homebridge-avea-bulb

1.1.3 • Public • Published

homebridge-avea-bulb

Avea Bulb Plugin for HomeBridge


English

What this plugin does

Using BLE, it adds Homekit support for Elgato Avea Bulbs.

How this plugin works

Using Node.js Avea Bulb Prototol and BLE, allows to control Elgato Avea Bulbs via Homekit.

Things to know about this plugin

The bulb only accepts one control connection, I think, at a time, and Homebridge will connect to the bulb for as long as it is running, so the Avea App must not be running at the same time as Homebridge.

The node process of Homebridge must have permissions to scan for Bluetooth devices so, either you run it as root (i.e. with sudo) or give privileges as explained here

Installation

  1. Make sure that bluetooth is installed, enabled and available in your system
  2. Install homebridge using npm install -g homebridge.
  3. Install this plugin using npm install -g --unsafe-perm homebridge-avea-bulb.
  4. Update your configuration file. See configuration sample below.

Configuration

Edit your config.json accordingly. Configuration sample:

   "accessories": [
       {
           "accessory": "AveaBulb",
           "name": "Avea Bulb"
       }
   ],

Advanced Configuration (Optional)

This step is not required. If you have only one bulb, the first one detected will be used, so no ID is needed.

   "accessories": [
       {
           "accessory": "AveaBulb",
           "name": "Kitchen Lamp",
           "manufacturer": "Elgato",
           "model": "Avea",
           "serialnumber": "Avea_7F14",
           "bluetoothid": "001583d2147f"
       }
   ],
Fields Description Required
accessory Must always be AveaBulb. Yes
name Name of your device. No
manufacturer Manufacturer of your device. No
model Model of your device. No
serialnumber Serial number of your device. No
bluetoothid Bluetooth ID of the bulb (reverse serial number) No

*If you have more than one bulb you have to set the Bluetooth ID for each one of them. To find the Bluetooth ID, you have to resolve the MAC Bluetooth address. For example, in Linux with the bulb turned on:

bluetoothctl
#scan on
…
[NEW] Device 87:B6:03:8E:5F:42 Avea_425F
…
#scan off

This would mean that the Bluetooth ID is 87b6038e5f42.

*Changing the name in config.json will create a new device instead of renaming the existing one in HomeKit. It's strongly recommended that you rename the bulb using a HomeKit app only. The name used for homebridge has nothing to do with the one used with the Avea App. It will be the name that shows up when the device appears in HomeKit.

Troubleshooting

Error: Could not start scanning, state is unauthorized (not poweredOn)

This error appears if the bluetooth library cannot find or access your bluetooth interface. This can happen if you're not running homebridge as root.

To solve it you must have the setcap command installed and the use the following command

sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)

Castellano

Para qué sirve este plugin

Añade soporte para Homekit a bombillas Elgato Avea, usando bluetooth (BLE).

Cómo funciona

Usando el protocolo Avea Bulb de Node.js y bluetooth, permite controlar bombillas Elgato Avea a través de Homekit.

Más información

La bombilla sólo acepta una conexión de control, creo, a la vez, y Homebridge estará conectado a la bombilla mientres esté corriendo, así que la App de Avea no debe estar corriendo a la vez que Homebridge.

El proceso node de Homebridge debe tener permisos suficientes para buscar dispositivos Bluetooth así que, o bien debe ser root (por ej. con sudo) o con privilegios extra tal y como explican aquí

Instalación

  1. Debe estar instalado, activo y disponible, bluetooth en el sistema donde se vaya a instalar
  2. Instalar homebridge usando npm install -g homebridge.
  3. Instalar este plugin con el comando npm install -g --unsafe-perm homebridge-avea-bulb.
  4. Actualizar el fichero de configuración. Véase un ejemplo a continuación.

Configuración

Editar el fichero config.json según se necesite. Ejemplo de configuración:

   "accessories": [
       {
           "accessory": "AveaBulb",
           "name": "Bombilla Avea"
       }
   ],

Configuración avanzada (opcional)

Este paso no es necesario. Si sólo se tiene una bombilla, la primera en ser detectada es la que se utilizará, así que no se necesita indicar un ID.

   "accessories": [
       {
           "accessory": "AveaBulb",
           "name": "Lámpara de la sala de estar",
           "manufacturer": "Elgato",
           "model": "Avea",
           "serialnumber": "Avea_7F14",
           "bluetoothid": "001583d2147f"
       }
   ],
Campos Descripción Requerido
accessory Siempre ha de ser AveaBulb.
name Nombre para el dispositivo. No
manufacturer Fabricante del dispositivo. No
model Modelo del dispositivo. No
serialnumber Número de serie del dispositivo. No
bluetoothid ID bluetooth de la bombilla (núm. serie invertido) No

*Si se tiene más de una bombilla, se ha de indicar el ID Bluetooth de cada una de ellas. Para averiguar el ID Bluetooth, se tiene que identificar la dirección MAC Bluetooth. Por ejemplo, en Linux, con la bombilla encendida:

bluetoothctl
#scan on
…
[NEW] Device 87:B6:03:8E:5F:42 Avea_425F
…
#scan off

Esto querría decir que el ID Bluetooth es 87b6038e5f42.

*Cambiar el nombre name en config.json creará un nuevo dispositivo en vez de renombrar el existente en Homekit. Se recomienda que sólo se cambie el nombre de la bombilla usando una App de HomeKit. El nombre que utiliza homebridge no tiene nada que ver con el que utiliza la App de Avea. Es el nombre que aparece cuando se añade el dispositivo a HomeKit.

Solución de problemas

Error: Could not start scanning, state is unauthorized (not poweredOn)

Este error suele aparecer si la biblioteca de bluetooth no puede encontrar o acceder a la interfaz. Esto puede suceder si no se está ejecutando homebridge con privilegios de usuario root.

Para solucionarlo se ha de tener instalado el comando setcap, y utilizar el siguiente comando

sudo setcap cap_net_raw+eip $(eval readlink -f `which node`)

Copyright

Copyright (c) 2017 kounch

Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Dependents (0)

Package Sidebar

Install

npm i homebridge-avea-bulb

Weekly Downloads

4

Version

1.1.3

License

ISC

Unpacked Size

42.3 kB

Total Files

9

Last publish

Collaborators

  • kounch