@ethereumjs/tx

Implements schema and functions related to Ethereum's transaction.

Note: this README reflects the state of the library from v3.0.0 onwards. See README from the standalone repository for an introduction on the last preceeding release.

INSTALL

npm install @ethereumjs/tx

USAGE

Setup

Static Constructor Methods

To instantiate a tx it is not recommended to use the constructor directly. Instead each tx type comes with the following set of static constructor methods which helps on instantiation depending on the input data format:

public static fromTxData(txData: TxData, opts: TxOptions = {}): instantiate from a data dictionary
public static fromSerializedTx(serialized: Buffer, opts: TxOptions = {}): instantiate from a serialized tx
public static fromValuesArray(values: Buffer[], opts: TxOptions = {}): instantiate from a values array

See one of the code examples on the tx types below on how to use.

All types of transaction objects are frozen with Object.freeze() which gives you enhanced security and consistency properties when working with the instantiated object. This behavior can be modified using the freeze option in the constructor if needed.

Chain and Hardfork Support

The Transaction constructor receives a parameter of an @ethereumjs/common object that lets you specify the chain and hardfork to be used. If there is no Common provided the chain ID provided as a paramter on typed tx or the chain ID derived from the v value on signed EIP-155 conforming legacy txs will be taken (introduced in v3.2.1). In other cases the chain defaults to mainnet.

Base default HF (determined by Common): istanbul

Starting with v3.2.1 the tx library now deviates from the default HF for typed tx using the following rule: "The default HF is the default HF from Common if the tx type is active on that HF. Otherwise it is set to the first greater HF where the tx is active."

Supported Hardforks:

Hardfork	Introduced	Description
`london`	`v3.2.0`	`EIP-1559` Transactions
`berlin`	`v3.1.0`	`EIP-2718` Typed Transactions, Optional Access Lists Tx Type `EIP-2930`
`muirGlacier`	`v2.1.2`	-
`istanbul`	`v2.1.1`	Support for reduced non-zero call data gas prices (EIP-2028)
`spuriousDragon`	`v2.0.0`	`EIP-155` replay protection (disable by setting HF pre-`spuriousDragon`)

Transaction Types

This library supports the following transaction types (EIP-2718):

FeeMarketEIP1559Transaction (EIP-1559, gas fee market)
AccessListEIP2930Transaction (EIP-2930, optional access lists)
Transaction, the Ethereum standard tx up to berlin, now referred to as legacy txs with the introduction of tx types

Please note that up to v3.2.0 you mandatorily had to use a Common instance for typed tx instantiation and set the hardfork in Common to minimally berlin (EIP-2930) respectively london (EIP-1559) to allow for typed tx instantiation, since the current Common release series v2 (tx type support introduced with v2.2.0) still defaults to istanbul for backwards-compatibility reasons (also see tx default HF section below).

Gas Fee Market Transactions (EIP-1559)

Class: FeeMarketEIP1559Transaction
Activation: london
Type: 2

This is the recommended tx type starting with the activation of the london HF, see the following code snipped for an example on how to instantiate:

import Common, { Chain, Hardfork } from '@ethereumjs/common'
import { FeeMarketEIP1559Transaction } from '@ethereumjs/tx'

const common = new Common({ chain: Chain.Mainnet, hardfork: Hardfork.London })

const txData = {
  "data": "0x1a8451e600000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
  "gasLimit": "0x02625a00",
  "maxPriorityFeePerGas": "0x01",
  "maxFeePerGas": "0xff",
  "nonce": "0x00",
  "to": "0xcccccccccccccccccccccccccccccccccccccccc",
  "value": "0x0186a0",
  "v": "0x01",
  "r": "0xafb6e247b1c490e284053c87ab5f6b59e219d51f743f7a4d83e400782bc7e4b9",
  "s": "0x479a268e0e0acd4de3f1e28e4fac2a6b32a4195e8dfa9d19147abe8807aa6f64",
  "chainId": "0x01",
  "accessList": [],
  "type": "0x02"
}

const tx = FeeMarketEIP1559Transaction.fromTxData(txData, { common })

Access List Transactions (EIP-2930)

