Nutty Professor Movie


    0.1.0 • Public • Published


    gulp-di is a dependency injection framework for the Gulp streaming build system.

    • Shrink your Gulpfile to less than ten lines.
    • Manage gulp plugins solely via npm and variables in your task module files.
    • No major refactoring required.

    See below for further examples!


      $ npm install --save gulp-di

    Built-in dependencies

    You can use the following dependencies in your modules and tasks.

    Name Type Description
    _ Function lodash
    basePath Function Resolves a path relative to your project path
    chalk Object chalk for using colors when logging
    gulp Object The gulp instance
    gutil Object gulp-util
    log Function gulp-util's log
    Package Object package.json as object
    runningTasks Array currently running gulp tasks (experimental)
    taskInfo Object infos about task functions (experimental)

    In addition, all Gulp modules which are installed in your package.json are available in your modules, driven by gulp-load-plugins.

    For example, if you install the "gulp-concat" as devDependency (in your package.json) plugin using ...

      $ npm install --save-dev gulp-concat

    ... it will become available as dependency in each module file:

    // tasks/concat-texts.js
    module.exports = (gulp, concat) => {
      /* Concatenates all *.txt files from src/ to public/result.txt */
      return gulp.src('src/**/*.txt')

    Please read the API notes below for configuring a pattern for packages which do not start with "gulp-" or "gulp.*".

    Example: Basic refactoring

    Instead of declaring all gulp tasks in a single file, gulp-di allows you to take a more modular approach. You can separate your stream definitions from configurations while gulp-di handles the majority of your existing calls to require() for you.

    In this example, we will see how we can move a call to gulp.task() to a separate file.

    Additionally, we will see how we can detach a constant (in this case: a glob matching all files with the "jpg" extension) from the actual task.

    The following task

    /* gulpfile.js (previous version) */
    const gulp = require('gulp');
    gulp.task('images', () => {
      return gulp.src('./**/*.jpg')

    would be re-factored to the file at tasks/images.js as following.

    /* tasks/images.js */
    module.exports = (gulp, imagesPath) => {
      gulp.task('images', () => {
        return gulp.src(imagesPath)

    Notice that the function uses the "imagePath" constant. Such constants can be defined in your Gulpfile files in order to separate them from the tasks.

    Thus, you can now use all of your Functional programming skills with Gulp and assemble your tasks from other declarations and build much more flexible and re-usable tasks.

    gulp-di should help you to reduce your Gulpfile's complexity. In this example, we will declare additionally the "imagePath" constant which is being used in our "images" task.

    /* gulpfile.js (refactored version) */
    const gulp = require('gulp');
    let di = require('gulp-di')(gulp);
    .provide('imagesPath', 'src/**/*.jpg')

    Additionally, you can now "inject" arbitrary values into your functions, e. g. run-time configurations, asynchronous methods for usage with Gulp's asynchronous API, constants etc.

    The following example uses constants and modules in order to compose a helper function.

    /* gulpfile.js (refactored version) */
    const gulp = require('gulp');
    let di = require('gulp-di')(gulp);
    .provide('sourcePath', 'src')                    // Provide a string constant.
    .module('extensionPath', (sourcePath) => {       // Add a module providing a
                                                     // helper function to get a
                                                     // extension name.
      return (extname) => `${sourcePath}/**/*.${extname}`;
    .task(function (gulp, extensionPath) {
      gulp.task('copy-images', function () {
        // Copies all *.jpg images from src/ to public/
        return gulp.src(extensionPath('jpg')).pipe(gulp.dest('public/'));


    GulpDI(object gulp, object options)

    Creates a new GulpDI instance. The first argument must always be the gulp instance from your Gulpfile.

