNC_I2C).

funcs.tenBitAddr - boolean

Specifies whether or not the adapter handles the 10-bit address extensions (I2C_FUNC_10BIT_ADDR).

funcs.protocolMangling - boolean

Specifies whether or not the adapter knows about the I2C_M_IGNORE_NAK, I2C_M_REV_DIR_ADDR and I2C_M_NO_RD_ACK flags (which modify the I2C protocol! I2C_FUNC_PROTOCOL_MANGLING).

funcs.smbusPec - boolean

Specifies whether or not the adapter handles packet error checking (I2C_FUNC_SMBUS_PEC).

funcs.smbusBlockProcCall - boolean

Specifies whether or not the adapter handles the SMBus block process call command (I2C_FUNC_SMBUS_BLOCK_PROC_CALL).

funcs.smbusQuick - boolean

Specifies whether or not the adapter handles the SMBus quick command (I2C_FUNC_SMBUS_QUICK).

funcs.smbusReceiveByte - boolean

Specifies whether or not the adapter handles the SMBus receive byte command (I2C_FUNC_SMBUS_READ_BYTE).

funcs.smbusSendByte - boolean

Specifies whether or not the adapter handles the SMBus send byte command (I2C_FUNC_SMBUS_WRITE_BYTE).

funcs.smbusReadByte - boolean

Specifies whether or not the adapter handles the SMBus read byte command (I2C_FUNC_SMBUS_READ_BYTE_DATA).

funcs.smbusWriteByte - boolean

Specifies whether or not the adapter handles the SMBus write byte command (I2C_FUNC_SMBUS_WRITE_BYTE_DATA).

funcs.smbusReadWord - boolean

Specifies whether or not the adapter handles the SMBus read word command (I2C_FUNC_SMBUS_READ_WORD_DATA).

funcs.smbusWriteWord - boolean

Specifies whether or not the adapter handles the SMBus write word command (I2C_FUNC_SMBUS_WRITE_WORD_DATA).

funcs.smbusProcCall - boolean

Specifies whether or not the adapter handles the SMBus process call command (I2C_FUNC_SMBUS_PROC_CALL).

funcs.smbusReadBlock - boolean

Specifies whether or not the adapter handles the SMBus read block command (I2C_FUNC_SMBUS_READ_BLOCK_DATA).

funcs.smbusWriteBlock - boolean

Specifies whether or not the adapter handles the SMBus write block command (I2C_FUNC_SMBUS_WRITE_BLOCK_DATA).

funcs.smbusReadI2cBlock - boolean

Specifies whether or not the adapter handles the SMBus read I2C block command (I2C_FUNC_SMBUS_READ_I2C_BLOCK).

funcs.smbusWriteI2cBlock - boolean

Specifies whether or not the adapter handles the SMBus write i2c block command (I2C_FUNC_SMBUS_WRITE_I2C_BLOCK).

i2c-bus-i2c-1