Class: AccessListEIP2930Transaction
Activation: berlin
Type: 1

This transaction type has been introduced along the berlin HF. See the following code snipped for an example on how to instantiate:

import Common, { Chain, Hardfork } from '@ethereumjs/common'
import { AccessListEIP2930Transaction } from '@ethereumjs/tx'

const common = new Common({ chain: Chain.Mainnet, hardfork: Hardfork.Berlin })

const txData = {
  "data": "0x1a8451e600000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
  "gasLimit": "0x02625a00",
  "gasPrice": "0x01",
  "nonce": "0x00",
  "to": "0xcccccccccccccccccccccccccccccccccccccccc",
  "value": "0x0186a0",
  "v": "0x01",
  "r": "0xafb6e247b1c490e284053c87ab5f6b59e219d51f743f7a4d83e400782bc7e4b9",
  "s": "0x479a268e0e0acd4de3f1e28e4fac2a6b32a4195e8dfa9d19147abe8807aa6f64",
  "chainId": "0x01",
  "accessList": [
    {
      "address": "0x0000000000000000000000000000000000000101",
      "storageKeys": [
        "0x0000000000000000000000000000000000000000000000000000000000000000",
        "0x00000000000000000000000000000000000000000000000000000000000060a7"
      ]
    }
  ],
  "type": "0x01"
}

const tx = AccessListEIP2930Transaction.fromTxData(txData, { common })

For generating access lists from tx data based on a certain network state there is a reportAccessList option on the Vm.runTx() method of the @ethereumjs/vm TypeScript VM implementation.

Legacy Transactions

Class: Transaction
Activation: chainstart (with modifications along the road, see HF section below)
Type: 0 (internal)

Legacy transaction are still valid transaction within Ethereum mainnet but will likely be deprecated at some point. See this example script or the following code example on how to use.

import Common, { Chain } from '@ethereumjs/common'
import { Transaction } from '@ethereumjs/tx'

const txParams = {
  nonce: '0x00',
  gasPrice: '0x09184e72a000',
  gasLimit: '0x2710',
  to: '0x0000000000000000000000000000000000000000',
  value: '0x00',
  data: '0x7f7465737432000000000000000000000000000000000000000000000000000000600057',
}

const common = new Common({ chain: Chain.Mainnet })
const tx = Transaction.fromTxData(txParams, { common })

const privateKey = Buffer.from(
  'e331b6d69882b4cb4ea581d88e0b604039a3de5967688d3dcffdd2270c0fd109',
  'hex',
)

const signedTx = tx.sign(privateKey)

const serializedTx = signedTx.serialize()

Transaction Factory

If you only know on runtime which tx type will be used within your code or if you want to keep your code transparent to tx types, this library comes with a TransactionFactory for your convenience which can be used as follows:

import Common, { Chain, Hardfork } from '@ethereumjs/common'
import { TransactionFactory } from '@ethereumjs/tx'

const common = new Common({ chain: Chain.Mainnet, hardfork: Hardfork.Berlin })

const txData = {} // Use data from the different tx type examples
const tx = TransactionFactory.fromTxData(txData, { common })

if (tx.supports(Capability.EIP2930AccessLists)) {
  // Do something which only makes sense for txs with support for access lists
}

The correct tx type class for instantiation will then be chosen on runtime based on the data provided as an input.

TransactionFactory supports the following static constructor methods:

public static fromTxData(txData: TxData | AccessListEIP2930TxData, txOptions: TxOptions = {}): TypedTransaction
public static fromSerializedData(data: Buffer, txOptions: TxOptions = {}): TypedTransaction
public static fromBlockBodyData(data: Buffer | Buffer[], txOptions: TxOptions = {})

Sending a Transaction

L2 Support

This library has been tested to work with various L2 networks (v3.3.0+). All predefined supported custom chains introduced with Common v2.4.0 or higher are supported, the following is a simple example to send a tx to the xDai chain:

import { Transaction } from '@ethereumjs/tx'
import Common from '@ethereumjs/common'

const from = 'PUBLIC_KEY'
const PRIV_KEY = process.argv[2]
const to = 'DESTINATION_ETHEREUM_ADDRESS'

const common = Common.custom(CustomChain.xDaiChain)

const txData = {
  from,
  nonce: 0,
  gasPrice: 1000000000,
  gasLimit: 21000,
  to,
  value: 1,
}

const tx = Transaction.fromTxData(txData, { common })
const signedTx = tx.sign(Buffer.from(PRIV_KEY, 'hex'))

The following L2 networks have been tested to work with @ethereumjs/tx, see usage examples as well as some notes on pecularities in the issues linked below:

L2 Network	Common name	Issue
Arbitrum Rinkeby Testnet	`CustomChain.ArbitrumRinkebyTestnet`	#1290
Polygon Mainnet	`CustomChain.PolygonMainnet`	#1289
Polygon Mumbai Testnet	`CustomChain.PolygonMumbai`	#1289
xDai Chain	`Common.xDaiChain`	#1323

For a non-predefined custom chain it is also possible to just provide a chain ID as well as other parameters to Common:

const common = Common.custom({ chainId: 1234 })

Special Topics

Signing with a hardware or external wallet

To sign a tx with a hardware or external wallet use tx.getMessageToSign(false) to return an EIP-155 compliant unsigned tx.