    If you specify options, these will be passed to gulp-load-plugins under the hood ("camelize" cannot be configured at the moment).

    const gulp = require('gulp');
    let di = GulpDI(gulp, {
      DEBUG: false, // when set to true, the plugin will log info to console. Useful for bug reporting and issue debugging
      pattern: ['gulp-*', 'gulp.*'], // the glob(s) to search for
      config: 'package.json', // where to find the plugins, by default searched up from process.cwd()
      scope: ['dependencies', 'devDependencies', 'peerDependencies'], // which keys in the config to look within
      replaceString: /^gulp(-|\.)/, // what to remove from the name of the module when adding it to the context
      rename: {}, // a mapping of plugins to rename
      renameFn: function (name) { ... } // a function to handle the renaming of plugins (the default works)

    The following options are additionally available:

    Name Type Description
    DEBUG Boolean Whether to log debugging information or not
    noBuiltin Boolean Disables helpers: basePath, log, Package
    noHelp Boolean Toggles the "help" task/providing taskInfo
    noModules Boolean Do not expose chalk, gutil and lodash (_)
    noRunningTasks Boolean Do not provide the "runningTasks" function

    Chainable methods

    The following methods are chainable:

    .inject(function fn, returnValue)

    Executes code which depends on the current's instance dependencies. Please note that you will have to resolve() your instance if you should depend on anything else than payloads which have been initialized by provide().

    When returnValue is set, this method returns the return value of the injected function (e.g. the function is not chainable when set to true)

    di.provide({ 'PI' : Math.PI, 'DEG_TO_RAD' : 180 / Math.PI });
    let circle = di.inject(['PI','DEG_TO_RAD', (PI, DEG_TO_RAD) => {
      return 2 * PI * DEG_TO_RAD;
    }], true);
    console.log(circle); // 360

    .provide(string name, * payload)

    Provides a constant for further usage in modules and tasks. You can can also provide a hashmap of constants as following:

    di.provide({ 'PI' : Math.PI, 'SIN' : Math.sin });

    .task(function fn)

    Adds a task module. Add your provide()d dependencies to the function's argument list to require a dependency. Their order does not matter.

    Please note that tasks don't have names (in contrast to modules) as you shouldn't depend on them using gulp-di. Use the "deps" array when calling gulp.task() instead in order to achieve a specific task execution order.

    You can also use a hashmap as following:

      /* Copies all *.png images from src/ to public/ */
      assets : (gulp) => gulp.src('src/**/*.png').pipe(gulp.dest('public/'))

    .module(string name,function fn)

    Adds a module with the given name. In contrast to a task, a module has a name and its return value will be provided - thus, modules can be injected into tasks as well as your constants.

    You can provide a hashmap, too.


    Resolves all dependencies and runs all task modules. You need to call this method after your declarations.

    .tasks(string directory)

    Loads all tasks from the specified directory, using require-dir.

    .modules(string directory)

    Loads all modules from the specified directory.

    .byId(string name)

    Returns the specified dependency. When you are demanding modules, please keep in mind that you will need to call resolve() beforehand, otherwise, this would return your module function.

    Using dependency injection in general

    By design, dependency injection is opt-in for everything, thus you can use gulp-di for use cases beyond your gulp tasks.

    Setting values

    When using DI, you can set values on your instance to arbitrary values. They will become available in your module files.

    const gulp = require('gulp');
    let di = require('gulp-di')(gulp, { DEBUG: false });
    di.provide('PI', Math.PI);
    di.provide('RAD_TO_DEG', 180 / Math.PI);

    Declaring task modules

    You can then declare a single function or a whole directory of CommonJS modules using the tasks() method.

    di.task((PI, RAD_TO_DEG, basePath) => {
      console.log((PI * 2 * RAD_TO_DEG) + '°');

    Note that you have access to the gulp-di instance in the task function's scope. You could f.e. access the "options" object in your function as following:

    di.task(() => {
      if (this.options.DEBUG) { console.log('Debug is enabled'); }

    Running all modules and resolving dependencies

    You need to execute all provided values and modules by running resolve() afterwards.

