@andybalham/state-machine-builder

State Machine Builder

A fluent builder interface for defining state machines in CDK.

Two versions are supported:

• The CDK v1 version is @andybalham/agb-cdk-state-machine-builder
• The CDK v2 version is @andybalham/agb-cdk-state-machine-builder-v2

Usage

State machine definitions in CDK are defined using a nested structure. Consider the following example with a sequence of four states:

const stack = new cdk.Stack();

const state1 = new sfn.Pass(stack, 'State1');
const state2 = new sfn.Pass(stack, 'State2');
const state3 = new sfn.Pass(stack, 'State3');
const state4 = new sfn.Pass(stack, 'State4');

new sfn.StateMachine(stack, 'ChainExample', {
  definition: sfn.Chain.start(state1.next(state2.next(state3.next(state4))))
});

Using the fluent builder, the same state machine is defined as follows:

new sfn.StateMachine(stack, 'ChainExample', {
  definition: new StateMachineBuilder()

    .perform(state1)
    .perform(state2)
    .perform(state3)
    .perform(state4)

    .build(stack),
});

IMHO, this approach reads better, is easier to maintain, plays nicer with Prettier, and results in more meaningful differences in pull requests.

Wait and Pass States

Wait and Pass states can added to a state machine either by using the perform method, or by using the pass or wait methods for a little more convenience as the scope parameter is passed in automatically when the build method is called.

new sfn.StateMachine(stack, 'WaitAndPassExample', {
  definition: new StateMachineBuilder()

    .wait('Wait1', {
      time: sfn.WaitTime.duration(cdk.Duration.seconds(1)),
    })

    .pass('Pass1', {
      comment: 'This is pass state 1',
    })

    .build(stack),
});

Choice States

Choice states are defined using references to the id of the target states rather than the state itself. This allows us to avoid nesting states within states when defining the branching. See the example below where a choice has three branches, two with conditions attached, along with a default branch if none of the conditions evaluate to true.

new sfn.StateMachine(stack, 'ChoiceExample', {
  definition: new StateMachineBuilder()

    .choice('Choice1', {
      choices: [
        { when: sfn.Condition.stringEquals('$.var1', 'Foo'), next: state1.id },
        { when: sfn.Condition.stringEquals('$.var1', 'Bar'), next: state2.id },
      ],
      otherwise: state3.id,
    })

    .perform(state1)
    .end()

    .perform(state2)
    .end()

    .perform(state3)

    .build(stack),
});

Next statements

The next statement is used to explicitly define the next state in the flow. Consider the following example, where there is a choice between two states (state1 and state2) followed by a common state (state3). The next statement is used after state1 to prevent the flow from going to state2.

new sfn.StateMachine(stack, 'ChoiceExample', {
  definition: new StateMachineBuilder()

    .choice('Choice1', {
      choices: [{ when: sfn.Condition.booleanEquals('$.var1', true), next: state1.id }],
      otherwise: state2.id,
    })

    .perform(state1)
    .next(state3.id)

    .perform(state2)

    .perform(state3)

    .build(stack),
});

Succeed and Fail States

Succeed and Fail states are added using the succeed and fail methods, passing in an id and optional properties. Succeed and Fail states are always terminal states, so it is not necessary to have an end method call after them.

new sfn.StateMachine(stack, 'SucceedAndFailExample', {
  definition: new StateMachineBuilder()

    .choice('Choice1', {
      choices: [
        { when: sfn.Condition.stringEquals('$.var1', 'Foo'), next: 'Succeed1' },
        { when: sfn.Condition.stringEquals('$.var1', 'Bar'), next: 'Succeed2' },
      ],
      otherwise: 'Fail1',
    })

    .succeed('Succeed1', {
      comment: 'Success 1',
    })

    .succeed('Succeed2', {
      comment: 'Success 2',
    })

    .fail('Fail1', {
      comment: 'Failure 1',
    })

    .build(stack),
});

Map States

Map states are defined by specifying a StateMachineBuilder instance for the iterator property.

new sfn.StateMachine(stack, 'MapExample', {
  definition: new StateMachineBuilder()

    .map('Map1', {
      itemsPath: '$.Items1',
      iterator: new StateMachineBuilder()
        .perform(state1)
        .perform(state2)
        .perform(state3),
    })

    .build(stack);
}

Parallel States

Parallel states are defined by specifying an array of StateMachineBuilder instances for the branches property.

new sfn.StateMachine(stack, 'ParallelExample', {
  definition: new StateMachineBuilder()

    .parallel('Parallel1', {
      branches: [
        new StateMachineBuilder()
          .perform(state1)
          .perform(state2),
        new StateMachineBuilder()
          .perform(state3)
          .perform(state4),
      ],
    })

    .build(stack);
}

Lambda Invoke

The lambdaInvoke method provides a way of adding states that invoke a Lambda function as a task. As well as providing a little syntactic sugar, default props can be passed in to the build method. In the following example, default values for retryOnServiceExceptions and payloadResponseOnly are specified via the build method, but the LambdaInvoke2 overrides the value for retryOnServiceExceptions. The example also shows how the parameters property provides a simplified way of defining an object payload and how the retry properties are specified.

new sfn.StateMachine(stack, 'LambdaInvokeExample', {
  definition: new StateMachineBuilder()

    .lambdaInvoke('LambdaInvoke1', {
      lambdaFunction: function1,
      parameters: {
        constant: 'ConstantValue',
        'dynamic.$': '$.dynamicValue',
      },
      retry: { maxAttempts: 3 },
    })

    .lambdaInvoke('LambdaInvoke2', {
      lambdaFunction: function2,
      retryOnServiceExceptions: true,
    })

    .build(definitionScope, {
      defaultProps: {
        lambdaInvoke: {
          retryOnServiceExceptions: false,
          payloadResponseOnly: true,
        },
      },
    });
}

Error Handling

Error handlers are specified by supplying an array of catch instances as part of the props passed to the tryPerform, lambdaInvoke, map, and parallel methods. Each catch instance specifies the errors that are handled and the id of the handling state.

new sfn.StateMachine(stack, 'ErrorHandlingExample', {
  definition: new StateMachineBuilder()

    .tryPerform(function1, {
      catches: [
        { errors: ['States.Timeout'], handler: catchAll.id },
        { errors: ['States.All'], handler: catchAll.id },
      ],
    })
    .map('Map1', {
      itemsPath: '$.Items1',
      iterator: new StateMachineBuilder()
        .perform(state1)
        .perform(state2),
      catches: [{ handler: catchAll.id }],
    })
    .parallel('Parallel1', {
      branches: [
        new StateMachineBuilder().perform(state3),
        new StateMachineBuilder().perform(state4)],
      catches: [{ handler: catchAll.id }],
    })
    .end()

    .perform(catchAll)

    .build(stack);
}