Novices Performing Miracles
    Share your code. npm Orgs help your team discover, share, and reuse code. Create a free org »

    hcp_iot_sensortagpublic

    This is module is under development do not use it

    Using this whenever your raspberry will connect to any preconfigured wifi network.

    Setting up for sending Mail cd /etc/network/if-up.d

    copy script "sendMailScript" (Place in the hcp_iot_sensortag) to the abvoe mentioned folder and make it executable with following command

    cp sendMailScript /etc/network/if-up.d chmod +x sendMailScript

    Set up wifi using terminal or GUI of PI

    cd /etc/wpa_supplicant/

    Edit wpa_cupplicant

    sudo nano wpa_supplicant.conf

    copy this at the end of file

    you can have multiple entries like this with different name

    priority in following structure give the priority to connecting network higher the priority value it will connect first in the list

    set username password of working wifi network

    restart the device it will connect to the configured wifi network

    network={ ssid="Username" psk="passkey" key_mgmt=WPA-PSK priority=4 }

    After this step in some time you should get the ip address on your mail to access pi on your network

    Keywords

    none

    install

    npm i hcp_iot_sensortag

    Downloadsweekly downloads

    12

    version

    1.0.4

    license

    ISC

    last publish

    collaborators

    • avatar