    While you place calls to task(), tasks() and provide, the execution order of your depends on the declared dependencies. With resolve(), the graph is being resolved and all modules are called with the provided values.

    // logs 360°

    Experimental functionalities

    Please use these features with caution for now.

    gulp help

    This example is included by default.

    An included experiment uses the API to intersect all calls to gulp.task to collect information about the tasks.

    It registers a gulp "help" task which logs then all comments included in gulp.task. In addition, a "taskInfo" hashmap is available for injection. It contains the information about your gulp tasks which is being also used by the "help" task.

    const gulpDi = require('gulp-di');
    let di = gulpDi()
    .task(function (gulp, taskInfo, log, chalk) {
      gulp.task('my-help', function () {
        /* Logs basic information about tasks. */
        for (let name in taskInfo) {
          let entry = taskInfo[name];
          log(chalk.magenta(name), 'with dependencies',  entry.deps);


    This function returns an array of strings, containing all current Gulp tasks, including dependencies.

    Helper functions

    The following functions are currently not integrated into gulp-di, but you can require them as following:

    const getPath = require('gulp-di/contrib/get-path');
    const standardTask = require('gulp-di/contrib/standard-task');

    getPath(string key)

    Returns a property specified by the given dot-delimited key:

    const data = {
      at : 1350506782000,
      ids : ['507f1f77bcf86cd799439011', '507f191e810c19729de860ea']
    let PI = getPath(Math, 'PI');
    let at = getPath(data, 'at'));
    let firstId = getPath(data, 'ids.0');

    standardTask(string name, string src, string dest, ...)

    Generates a default task, assuming you want to pipe src through the plugin specified by name to dest. All parameters following "dest" are serialized if necessary and passed to the plugin.

    Using this method, you will just need to install a gulp plugin with npm and set up a task as following:

    let taskFn = standardTask('jade', 'templates/**/*.jade', 'public', { pretty : false });
    // Register the task function
    function jadeTask(gulp, jade) {
       * Generated task function, registers a "jade" task.
       * @param {object} gulp The current gulp instance
       * @param {jade} jade The "jade" gulp plugin
      gulp.task("jade", () => {
          * jade task, declared at 10-contrib.js:44
        return gulp.src("templates/**/*.jade")


    How do I insert tasks? Gulp claims "Task 'default' is not in your gulpfile" all the time!

    Please call the resolve() method after all of your module and task declarations.

    gulp-di does not find my module!

    In order to make your gulp plugins available, gulp-di uses gulp-load-plugins internally by default.

    The default pattern is ['gulp-', 'gulp.', '!gulp-di']. You need to initialize gulp-di using the "options" object in order to make plugins with arbitrary names available:

    const gulp = require('gulp');
    let di = require('gulp-di')(gulp, {
      pattern : ['gulp-*', 'gulp.*', '!gulp-di', 'webpack-stream']
    di.task((webpackStream) => {
      gulp.task('webpack', () => {
        return gulp.src('src/client.js')
        .pipe(webpackStream({ output : { filename : '[name].js' }}))

    Is it possible to add tasks asynchronously?

    No, you will need to set up asynchronous tasks which depend on each other in order to perform asynchronous tasks. Nevertheless, all tasks must be declared synchronously in order to use Gulp correctly.

    I dislike the camelCaseName of my favorite module, can I change it?

    Using gulp-load-plugins, you can change the assigned name for arbitrary modules.

    Using a rename object:

    let di = require('gulp-di')(gulp, {
      rename : {
        webpackStream : 'webpack'

    Using a renameFn:

    let replacements = { webpackStream : 'webpack'};
    let di = require('gulp-di')(gulp, {
      renameFn : (key) => return replacements[key]




    npm i gulp-di

    DownloadsWeekly Downloads






    Unpacked Size

    64.2 kB

    Total Files


    Last publish


    • cmtt