homebridge-magichome-platform-updated

    1.1.2 • Public • Published

    homebridge-magichome-platform-updated

    NPM

    npm npm

    A Homebridge plugin for devices running fade/strobe effects on the Magic Home Wi-Fi system.

    Description

    This plugin will create LightBulbs in Homekit capable of turning on/off, change color, change hue, change saturation.

    This plugin can also create preset patterns Switches (color cycle, fade, strobe).

    Its a great utility tool to set house mood to party/soothing with custom music.

    Can cycle through colors, sync all lights to strobe/fade.

    Installation

        $ sudo pip3 install flux_led
        $ npm install -g --unsafe-perm homebridge
        $ npm install -g --unsafe-perm homebridge-magichome-platform-updated

    Edit config.json. Refer to config-sample.json.

    Available Presets Scenes

    	seven_color_cross_fade
    	red_gradual_change
    	green_gradual_change
    	blue_gradual_change
    	yellow_gradual_change
    	cyan_gradual_change
    	purple_gradual_change
    	white_gradual_change
    	red_green_cross_fade
    	red_blue_cross_fade
    	green_blue_cross_fade
    	seven_color_strobe_flash
    	red_strobe_flash
    	green_strobe_flash
    	blue_stobe_flash
    	yellow_strobe_flash
    	cyan_strobe_flash
    	purple_strobe_flash
    	white_strobe_flash
    	seven_color_jumping
    

    Demo

    Demo

    Compatible Devices

    Any devices created by Zengge and running on the Magic Home Wi-Fi (or other apps by the same developer such as LED Magic Color) app should work with this plugin. Some examples of compatible devices are:

    Sample Config :

    {
        "platforms": [
            {
                "platform": "MagicHome-Platform-Updated",
                "debug": true,
                "lights": [
                    {
                        "name": "Kitchen LED Strip",
                        "ip": "192.168.1.111",
                        "setup": "RGBW",
                        "purewhite": false,
                        "timeout": 10000
                    },
                    {
                        "name": "Living Room LED Strip",
                        "ip": "DC4F22C5XXXX",
                        "setup": "RGBWW",
                        "purewhite": true
                    }
                ],
                "presetSwitches": [
                    {
                        "name": "Kitchen Color Strobe Flash (Party)",
                        "ips": {
                            "192.168.1.111": "255,255,255"
                        },
                        "preset": "seven_color_strobe_flash",
                        "speed": 60
                    },
                    {
                        "name": "All Lights Cross Fade (Soothing)",
                        "ips": {
                            "192.168.1.111": "0,150,255",
                            "DC4F22C5XXXX": "102, 255, 102"
    
                        },
                        "preset": "seven_color_cross_fade",
                        "speed": 40,
                        "shouldTurnOff": true
                    },
                    {
                        "name": "Jungle Mood (Soothing)",
                        "ips": {
                            "192.168.1.111": "0,150,255",
                            "DC4F22C5XXXX": "102, 255, 102"
                        },
                        "preset": "green_gradual_change",
                        "speed": 40,
                    }
                ]
            }
        ]
    }

    Preset Switch Configuration

    ips must be a key-value object where key is MagicHome LED IP Address e.g. 192.168.1.11 or DC4F22C5XXXX MAC Address & value is default rgb color of the light. e.g. "255,255,255" (White). Turning off Preset Pattern Switch , all lights will be reset to this color.

    You can use MAC Address instead of IP Address as well. Please note format of MAC Address. It should be in capital letters and : should not be present. e.g. DC4F22C5XXXX

    Do note : While using MACS : This plugin auto discover connected lights on the network and map IP's to their corresponding MAC. Initially it can take time to discover all devices. All devices should be discovered and mapped in 60-120s. Once mapped IP & MACs are cached, and gets rediscovered every 30s to map new IP to the light. This feature is useful for people unable to assign Static IP to their lights.

    Default Discovery Interval => 5 Minutes Default Device Status Update Interval => 1 Minute

    Setting Device timeout to 0, will disable polling device for status update.

    Lint

        $ npm run lint

    Install

    npm i homebridge-magichome-platform-updated

    DownloadsWeekly Downloads

    17

    Version

    1.1.2

    License

    ISC

    Unpacked Size

    31.1 kB

    Total Files

    17

    Last publish

    Collaborators

    • sameignatovich