clvr

0.7.7 • Public • Published

🍀 Clover - The Command-Line Validator

codecov npm version Build, Test and Coverage

Clover is a simple way to validate the results of your command-line application. The test format is a JSON object that makes assertions based on the results of the executed command.

You can make assertions against stdout, stderr, files, or even a custom predicate function where you can make your own assertion.

Table of Contents

About Clover

Clover was born out of a need to validate the output and results of the Azure Functions plugin to the Serverless Framework. There were no real integration tests being run, and we needed a simple way to make sure that the plugin was still able to perform its core operations across many different configurations. I named it Clover because it was a Command-Line Validator, and it just so happened that the first beta package was released on St. Patrick's Day, 2020.

How It Works

Clover iterates across the different directories and spawns a new process for each command validation. The commands in a test are executed in a sequential chain, so if one spawned command fails (fails to run, not failed assertion), the following commands will not be spawned. This allows tests for different directories to be run at the same time and allows for assertions based on the state after executing each command.

Clover uses cross-spawn, so valid commands can be executed on any operating system.

Getting Started

This section will be your guide to using Clover within your development process

Run Your First Test

  1. Install clvr

    $ npm i clvr
  2. Create test file

    // basic.clvr.ts
    import clvr from "clvr";
     
    clvr({
      validations: [
        {
          command: "echo hello",
          stdout: {
            shouldBeExactly: "hello\n"
          }
        }
      ]
    });

    This file can be a .ts, .js or even .json file. TypeScript and JavaScript allow for more custom assertions, but if you don't need that, basic.clvr.json would work just fine. Check out our examples for TypeScript, JavaScript and JSON files.

    clvr will check the file extension and spawn the appropriate process to run the test.

  3. Add clvr to your package.json scripts section:

    {
      "scripts": {
        "clvr": "clvr"
      }
    }
  4. Run clvr

    $ npm run clvr

    You should see output that looks something like:

               _
         ___  | | __   __  _ __ 
        / __| | | \ \ / / | '__|
       | (__  | |  \ V /  | |   
        \___| |_|   \_/   |_|   
    
      Looking for tests matching pattern '**/*.clvr.@(ts|js|json)' 
      Running tests: basic.clvr.js 
      . 'echo hello' finished 
      PASSED - . - echo hello
      stdout:
      hello
      
      
      
      TEST RESULTS: 
      TOTAL: 1
      PASSED: 1
      SKIPPED: 0
      FAILED: 0 
    

Data Structures

Clover Config

clvr can accept any .json file as config, when the path is given in the CLI via the -c flag (clvr -c myconfig.json). clvr will look for clvr.config.json by default. Here is the structure of the config:

{
  "parentDir": "Path to parent of all test directories",
  "directoryFilter": "Filter for test directories",
  "testPattern": "Glob pattern for all test files. Default is **/*.clvr.@(ts|js|json)",
  "testFilter": "Filter for all test files",
  "runAsync": "Specifies if tests should be run asynchronously. Default is false"
}

A config file is not necessary. The default config could work just fine. If no parentDir or directoryFilter is specified, the tests will be run in your current working directory.

Some of these options can be specified in the command line via their respective flags:

  • parentDir = -p <value>
  • directoryFilter = -d <value>
  • testFilter = -t <value>

For help on CLI options, you can always run:

$ clvr -h

Clover Test

The default exported function takes an object of type CloverTest. Here is the structure of that object:

export interface CloverTest {
  /**
  * The only required property. Array of commands to 
  * execute along with their accompanying assertions.
  */
  validations: CommandValidation[];
  /**
   * Name of test to be used in output
  */
  name?: string;
  /**
   * Directories in which to execute the commands.
  * Relative to the current working directory.
  */
  directories?: string[];
  /**
   * String parameters for string interpolation in commands, 
  * paths or assertions. Broken down by directory.
  */
  parameters?: Parameters;
  /**
   * Should not be added by user. Because this is an
  * asynchronous process, each test result is attached to
  * the test object from which it came. The results are
  * printed out at the end of all test executions.
  */
  results?: ResultSet;
}

CommandValidation

As you can see, the only required attribute in a CloverTest is validations, which is an array of type CommandValidation. These contain the commands to execute as well as all assertions to make as a result of the command being run. Here is the structure of the CommandValidation object:

/**
 * Command to validate. Used as main configuration when defining
 * commands that need to be run and what their expected behavior is.
 */
export interface CommandValidation {
  /** 
   * Full string (including arguments) of command to run 
   */
  command: string;
  /**
   * Object that describes expected output to stdout
   */
  stdout?: ContentValidation;
  /**
   * Object that describes expected output to stderr
   */
  stderr?: ContentValidation;
  /**
   * Object that describes expected state of files in directory after test is run
   */
  files?: FileStructureValidation;
  /**
   * Custom predicate for command result
   */
  custom?: {(parameters: InterpolateParameters, directory: string, stdout: string, stderr: string): void};
  /**
   * Predicate condition that, if false, prevents the step from being run
   */
  condition?: {(directory: string): boolean};
  /**
   * Does not print stdout from command (will still print stderr)
   */
  silent?: boolean
  /**
   * Number of times to try executing the command if fails (does not retry on assertion failures)
   */
  retries?: number
}

Types of Assertions

Each command can make 0 or many assertions. Here are the types of assertions that can be used:

