Doku

Doku.js is a terminal ui text/document viewer that supports a custom documentation syntax called doky.

Features

Border colors. (all common terminal colors: blue, red, green, yellow, magenta, cyan, white, black, results may change depending on your terminal colors)
Center content.
Change frame position.
Slide text from top to bottom.
Change common patterns.
Text search.
App Commands.

Common Patterns

Pattern	Better Pattern
Line with 10 or more `-`	`▔` (Heading-like)
Line with 10 or more `_`	`▁` (Heading-like)
Line with 10 or more `=`	`═` (Heading-like)
`==>`	`⇒`
`<==`	`⇐`
`-->`	`⟶`
`<--`	`⟵`
8 or more `-`	`―`
8 or more `_`	`▁`
`:=`	`≔`
`=:`	`≕`
`~=`	`≈`
`!=`	`≠`

Examples are located in examples/patterns.doxy

Results

Installation

npm install -g doku.js

You can then run doku by simply typing doku <filename> on any file you want.

If you don't want to install it globally, then you can install it in any directory you want then execute it via npx doku command.

Using inside another Node app

If you want to use this library within your project simply add as dependency.

npm install doku.js

After adding as dependency you can simply require it.

Example:

const doku = require("doku");

function stopExecution() {
    process.exit(0);
}

const header = "..."; // Header string that will be displayed at the top of application.
const content = "..."; // String containing document.
const isCentered = true; // Show frame at center.

const dokument = new Doku(content, header, isCentered);
dokument.subToEvent("doku-end", stopExecution);

Details

Parsing

Doku can render any plain text file as it is. It will parse file on the start then will parse again if terminal resizes. This parsing will cause change in total number of lines like shown in below.

Parsing on smaller displays

Total number of liner increased.

Parsing on larger displays

Total number of liner decreased.

Terminal

Doku clears terminal each time it will do re-rendering. You cannot really access to your terminal since it (stdin) is in raw mode.

process.stdin.setRawMode(true);
process.stdin.setEncoding('utf8');
process.stdin.resume();

Events

If you included doku as dependency to your project, then you'll have two events.

`doku-start` event

This event will be fired when construction of doku object is done.

// To subscribe
doku.subToEvent("doku-start", startHandler);

// To unsubscribe
doku.unsubToEvent("doku-start", startHandler);

`doku-end` event

This event will be fired when deconstruction of doku object is occurs.

// To subscribe
doku.subToEvent("doku-end", stopHandler);

// To unsubscribe
doku.unsubToEvent("doku-end", stopHandler);

Actions

Doku has following actions while running application:

Action	Description (all actions are case insensitive)
Next Line	d, Down Arrow, Enter
Previous Line	a, Up Arrow
Next Page (20 lines)	Page Down, Right Arrow
Previous Page (20 lines)	Page Up, Left Arrow
Go To Start	s, Home
Go To End	e, End
Go To Line Number	Print any number. Press Enter to go, q or ESC to cancel
Cycle Border Colors	r (blue, red, green, yellow, magenta, cyan, white, black)
Center Content	c
Frame Position	l
Toggle Text Slide	t
Toggle Patterns	p
Find Next	n (Go to next occurrence of word if exists)
Find Previous	b (Go to previous occurrence of word if exists)
Open Command Line	:
Show Help Window	h
Quit Application	q or CTRL+C
Quit Help	h

App Commands

While in normal mode (not in command line), if a number is entered as the first character, command line waits a line number to go. If given line number is valid then document will go to that line. You can always cancel command by pressing ESC or q.

If an error occurs, then command line (alongside with status) will turn red. For example if user presses k which is not mapped, an error like shown below will be displayed.

If user types : then it opens a command line. There are couple of things that users can do:

Commands	Shortcut	Description	Argument Number	Argument Type
`switch`	`sw`	switches state of given command	1	Any
`toggle`	`to`	toggles given command	1	Any
`find`	`f`	find all occurrences of given text	1	Any
`time`	`t`	sets time for text slide	1	Number
`quit`	`q`	quits application	0	None

Switch Command

Commands	Abbr.	Description	# of Arguments
`block`		changes border block	0
`border-color`	`bc`	changes border color	0

Toggle Command

Commands	Abbr.	Description	# of Arguments
`same-color`	`sc`	set all borders same color	0
`case-ignore`	`ci`	case sensitivity in find command	0

Time Command

It sets the time interval to text slide command. Default is 1000ms (1 second). It takes 1 argument. That argument must be positive number. It is in milliseconds.

Quit Command

Quits application.

Screenshots

Search Command

Searching Next by Pressing `n`

Frame Left

Frame Center

Content Centered

doky - Custom Documentation Syntax

doky has custom commands that allows doku to change what is displayed on terminal.