A legacy transaction will return a Buffer list of the values, and a Typed Transaction (EIP-2718) will return the serialized output.

Here is an example of signing txs with @ledgerhq/hw-app-eth as of v6.5.0:

import { Transaction, FeeMarketEIP1559Transaction } from '@ethereumjs/tx'
import Common, { Chain } from '@ethereumjs/common'
import { rlp } from 'ethereumjs-util'
import Eth from '@ledgerhq/hw-app-eth'

const eth = new Eth(transport)
const common = new Common({ chain: Chain.Rinkeby })

let txData: any = { value: 1 }
let tx: Transaction | FeeMarketEIP1559Transaction
let unsignedTx: Buffer[] | Buffer
let signedTx: typeof tx
const bip32Path = "44'/60'/0'/0/0"

const run = async () => {
  // Signing a legacy tx
  tx = Transaction.fromTxData(txData, { common })
  unsignedTx = tx.getMessageToSign(false)
  unsignedTx = rlp.encode(unsignedTx) // ledger signTransaction API expects it to be serialized
  let { v, r, s } = await eth.signTransaction(bip32Path, unsignedTx)
  txData = { ...txData, v, r, s }
  signedTx = Transaction.fromTxData(txData, { common })
  let from = signedTx.getSenderAddress().toString()
  console.log(`signedTx: 0x${signedTx.serialize().toString('hex')}\nfrom: ${from}`)

  // Signing a 1559 tx
  txData = { value: 1 }
  tx = FeeMarketEIP1559Transaction.fromTxData(txData, { common })
  unsignedTx = tx.getMessageToSign(false)
  ;({ v, r, s } = await eth.signTransaction(bip32Path, unsignedTx)) // this syntax is: object destructuring - assignment without declaration
  txData = { ...txData, v, r, s }
  signedTx = FeeMarketEIP1559Transaction.fromTxData(txData, { common })
  from = signedTx.getSenderAddress().toString()
  console.log(`signedTx: ${signedTx.serialize().toString('hex')}\nfrom: ${from}`)
}

run()

Fake Transaction

Creating a fake transaction for use in e.g. VM.runTx() is simple, just overwrite getSenderAddress() with a custom Address like so:

import { Address } from 'ethereumjs-util'
import { Transaction } from '@ethereumjs/tx'

_getFakeTransaction(txParams: TxParams): Transaction {
  const from = Address.fromString(txParams.from)
  delete txParams.from

  const opts = { common: this._common, freeze: false }
  const tx = Transaction.fromTxData(txParams, opts)

  // override getSenderAddress
  tx.getSenderAddress = () => { return from }

  return tx
}

API

Documentation

EthereumJS

See our organizational documentation for an introduction to EthereumJS as well as information on current standards and best practices.

If you want to join for work or do improvements on the libraries have a look at our contribution guidelines.

LICENSE

MPL-2.0

@gxchain2-ethereumjs/tx

@ethereumjs/tx

INSTALL

USAGE

Setup

Static Constructor Methods

Chain and Hardfork Support

Transaction Types

Gas Fee Market Transactions (EIP-1559)

Access List Transactions (EIP-2930)

Legacy Transactions

Transaction Factory

Sending a Transaction

L2 Support

Special Topics

Signing with a hardware or external wallet

Fake Transaction

API

EthereumJS

LICENSE

Dependencies (2)

Dev Dependencies (17)

Package Sidebar

Install

Repository

Homepage

Weekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

@gxchain2-ethereumjs/tx

@ethereumjs/tx

INSTALL

USAGE

Setup

Static Constructor Methods

Chain and Hardfork Support

Transaction Types

Gas Fee Market Transactions (EIP-1559)

Access List Transactions (EIP-2930)

Legacy Transactions

Transaction Factory

Sending a Transaction

L2 Support

Special Topics

Signing with a hardware or external wallet

Fake Transaction

API

EthereumJS

LICENSE

Dependencies (2)

Dev Dependencies (17)

Package Sidebar

Install

Repository

Homepage

DownloadsWeekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

Weekly Downloads