  • stdout - Assertions based on stdout of command
    • shouldBeExactly - string - The output should be exactly this string.
    • shouldContain - string[] - The output should contain ALL of these strings.
    • shouldNotContain - string[] - The output should contain NONE of these strings.
    • isEmpty - boolean - Specifies whether or not the output should be empty
  • stderr - Assertions based on stderr of command
    • shouldBeExactly - string - The output should be exactly this string.
    • shouldContain - string[] - The output should contain ALL of these strings.
    • shouldNotContain - string[] - The output should contain NONE of these strings.
    • isEmpty - boolean - Specifies whether or not the output should be empty
  • files - Assertions based on file states as result of command
    • shouldExist - boolean - Specifies whether or not the file should exist
    • shouldBeExactly - string - The file content should be exactly this string.
    • shouldContain - string[] - The file content should contain ALL of these strings.
    • shouldNotContain - string[] - The file content should contain NONE of these strings.
    • isEmpty - boolean - Specifies whether or not the file should exist
  • custom - (parameters: InterpolateParameters, stdout: string, stderr: string) => void - Create custom function to evaluate output. For an error to be caught by results, throw new AssertionError({message: "<your-message>"});

Helpful tip: things like npm install commands where you don't really care about the output, add silent: true to the validation object.

Examples

Simple Test

import clvr from "clvr";
 
clvr({
  name: "Simple Tests",
  validations: [
    {
      command: "echo hello",
      stdout: {
        shouldBeExactly: "hello\n"
      }
    },
    {
      command: "ls",
      stdout: {
        shouldNotContain: [
          "file.txt"
        ]
      }
    },
    {
      command: "touch file.txt",
      files: {
        "file.txt": {
          shouldExist: true,
          shouldBeExactly: ""
        }
      }
    },
    {
      command: "ls",
      stdout: {
        shouldContain: [
          "file.txt"
        ]
      },
      // You can have multiple assertion
      // types in one command validation
      files: {
        "file.txt": {
          shouldExist: true,
          shouldBeExactly: ""
        }
      }
    },
    {
      command: "rm file.txt",
      files: {
        "file.txt": {
          shouldExist: false,
        }
      }
    }
  ]
});

Simple Parameterized Test

Let's assume the following file structure:

| dirs
  | dir1
    - hello.txt
  | dir2
    - hi.txt
- test.clvr.ts
- clvr.config.json

and each of those .txt files contains hello! or hi! respectively.

We'll also assume that our clvr.config.json, located in the root of the project, looks like:

{
  "parentDir": "dirs",
}

Specifying the parentDir in our config lets clvr know to run the tests upon all child directories of dirs, which are dir1 and dir2. We can make each test specific to the directory by providing parameters for those directories in the test, and then adding ${variableStubs} where we want those parameter values to be.

We can also interpolate strings with environment variables by using the variable pattern ${env:MY_ENV_VAR}.

We'll assume that the environment variable MY_GREETING = hey;

import clvr from "clvr";
 
clvr({
  name: "Simple Parameterized Tests",
  parameters: {
    dir1: {
      value: "hello",
      fileName: "hello.txt",
    },
    dir2: {
      value: "hi",
      fileName: "hi.txt",
    }
  }
  validations[
    {
      command: "cat ${fileName}",
      stdout: {
        shouldBeExactly: "${value}"
      },
      files: {
        "${fileName}": {
          shouldExist: true,
          shouldBeExactly: "${value}"
        }
      }
    },
    {
      command: "rm ${fileName}",
      files: {
        "${fileName}": {
          shouldExist: false,
        }
      }
    },
    {
      command: "echo ${env:MY_GREETING}",
      stdout: {
        shouldBeExactly: "hey\n",
      }
    }
  ],
});

Custom Evaluator

import clvr from "clvr";
 
clvr({
  name: "Simple Parameterized Tests",
  parameters: {
    dir1: {
      value: "hello",
      fileName: "hello.txt",
    },
    dir2: {
      value: "hi",
      fileName: "hi.txt",
    }
  }
  validations[
    {
      command: "cat ${fileName}",
      custom: (parameters, directory, stdout, stderr) => {
        if (directory === "dir1") {
          console.log("Got to dir1 directory");
        }
        if (stdout !== parameters["value"] + "\n") {
          throw new AssertionError({message: "File did not have correct value"});
        }
      }
    },
    {
      command: "rm ${fileName}",
      files: {
        "${fileName}": {
          shouldExist: false,
        }
      }
    }
  ],
});

Conditional Execution

import clvr from "clvr";
 
clvr({
  name: "Simple Parameterized Tests",
  parameters: {
    dir1: {
      value: "hello",
      fileName: "hello.txt",
    },
    dir2: {
      value: "hi",
      fileName: "hi.txt",
    }
  }
  validations[
    {
      command: "cat ${fileName}",
      condition: (directory) => directory === "dirs/dir1"
    },
    {
      command: "rm ${fileName}",
      files: {
        "${fileName}": {
          shouldExist: false,
        }
      }
    }
  ],
});

Dependencies (8)

Dev Dependencies (15)

Package Sidebar

Install

npm i clvr

Weekly Downloads

14

Version

0.7.7

License

ISC

Unpacked Size

58.7 kB

Total Files

38

Last publish

Collaborators

  • tbarlow12