Table

If you want to display your data in a tabular form, you use following commands:

@{begin-table}@: This command starts table data. Whole line must be @{begin-table}@ to parse everything correctly.
@{end-table}@: This command ends table data. Whole line must be @{end-table}@ to parse everything correctly.

In between these two lines with command, you need to provide data as below:

| Column | .... | .... | .... |  --> Columns 
|-----------------------------|  --> Separator
| Row1   | .... | .... | .... |  --> Row
| Row2   | .... | .... | .... |  --> Row

You can add | character to separator line if you want. There is no left, right or center align.

Examples

Simple

@{begin-table}@
| Column 1 | Column 2 | Column 3 |
|----------|----------|----------|
| Data 1-1 | Data 1-2 | Data 1-3 | 
| Data 3-1 | Data 3-2 | Data 3-3 |
@{end-table}@

Missing Fields

@{begin-table}@
| Column 1 | Column 2 | Column 3 |
|--------------------------------|
| Data 1-1 | Data 1-2 |
| Data 2-1 | | Data 2-3 |
@{end-table}@

More Complex

@{begin-table}@
| Column 1 | Column 2 | Column 3 |
|----------|----------|----------|
| Data 1-1 | Data 1-2 | Data 1-3 | 

| Data 2-1 |
// Inline comment
| Data 3-1      | Data 3-2      | Data 3-3       |
@{end-table}@

Examples are located in examples/tables.doxy

Results

Code Block

When you want to display your text in a code block, multiline or inline, you can use 3 backticks (```)

3 backticks start and end code blocks.

Examples

Inline

Here is an ```inline``` code block.

Multiline

``` Here is a multiline code block. ```

Both

Maybe you want to try ``` Something like a multiline and then ```something like ```inline``` code block.

Examples are located in examples/code-block.doxy

Results

Commands

doky has a command syntax. The syntax is @{command}@.

Any command you want to have will be in between command start (@{) and command end (}@) characters.

You can put any number of commands in between command start and end characters with comma (,) as the delimiter.

If you want to escape any string in a command block, then simply put it in between quotes ("text"). This will make that string to be interpreted as plain text.

For example:

@{c.fg.white, c.bg.red, "White on Red", c.reset}@

will put

Commands: Coloring

There are couple of coloring commands.

All coloring commands start with c prefix.

Command	Effect
`c.reset`	Resets all coloring effects
`c.bright`	Makes font color bright
`c.dim`	Makes font color dimmer
`c.underscore`	Puts underscore to text
`c.blink`	Makes text blink
`c.reverse`	Switches back and foreground color as in selected
`c.hidden`	Makes text hidden
`c.fg.black`	Black Foreground
`c.fg.red`	Red Foreground
`c.fg.green`	Green Foreground
`c.fg.yellow`	Yellow Foreground
`c.fg.blue`	Blue Foreground
`c.fg.magenta`	Magenta Foreground
`c.fg.cyan`	Cyan Foreground
`c.fg.white`	White Foreground
`c.bg.black`	Black Background
`c.bg.red`	Red Background
`c.bg.green`	Green Background
`c.bg.yellow`	Yellow Background
`c.bg.blue`	Blue Background
`c.bg.magenta`	Magenta Background
`c.bg.cyan`	Cyan Background
`c.bg.white`	White Background
`c.header`	Blue background + Black Foreground
`c.warning`	Black background + Yellow Foreground

Examples are located in examples/colors.doxy

Results

Commands: Extras

`shrug`

This command puts ¯\_(ツ⁣)_/¯ into where you put the command.

`startdate`

This command puts start date time of the application into where you put the command.

Escaping Commands

If you ever find yourself in need of escaping certain commands, like in documentation, you can use

@{"@{escaped}@"}@

"@{not escaped}@" will not be escaped since @{ and }@ will be parsed. However, @{"@{finally escaped}@"}@ will be escaped.

Examples are located in examples/extras.doxy

Results

doku.js

Doku

Features

Common Patterns

Installation

Using inside another Node app

Details

Parsing

Parsing on smaller displays

Parsing on larger displays

Terminal

Events

doku-start event

doku-end event

Actions

App Commands

Switch Command

Toggle Command

Time Command

Quit Command

Screenshots

Search Command

Searching Next by Pressing n

Frame Left

Frame Center

Content Centered

doky - Custom Documentation Syntax

Table

Examples

Simple

Missing Fields

More Complex

Code Block

Examples

Inline

Multiline

Both

Commands

Commands: Coloring

Commands: Extras

shrug

startdate

Escaping Commands

Readme

Keywords

Package Sidebar

Install

Repository

Homepage

DownloadsWeekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

`doku-start` event

`doku-end` event

Searching Next by Pressing `n`

`shrug`

`startdate`

Weekly Downloads