Homebridge Midea Air

Programming is not easy.
If you like this plugin or want to contribute to future development, a donation will help.

Homebridge plugin to control Midea Air Conditioner & Dehumidifier units.

 

Requirements

   

Configuration

Add this to the platforms array in your config.json:

{
    "user": "MIDEA_ACCOUNT_EMAIL",
    "password": "MIDEA_PASSWORD",
    "registeredApp": "NetHomePlus",
    "interval": 30,
    "devices": [
            {
                "deviceId": "DeviceID",
                "supportedSwingMode": "Both",
                "temperatureSteps": 1,
                "minTemp": 17,
                "maxTemp": 30,
                "fanOnlyMode": false,
                "OutdoorTemperature": false,
                "useFahrenheit": false,
                "audibleFeedback": false
            }
    ],
    "platform": "midea-air"
}

⚠️ Knowing Issues

• This plugin don't fully supported Midea Mission II / Blanc / OSK105, you can only get device status.
  
• Using the Midea app and Homebridge Midea Air plugin at the same time causes a login error. Try to use NetHome Plus app instead.
  
• This plugin don't support MSmartHome app.
  

Supported Devices

This Plugin support Midea providers dongle - OSK102 / OSK103 (Hualing, Senville, Klimaire, AirCon, Century, Pridiom, Thermocore, Comfee, Alpine Home Air, Artel, Beko, Electrolux, Galactic, Idea, Inventor, Kaisai, Mitsui, Mr. Cool, Neoclima, Olimpia Splendid, Pioneer, QLIMA, Royal Clima, Qzen, Toshiba, Carrier, Goodman, Friedrich, Samsung, Kenmore, Trane, Lennox, LG, Electra and much more) and should be able to access all device in the user's account.
However, many devices may not be supported or function incorrectly.
This is due to the lack of documentation of the raw MSmart API.
If you encounter any problems, please open a new issue and specify your device model.

⚙️ Optional per-device Configuration Values

To set specific per-device values, you need to add deviceId that can find in:

1. Homebridge console log.
2. HomeKit app, device settings, info.

🌡️ Temperature Display Units

This Plugin support Celsius & Fahrenheit (You can set the Default unit on Homebridge config).
Display Units can set in HomeKit app, device settings.
This is just to control the temperature unit of the AC's display. The target temperature setter always expects a celsius temperature (resolution of 0.5C), as does the midea API

🌡️ Temperature Steps

This option change Temperature Steps on HomeKit. You can choose 1˚ or 0.5˚, default is: 1˚

🌡️ Temperature Threshold

This option change Temperature Thrashold. Defaults: minimum 17˚ / maximum 30˚

💨 Rotation Speed and Swing

Rotation Speed and Swing mode can set in the HomeKit app, device settings. Rotation Speed values are:

Air Conditioner	Dehumidifier
0% Device Off	0% Device Off
20% Silent	30% Silent
40% Low	...
60% Middle	60% Medium
80% High	...
100% Auto	100% Turbo

Dehumidifier does not have an Swing mode, therefore in config.json select "None".

🌡️ Dehumidifier Relative Humidity

There is a difference between Midea app / Homebridge to HomeKit. HomeKit Relative Humidity work between 0%-100% - Apple Policy.

App / Homebridge	HomeKit
35%	0%
40%	10%
45%	20%
50%	30%
55%	40%
60%	50%
65%	60%
70%	70%
75%	80%
80%	90%
85%	100%

Dehumidifier Modes

Dehumidifier has 4 Operational modes. You can change modes according to the following table:

Device	HomeKit
Normal	HUMIDIFIER
Continuous	---
Smart	AUTO
Dryer	DEHUMIDIFIER

Continuous mode will be considered as Auto mode.

💨 Fan Mode

This allows you to enable a Fan mode service.

🌡️ Outdoor Temperature Sensor

This allows you to enable Outdoor Temperature service, if the AC support.

🔈 Audible Feedback

This set the Audible Feedback (beep sound).

🙏 Credits

This plugin would not have been possible without the fundamentals of all the Midea API clients in Python provided.